Opt2 subnet being blocked
-
I have kind of a unique situation one of my isps is a wireless that keeps everyone on the same subnet. everything works great on my setup, dual wan over two isps one being the wireless, but I do have one thing that I'm trying to get around but I don't understand why it's happening
A quick overview of my network, and the network of two of my other locations the first is a dual wan setup with failover.
lan–- --wan(xxx.xxx.1.109/29)
|pfsense| location 1
wlan-- --opt1(xxx.xxx.2.211/24)lan-- |pfsense|--wan(xxx.xxx.2.213/24) location 2
lan-- |pfsense|--wan(xxx.xxx.2.214/24) location 3
locations 2 and 3 are on the same subnet as the opt1 interface at location 1
the problem is that traffic if going in and out fine to everywhere but the 2 and 3 location, the mail gets forwarded properly unless it's sent to location 1 from 2 or 3 and it's the same with all ports that I've forwarded, I've added rules to location 1 on all the interfaces to allow any traffic from that subnet but it is still blocking the traffic, has anyone seen this or know a work around?also just as a side note, the traffic from the opt1 subnet is blocked on both interfases at location 1.
--Brady
-
Try to traceroute back and forth and check if the routes are different. This will break statefulness. Maybe you are missing a route somewhere or your multiwan rules are sending out packets to the wrong gateway.