Thinking of dumping smothwall but first….

If you have the possibility of taking box down a while you could try and run the "livecd" and see if you get upp all nics

/F

jahonix

Have you tried looking up your card in the FreeBSD Hardware compatibility list?
http://www.freebsd.org/releases/6.2R/hardware-i386.html

If it's in there, chances are that it's working. If not you gotta try.

kingtux

I will try and check hardware compatibity list I will report back if it works maybe it can help others….Also what version of bsd is running on pfsense 1.2??

kingtux

Just looked up the hardware in that list and I only see the ZX3XX version…And i believe the card on ip330 is ZX412 Bummer :(

Cry Havok

As jahonix's post suggests, 6.2 (Release).

kingtux

Hmmmms so I guess it won't work :( damn it

hoba

I would do a test with the livecd or embedded version. I think I have heard from users that they got all their ports working on the nokia hardware but maybe they had different nics.

kingtux

Thanks to all who posted….I installed pfsense on an extra harddrive I had laying around and to my surprise the dual nic I was worried about worked on 1st try....Ironic is that the on-board nics got bad MAC addy's ff:ff:ff:ff but I'm sure I can spoof those since they are intel cards.... Any way I can now dump smoothwall!!

hoba

The bad macs on nokia is caused by the hardware. Search the forum for how to spoof them. There's a guide around somewhere for that hardware iirc.

dotdash

There is some pretty detailed information on the m0n0wall forum if you search for nokia there. I'm not sure it applies to ip330, but you could take a look.