RUN IN SAFE MODE
-
I've tried to install pfsense live cd 1.2 but cannot run in normal mode so I ran it in safe mode (option 3)
it reports many errors in normal mode1. what are the limitation in safe mode ?
2. can i make it default in safe mode in order to make no setting when the pfsense restart ? (i don't want to reinstall it)
3. how many wan and lan can i use maximum ?
thanx a lot
-
This is a question I've been wondering myself. Is there a boot option we can set that will not look for config.xml and instead use the default setup and launch the assign interfaces page? From my experience safe mode does not behave this way.
-
when pfSense running, it shows many warnings
ex:
ad2: WARNING - READ_DMA UDMA ICRC error (retrying request) LBA=xxxxxxxxx
what is wrong with the system ?
it runs automatically on single user mode
if i choose option 3 (safe mode) on welcome screen, it runs normally and shows the pfSense Console Setup, and setup via web
-
Try to disable UDMA. See http://devwiki.pfsense.org/BootOptions for how to do that and how to make it default.
-
Try to disable UDMA. See http://devwiki.pfsense.org/BootOptions for how to do that and how to make it default.
thancs tho HOBA, i have tried what you've wrote, and its work
i have new problem now, i cant open the web configurator. I cant ping the lan interface, always show messeges :
rl0 watchdog timeout
rl1 watchdog timeout
rl2 watchdog timeoutall my ehernet interfaces doesnt work. i shows not a normal detection on my ethernet switch. i try to move the ethernet card to other pc, it works ok.
i don't whats the problem. i think my cpu is in trouble.
any idea ??? ??? ???
-
Try to disable UDMA. See http://devwiki.pfsense.org/BootOptions for how to do that and how to make it default.
thancs tho HOBA, i have tried what you've wrote, and its work
i have new problem now, i cant open the web configurator. I cant ping the lan interface, always show messeges :
rl0 watchdog timeout
rl1 watchdog timeout
rl2 watchdog timeoutall my ehernet interfaces doesnt work. i shows not a normal detection on my ethernet switch. i try to move the ethernet card to other pc, it works ok.
i don't whats the problem. i think my cpu is in trouble.
any idea ??? ??? ???
You may want to check the hardware compatability list to make sure your NICs are there - if not it is hit or miss…
gm...