Cant reach 195.x.x.x from 192.168.x.x when filtering bridge is on *SOLVED*

[Guest]

i have a vlan called dmz1vlan93 which i have bridged with wan and a webserver with a 195.x.x.x address
it works fine to access the ip from the outside even with filtering on(and rules allowing that)

but i just cant seem to make the box accessible from 192.168.x.x when enabling filtering bridge.

i can see in the syslog that it´s getting trough but nothing else happends.

what could be the couse of that?, i tried with allowing anything everywhere on the 2 involved interfaces(dmz1vlan93 and wan) and still nothing

also tried with Manual Outbound NAT rule generation (Advanced Outbound NAT (AON))
but still nothing

regards /Fredrik

edit1
got it working…yeay!

[hoba]

Could you share your wisdom so other might find this solution when running into a similiar problem  ;)

[Guest]

i´ll give it a go

This asumes that you get traffic into your dmz box

this is how i did to be able to use port 81(administration of webserver in my case) on my dmz server

also had nat reflection turned on system -> advanced -> Disable NAT Reflection (not checked)
hope someone finds´em usefull

/Fredde

[hoba]

Thanks  :)