Lightsquid - monthly view - graph gives 500 - Internal Server Error

fribert

I replaced 1.7.1_1 version to 1.7.1
(1.7.1_1 may be for FreeBSD 7.x/pfSense 1.3)
Now clean installations must be correct.
For fix 500 error liikong link from post before
–-
Also adding squid configuring for LS (log options).

Thanks all

Hi DVSerg

Thankyou very much

fribert

@dvserg:

I replaced 1.7.1_1 version to 1.7.1
(1.7.1_1 may be for FreeBSD 7.x/pfSense 1.3)
Now clean installations must be correct.
For fix 500 error liikong link from post before
–-
Also adding squid configuring for LS (log options).

Ok, so I did an uninstall of the old package, installed the new 1.7.1 package.
Did a refreshm just to test, still got error 500
Then I downloaded the new (old) perl and moved it to the correct spot.
Did a refresh, tested, still got error 500
Then I rebooted.
Did a full refresh, tested, still getting an error 500, so…

mhab12

I've un-installed and re-installed lightsquid here as well, on 1.2b3 (for squid reasons) but I'm still getting 500 error too…

dvserg

May be you have old problem from 1.7.1_1
Download
http://diskatel.narod.ru/libperl.so
and replace
/usr/local/lib/perl5/5.8.8/mach/CORE/libperl.so

fribert

@fribert:

Ok, so I did an uninstall of the old package, installed the new 1.7.1 package.
Did a refreshm just to test, still got error 500
Then I downloaded the new (old) perl and moved it to the correct spot.
Did a refresh, tested, still got error 500
Then I rebooted.
Did a full refresh, tested, still getting an error 500, so…

As mentioned, I DID get the special perl, and tried to refresh the lightsquid pages.

dvserg

What WebGUI proto you use (http or https)?

mhab12

I'm on HTTPS…

fribert

I use the HTTPS as well.

dvserg

500 - Internal Server Error in any LS report, or only monthly view?
–
I tested all pages on https and not found any error :(

fribert

Very odd, I only see it in the monthly graph, everything else works, and get's updated…

dvserg

I only see it in the monthly graph

Pls checking pfSense Status->RRD Graphs
Thit's work?

fribert

Yes, the RRD graphs are shown nicely.

dvserg

Possible setut GUI http access and checking monthly graph?
Also need checking permissions /usr/local/www/lightsquid/ files - i have 'www' & 0555(r-xr-xr-r) for all, exclude .htaccess

fribert

ls -l

total 100
-r–r--r-- 1 www www 56 Mar 24 2007 .htaccess
-r-xr-xr-x 1 www www 2307 Mar 24 2007 bigfiles.cgi
-r-xr-xr-x 1 www www 2556 Mar 24 2007 check-setup.pl
-r-xr-xr-x 1 www www 9185 Mar 24 2007 common.pl
-r-xr-xr-x 1 www www 4740 Mar 24 2007 day_detail.cgi
-r-xr-xr-x 1 www www 1324 Mar 24 2007 fixreport.pl
-r-xr-xr-x 1 www www 1210 Mar 24 2007 get.cgi
-r-xr-xr-x 1 www www 10054 Mar 24 2007 graph.cgi
-r-xr-xr-x 1 www www 6710 Mar 24 2007 group_detail.cgi
-r-xr-xr-x 1 www www 7015 Mar 24 2007 index.cgi
-r-xr-xr-x 1 www www 16353 Mar 24 2007 lightparser.pl
-r-xr-xr-x 1 www www 3779 Mar 24 2007 month_detail.cgi
-r-xr-xr-x 1 www www 4757 Mar 24 2007 topsites.cgi
drwxr-xr-x 6 root wheel 512 Apr 9 22:04 tpl
-r-xr-xr-x 1 www www 4038 Mar 24 2007 user_detail.cgi
-r-xr-xr-x 1 www www 3132 Mar 24 2007 user_month.cgi
-r-xr-xr-x 1 www www 4049 Mar 24 2007 user_time.cgi
-r-xr-xr-x 1 www www 3572 Mar 24 2007 whousesite.cgi

This is how it looks here, I've changed the loginpage to http, no change.

Best regards