Can’t access pfsense after a while
-
Hi
I’ve installed pfsense as follow
ADSL modem 192.168.0.1
Switch
pfsense wan:192.168.0.2 –lan: 192.168.0.3
testPC 192.168.0.10
The “test configuration” as shown above works fine!
When I do the next setup I can use internet for about 15min and then it won’t work.
Strange thing is that I can ping and browse to my ADSL modem but not to the lan of pfsense.ADSL modem 192.168.0.1
pfsense wan:192.168.0.2 –lan: 192.168.0.3
Switch
complete network 192.168.0.21 - 192.168.0.30
Anyone an idea ?
-
You have Lan on the same subnet as wan?
I would do
If not dhcp wan 192.168.0.x /24
lan 10.10.10.x /24 -
Will this be a problem?
I did this because I have to change all my local PC's IP and gateway addresses.
Can I use 10.0.0.1 for my ADSL modem and the WAN of pfsense and 192.168.x.x for my local PC's? -
Yes it will be a problem
Yes you can do that.
(10.0.0.1 for the modem and 10.0.0.2 for the pfSense WAN with gateway 10.0.0.1) -
Thanks for the information. I will try and let know if it works fine.