EMule HighID but KAD firewalled?

[ahpaul]

Hi, I installed pfSense 1.2 and everything works fine, just when I port forward for the eMule is not working properly, or should I pay attention to any field?

Thanks

[GruensFroeschli]

Can you show a screenshot of your forward rules? (NAT and firewall)

[ahpaul]

Hi, I'm sorry that I reply so late, my computer just damned.

Anyway I've attached the capture of NAT & firewall rules.

The port I used is TCP 5000 & UDP 5000,
it's working fine with my Aztech 600E router,
just don't know it stops working after I switched to pfsense.

[ahpaul]

and note that I've put UDP as any other port like 5001, 5050, also not working in pfsense

Anybody having the same prob?

[GruensFroeschli]

i dont see any attachment ;)

[jahonix]

You need two ports for eMule and they have to be at least 10 numbers apart to work properly.
These have to be entered in the apropriate config fields in the application as well.

[ahpaul]

[ahpaul]

Hi, I've changed to default port of TCP4662 & UDP4672, and i found interesting log:

All my UDP being blocked!!!

[hoba]

@ahpaul:

All my UDP being blocked!!!

Yes, and you should be happy about that because that means the firewall is working!!! Check the ports that get blocked. They don't have to do anything with your portforwards at all.

[ahpaul]

@hoba:

@ahpaul:

All my UDP being blocked!!!

Yes, and you should be happy about that because that means the firewall is working!!! Check the ports that get blocked. They don't have to do anything with your portforwards at all.

Well, I know it's working fine, but why my eMule KAD still getting blocked?