1.2 Beta WAN "Port bouncing" / random disconnects - DUAL WAN
-
@cmb:
Is there anything in the logs when this happens?
Nothing super useful from where I'm sitting ( re2 down/up notices, and subsequent removing/adding into the pool). This unfortunately makes the system practically unusable as it fails the routes in and out. I'd love to be in 1.2 so I can use the "sticky connections" (session affinity I guess?) - other than that, pfSense 1.0.1 has been working like a dream.
Sam
-
Could you post the exact system logs you're seeing? This sounds like a regression between FreeBSD 6.1 and 6.2. I'd like to look and see if it's a known issue, and the exact logs will help me Google. :)
-
I just re-upgraded to the latest snapshot from 1.0.1; as soon as it starts happening again I'll grab the logs. Is there any other info regarding the hardware platform or something else that might be useful?
Sam
-
One other thing - the entire contents from dmesg on status.php.
-
DMESG Copyright (c) 1992-2007 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 6.2-RELEASE-p5 #0: Mon May 28 21:51:22 EDT 2007 sullrich@builder6.pfsense.com:/usr/obj.pfSense/usr/src/sys/pfSense.6 Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: VIA C7 Esther+RNG+AES+AES-CTR+SHA1+SHA256+RSA (1000.01-MHz 686-class CPU) Origin = "CentaurHauls" Id = 0x6a9 Stepping = 9 Features=0xa7c9baff <fpu,vme,de,pse,tsc,msr,pae,mce,apic,sep,mtrr,pge,cmov,pat,clflush,acpi,mmx,fxsr,sse,sse2,tm,pbe>Features2=0x181 <sse3,est,tm2>real memory = 1005453312 (958 MB) avail memory = 974585856 (929 MB) ACPI APIC Table: <cn700 awrdacpi="">ioapic0 <version 0.3="">irqs 0-23 on motherboard wlan: mac acl policy registered kbd1 at kbdmux0 ath_hal: 0.9.17.2 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413) acpi0: <cn700 awrdacpi="">on motherboard acpi0: Power Button (fixed) can't fetch resources for \\_SB_.PCI0.UAR1 - AE_BAD_DATA can't fetch resources for \\_SB_.PCI0.UAR2 - AE_BAD_DATA Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 cpu0: <acpi cpu="">on acpi0 acpi_perf0: <acpi cpu="" frequency="" control="">on cpu0 acpi_throttle0: <acpi cpu="" throttling="">on cpu0 acpi_button0: <power button="">on acpi0 pcib0: <acpi host-pci="" bridge="">port 0xcf8-0xcff on acpi0 pci0: <acpi pci="" bus="">on pcib0 pcib1: <pci-pci bridge="">at device 1.0 on pci0 pci1: <pci bus="">on pcib1 pci1: <display, vga="">at device 0.0 (no driver attached) re0: <realtek 8169sc="" 8110sc="" single-chip="" gigabit="" ethernet="">port 0xf200-0xf2ff mem 0xfdfff000-0xfdfff0ff irq 18 at device 9.0 on pci0 miibus0: <mii bus="">on re0 rgephy0: <rtl8169s 8110s="" media="" interface="">on miibus0 rgephy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX-FDX, auto re0: Ethernet address: 00:30:18:a6:2a:ee re0: [FAST] fwohci0: <via fire="" ii="" (vt6306)="">port 0xff00-0xff7f mem 0xfdffe000-0xfdffe7ff irq 19 at device 10.0 on pci0 fwohci0: OHCI version 1.10 (ROM=1) fwohci0: No. of Isochronous channels is 4. fwohci0: EUI64 00:30:18:00:00:ab:92:cd fwohci0: Phy 1394a available S400, 2 ports. fwohci0: Link S400, max_rec 2048 bytes. firewire0: <ieee1394(firewire) bus="">on fwohci0 sbp0: <sbp-2 scsi="" over="" firewire="">on firewire0 fwohci0: Initiate bus reset fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me) firewire0: bus manager 0 (me) re1: <realtek 8169sc="" 8110sc="" single-chip="" gigabit="" ethernet="">port 0xf000-0xf0ff mem 0xfdffd000-0xfdffd0ff