Lightsquid package Test
-
squid:
– Enable log option
-- Set log path as /var/squid/log
-- use squid 5-10 min (web browsing trough squid)
lightsquid
-- click Refresh_now
-- goto Lightsquid tab -
Everything's done as you suggested, yet it still gives the exact same message as I posted. What am I missing?
-
This message man only, what LS not have information in his DB. For update information to LS db need have enabling squid log and squid must create log file in '/var/squid/log'.
Can you checking /var/squid/log/access.log file for exists? -
Access.log exists in /var/squid/log/, however it's empty…shocker right!
-
I don;t know how or why, but it seems to be working perfectly now. Thanks for the help!
-Marty
-
This message man only, what LS not have information in his DB. For update information to LS db need have enabling squid log and squid must create log file in '/var/squid/log'.
Can you checking /var/squid/log/access.log file for exists?I'm experiencing the same issue, I've already reinstalled squid and lightsquid and repeat the same process thrice with futile results, /var/squid/log/access.log exists but empty, cache log though is not. I have 2 new pfsense deployment having this same issue but in my previous installations everything is working fine, I have no idea why this is happening, any ideas how to resolve this?
TIA
-
@jan:
This message man only, what LS not have information in his DB. For update information to LS db need have enabling squid log and squid must create log file in '/var/squid/log'.
Can you checking /var/squid/log/access.log file for exists?I'm experiencing the same issue, I've already reinstalled squid and lightsquid and repeat the same process thrice with futile results, /var/squid/log/access.log exists but empty, cache log though is not. I have 2 new pfsense deployment having this same issue but in my previous installations everything is working fine, I have no idea why this is happening, any ideas how to resolve this?
Squid must work some time for not-empty /var/squid/log/access.log
Also check permissions. -
Squid has been running for quite sometime now, more than 2 days already. What should be the correct file permission?
I know it's quite odd, I have a previous install way back and it's working alright but I can't seem to figure out this one.
-
@jan:
Squid has been running for quite sometime now, more than 2 days already. What should be the correct file permission?
I know it's quite odd, I have a previous install way back and it's working alright but I can't seem to figure out this one.
Access.log must have 'proxy' owner
Also check squid config gui for enable LOG option. -
@jan:
Squid has been running for quite sometime now, more than 2 days already. What should be the correct file permission?
I know it's quite odd, I have a previous install way back and it's working alright but I can't seem to figure out this one.
Access.log must have 'proxy' owner
Also check squid config gui for enable LOG option.As you can see from the output of ls -l below, access.log is owned by proxy and was already rotated however it's an empty file. Log enabled option in squid is also enabled as I've mentioned awhile back.
LigthSquid diagnostic.
Error : report folder '/var/lightsquid/report' not contain any valid data! Please run lightparser.pl (and check 'report' folder content)
Please check config file !
Variable value
$tplpatph /usr/local/www/lightsquid/tpl
$templatename base
$langpatph /usr/local/share/lightsquid/lang
$langname eng
$reportpath /var/lightsquid/report
Access to '/var/lightsquid/report' folder yes -
Do yuo click 'full refresh' button on LS gui?
-
Do yuo click 'full refresh' button on LS gui?
Yes I did, I click both Refresh Now and Refresh full to no avail. I have another pfsense deployment yesterday and squid/lightsquid package works just fine, I can't seem to figure out this one though, perhaps a hard drive failure?