EMule HighID but KAD firewalled?

ahpaul · Apr 15, 2008, 8:00 PM

Hi, I installed pfSense 1.2 and everything works fine, just when I port forward for the eMule is not working properly, or should I pay attention to any field?

Thanks

GruensFroeschli · Apr 15, 2008, 8:26 PM

Can you show a screenshot of your forward rules? (NAT and firewall)

ahpaul · Apr 18, 2008, 8:54 AM

Hi, I'm sorry that I reply so late, my computer just damned.

Anyway I've attached the capture of NAT & firewall rules.

The port I used is TCP 5000 & UDP 5000,
it's working fine with my Aztech 600E router,
just don't know it stops working after I switched to pfsense.

ahpaul · Apr 18, 2008, 10:52 AM

and note that I've put UDP as any other port like 5001, 5050, also not working in pfsense

Anybody having the same prob?

GruensFroeschli · Apr 18, 2008, 11:45 AM

i dont see any attachment ;)

jahonix · Apr 18, 2008, 1:22 PM

You need two ports for eMule and they have to be at least 10 numbers apart to work properly.
These have to be entered in the apropriate config fields in the application as well.

ahpaul · Apr 18, 2008, 1:24 PM

ahpaul · Apr 22, 2008, 11:37 AM

Hi, I've changed to default port of TCP4662 & UDP4672, and i found interesting log:

All my UDP being blocked!!!

hoba · Apr 22, 2008, 11:13 PM

@ahpaul:

All my UDP being blocked!!!

Yes, and you should be happy about that because that means the firewall is working!!! Check the ports that get blocked. They don't have to do anything with your portforwards at all.

ahpaul · Apr 26, 2008, 3:50 AM

@hoba:

@ahpaul:

All my UDP being blocked!!!

Yes, and you should be happy about that because that means the firewall is working!!! Check the ports that get blocked. They don't have to do anything with your portforwards at all.

Well, I know it's working fine, but why my eMule KAD still getting blocked?