Assign p2p trafic to WAN1
-
Hi , im n00b to pfsense, i have 2 WANs .first wan's speed is 8Mbps and the second wan's speed is 512Kbps , i want to make that all p2p trafic to go through the WAN1, the 8Mbps one , and all other trafic like web browsing mail to go through the second wan.These 2 lines are from different ISPs , i have set them up,failover and loadbalance is running,both links are up.
WAN1(8Mbps)–-------|
|---Pfsense-----LAN
WAN2(512Kbps)------Please help me
Thank You
P.s.sorry for my english
-
Set your p2p program to use port 27777
Then nat that port to your pc 192.168.1.222
make a lan rule with 192.168.1.222 using gateway wan1I need to correct myself :) cause i use a dedicated ubuntu pc for p2p
So if you have 1 pc doing the p2p you can control the traffic to that one. -
Thank You ,
i have 2 pc that will use p2p, i want both of them to use wan1 when downloading torrents
here is what im going to do:Firewall->nat->port Forward
Interface –--------WAN1
External Adress-----ANY
Protocol-----------TCP
External port range-???? need help here :P
NAT IP------------- <my pc="" ip="">Local port----------27777Then LAN rule:
Interface LAN
Protocol TCP
Source Network
<my pc="" ip="">/24
Destination any
Destination port range any
Gateway Wan1Fails.ToWan2is this correct?
thx</my></my>
-
External port is also 27777 for 2nd pc it could be 28888
set your protocol on the lan rule to any -
Thank you for your help , i set it up , it worked for a while , then , when i changed the port in utorrent , it went like it should through the WAN2 (512kbps) , and when i changed in utorrent the port back it wont go throught WAN1 it continues to go throught WAN2 :( what is wrong with it? the main lan rule that is allowing everything is assigned to go through gateway WAN2 , and the rule with port 27777 to go through gateway WAN1, still the conections on 27777 go to WAN2…. :(
-
Diagnostics -> States reset states