Ive got a problem! Cant access Server network from Lan network
-
HI there..
I got a bit of a problem.
I have one lan network and one Server network.
Lan network is on 192.168.0.0/24 and server network is on 192.168.1.0/24. Both is able to connect to the internet but not to each other. I cant ping my normal computer from the server and vise versa.
LAN interface (fxp0) Status up MAC address 00:08:c7:f3:1c:c8 IP address 192.168.0.1 Subnet mask 255.255.255.0 Media 100baseTX <full-duplex>In/out packets 5315/7076 (898 KB/6.07 MB) In/out errors 0/0 Collisions 0</full-duplex>
Serv interface (fxp2) Status up MAC address 00:50:8b:ac:52:1e IP address 192.168.2.1 Subnet mask 255.255.255.0 Media 100baseTX <full-duplex>In/out packets 0/0 (0 bytes/32 KB) In/out errors 0/0 Collisions 0</full-duplex>
and the rules
Server side
* * * * * * * Serv net * LAN net * *
Lan side
* * * * * * * LAN net * Serv net * *
What shall i do to solv this problem? I have just done a fresh install.
-
Recheck every clients used and unused network card setting, maybe a wrong gateway or could it be a client firewall
-
I have deactivated both Windows Vistas firewall and Windows 2003 firewall.
In the normal/server computer there is only one network card.
-
I can ping 192.168.0.1 from the server and i can ping 192.168.2.1 from my normal computer.
But i cant ping either client (192.168.0.2 and 192.168.2.2)
-
Can the computers get to the Internet? What is their default gateway?
-
Both the computers can connect to the internet.
Gateway is 192.168.0.1 for the LAN and 192.168.2.1 for the server
-
What happends if i put the BOLD rules first? Will there be any difference
Server side
* * * * * *
*** Serv net * LAN net * ***Lan side
* * * * * *
*** LAN net * Serv net * * **Edit: Nothing at all happend.. Did a Reset State to..
-
Can you provide a network diagram? Are you running pfSense 1.2?
Have you changed any of the default settings, like disabling the automatic Outbound NAT?
-
@Cry:
Can you provide a network diagram? Are you running pfSense 1.2?
Have you changed any of the default settings, like disabling the automatic Outbound NAT?
I can´t provide a network diagram at the moment. (I´m at work)
Yepp, i´m running pfsense 1.2. Nope, i havent change any of the default settings.
Edit: Done a diagram now..
-
Any one?