If Allow users on interface is checked
-
If Allow users on interface is checked on my proxy server, load balancing is not working only the WAN1 is being used by pfsense, but if i 'unchecked' load balance works fine.
running pfsense 1.2 release
thanks
-cruzades -
Can you provide some more info on your setup? This is by far not enough to even guess what's wrong.
-
if that is "checked":
1. upon checking my ip at www.myip.dk, it displays only my WAN1's ip even after clicking it every 5 seconds.
2. squidguard works perfectly with that setup.
if that is "unchecked"
1. upon checking my ip at www.myip.dk, it displays my WAN1's ip and WAN2's ip alternately after clicing it every 5 seconds.
2. squidguard don't block anymore.
-
here is the activity graph
-
None of the services running directly at pfSense (like squid) can make use of multiwan currently. They'll only utilize the main wan. This is a known limitation.
-
i wanted to filter both WAN's, is there a workaround for this yet?
-
Not in 1.2 but that might be possible in 1.3 (not definately sure yet). If you can run the squid behind the pfSense on a different machine it would be possible as then the squid traffic is going through the firewall and can therefore can make use of multiwan.