Ive got a problem! Cant access Server network from Lan network

Pertan

HI there..

I got a bit of a problem.

I have one lan network and one Server network.

Lan network is on 192.168.0.0/24 and server network is on 192.168.1.0/24. Both is able to connect to the internet but not to each other. I cant ping my normal computer from the server and vise versa.

LAN interface (fxp0)
Status 	up
MAC address 	00:08:c7:f3:1c:c8
IP address 	192.168.0.1  
Subnet mask 	255.255.255.0
Media 	100baseTX <full-duplex>In/out packets 	5315/7076 (898 KB/6.07 MB)
In/out errors 	0/0
Collisions 	0</full-duplex>

Serv interface (fxp2)
Status 	up
MAC address 	00:50:8b:ac:52:1e
IP address 	192.168.2.1  
Subnet mask 	255.255.255.0
Media 	100baseTX <full-duplex>In/out packets 	0/0 (0 bytes/32 KB)
In/out errors 	0/0
Collisions 	0</full-duplex>

and the rules

Server side


*  	 *  	 *  	 *  	 *  	 *  	   
*  	 Serv net  	 *  	 LAN net  	 *  	 *

Lan side


*  	 *  	 *  	 *  	 *  	 *  	    	  
*  	 LAN net  	 *  	 Serv net  	 *  	 *

What shall i do to solv this problem? I have just done a fresh install.

Perry

Recheck every clients used and unused network card setting, maybe a wrong gateway or could it be a client firewall

Pertan

I have deactivated both Windows Vistas firewall and Windows 2003 firewall.

In the normal/server computer there is only one network card.

Pertan

I can ping 192.168.0.1 from the server and i can ping 192.168.2.1 from my normal computer.

But i cant ping either client (192.168.0.2 and 192.168.2.2)

cmb

Can the computers get to the Internet? What is their default gateway?

Pertan

Both the computers can connect to the internet.

Gateway is 192.168.0.1 for the LAN and 192.168.2.1 for the server

Pertan

What happends if i put the BOLD rules first? Will there be any difference

Server side

* * * * * *
*** Serv net * LAN net * ***

Lan side

* * * * * *
*** LAN net * Serv net * * **

Edit: Nothing at all happend.. Did a Reset State to..

Cry Havok

Can you provide a network diagram? Are you running pfSense 1.2?

Have you changed any of the default settings, like disabling the automatic Outbound NAT?

Pertan

@Cry:

Can you provide a network diagram? Are you running pfSense 1.2?

Have you changed any of the default settings, like disabling the automatic Outbound NAT?

I can´t provide a network diagram at the moment. (I´m at work)

Yepp, i´m running pfsense 1.2. Nope, i havent change any of the default settings.

Edit: Done a diagram now..

Drawing1.png_thumb

Pertan

Any one?