irq 19 at device 11.0 on pci0 miibus1: <mii bus="">on re1 rgephy1: <rtl8169s 8110s="" media="" interface="">on miibus1 rgephy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX-FDX, auto re1: Ethernet address: 00:30:18:a6:2a:ef re1: [FAST] re2: <realtek 8169sc="" 8110sc="" single-chip="" gigabit="" ethernet="">port 0xec00-0xecff mem 0xfdffc000-0xfdffc0ff irq 16 at device 12.0 on pci0 miibus2: <mii bus="">on re2 rgephy2: <rtl8169s 8110s="" media="" interface="">on miibus2 rgephy2: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX-FDX, auto re2: Ethernet address: 00:30:18:a6:2a:f0 re2: [FAST] atapci0: <via 6420="" sata150="" controller="">port 0xfe00-0xfe07,0xfd00-0xfd03,0xfc00-0xfc07,0xfb00-0xfb03,0xfa00-0xfa0f,0xee00-0xeeff irq 20 at device 15.0 on pci0 ata2: <ata 0="" channel="">on atapci0 ata3: <ata 1="" channel="">on atapci0 atapci1: <via 8237="" udma133="" controller="">port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xf900-0xf90f at device 15.1 on pci0 ata0: <ata 0="" channel="">on atapci1 ata1: <ata 1="" channel="">on atapci1 uhci0: <via 83c572="" usb="" controller="">port 0xf800-0xf81f irq 21 at device 16.0 on pci0 uhci0: [GIANT-LOCKED] usb0: <via 83c572="" usb="" controller="">on uhci0 usb0: USB revision 1.0 uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhci1: <via 83c572="" usb="" controller="">port 0xf700-0xf71f irq 21 at device 16.1 on pci0 uhci1: [GIANT-LOCKED] usb1: <via 83c572="" usb="" controller="">on uhci1 usb1: USB revision 1.0 uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered uhci2: <via 83c572="" usb="" controller="">port 0xf600-0xf61f irq 21 at device 16.2 on pci0 uhci2: [GIANT-LOCKED] usb2: <via 83c572="" usb="" controller="">on uhci2 usb2: USB revision 1.0 uhub2: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered uhci3: <via 83c572="" usb="" controller="">port 0xf500-0xf51f irq 21 at device 16.3 on pci0 uhci3: [GIANT-LOCKED] usb3: <via 83c572="" usb="" controller="">on uhci3 usb3: USB revision 1.0 uhub3: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub3: 2 ports with 2 removable, self powered ehci0: <via vt6202="" usb="" 2.0="" controller="">mem 0xfdffb000-0xfdffb0ff irq 21 at device 16.4 on pci0 ehci0: [GIANT-LOCKED] usb4: waiting for BIOS to give up control usb4: timed out waiting for BIOS usb4: EHCI version 1.0 usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3 usb4: <via vt6202="" usb="" 2.0="" controller="">on ehci0 usb4: USB revision 2.0 uhub4: VIA EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 uhub4: 8 ports with 8 removable, self powered isab0: <pci-isa bridge="">at device 17.0 on pci0 isa0: <isa bus="">on isab0 pci0: <multimedia, audio="">at device 17.5 (no driver attached) vr0: <via 10="" vt6102="" rhine="" ii="" 100basetx="">port 0xe800-0xe8ff mem 0xfdffa000-0xfdffa0ff irq 23 at device 18.0 on pci0 miibus3: <mii bus="">on vr0 ukphy0: <generic ieee="" 802.3u="" media="" interface="">on miibus3 ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto vr0: Ethernet address: 00:30:18:b0:59:75 acpi_tz0: <thermal zone="">on acpi0 speaker0: <pc speaker="">port 0x61 on acpi0 fdc0: <floppy drive="" controller="">port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0 fdc0: [FAST] ppc0: <standard parallel="" printer="" port="">port 0x378-0x37f irq 7 on acpi0 ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode ppbus0: <parallel port="" bus="">on ppc0 lpt0: <printer>on ppbus0 lpt0: Interrupt-driven port ppi0: <parallel i="" o="">on ppbus0 pmtimer0 on isa0 atkbdc0: <keyboard controller="" (i8042)="">at port 0x60,0x64 on isa0 atkbd0: <at keyboard="">irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] sc0: <system console="">at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio0: configured irq 4 not in bitmap of probed irqs 0 sio0: port may not be enabled sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio1 at port 0x2f8-0x2ff irq 3 on isa0 sio1: type 16550A vga0: <generic isa="" vga="">at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 uhid0: ITUNER INC USB-LCD-20x2, rev 2.00/0.01, addr 2, iclass 3/0 Timecounter "TSC" frequency 1000007517 Hz quality 800 Timecounters tick every 1.000 msec Fast IPsec: Initialized Security Association Processing. ad2: 1953MB <sandisk sdcfx-2048="" hdx="" 3.22="">at ata1-master PIO4 Trying to mount root from ufs:/dev/ad2s1a ___ ___/ f \\ / p \\___/ Sense \\___/ \\ \\___/ Welcome to pfSense 1.2-BETA-1-TESTING-SNAPSHOT-05-27-2007 on the 'pfSense' platform... Mounting filesystems... done. Creating symlinks... . . . done. Launching PHP init system... done. Initializing... . . . . . . . . . . . . . . . done. Starting device manager (devd)... done. Loading configuration... . . . done. Updating configuration... done. Cleaning backup cache... done. Setting up extended sysctls... done. Syncing user passwords... done. Starting Secure Shell Services... done. Setting timezone... done. Starting syslog... done. Configuring LAN interface... re0: link state changed to DOWN re1: link state changed to UP re2: link state changed to UP vr0: link state changed to UP done. Configuring WAN interface... re2: link state changed to DOWN re2: link state changed to UP re2: link state changed to DOWN re2: link state changed to UP re2: link state changed to DOWN done. Configuring OPT interfaces... re1: link state changed to DOWN done. Configuring CARP interfaces... done. Syncing system time before startup... re2: link state changed to UP re1: link state changed to UP done. pflog0: promiscuous mode enabled arplookup 10.31.9.1 failed: host is not on local network Configuring firewall... . . . done. Starting webConfigurator... done. Starting DHCP service... done. Configuring PPTP VPN service... done Setting up microcode and tx/rx offloading... done. Starting FTP helpers... done. Generating RRD graphs... done. Starting DHCP service... done. Starting OpenNTP time client... done. Starting CRON... done. Syncing packages: . Executing rc.d items... Starting /usr/local/etc/rc.d/miniupnpd.sh... done. appending output to nohup.out Bootup complete arplookup 10.31.9.1 failed: host is not on local network arplookup 10.31.9.1 failed: host is not on local network arplookup 10.31.9.1 failed: host is not on local network</sandisk></generic></system></at></keyboard></parallel></printer></parallel></standard></floppy></pc></thermal></generic></mii></via></multimedia,></isa></pci-isa></via></via></via></via></via></via></via></via></via></via></ata></ata></via></ata></ata></via></rtl8169s></mii></realtek></rtl8169s></mii></realtek></sbp-2></ieee1394(firewire)></via></rtl8169s></mii></realtek></display,></pci></pci-pci></acpi></acpi></power></acpi></acpi></acpi></cn700></version></cn700 ></sse3,est,tm2></fpu,vme,de,pse,tsc,msr,pae,mce,apic,sep,mtrr,pge,cmov,pat,clflush,acpi,mmx,fxsr,sse,sse2,tm,pbe>arplookup 10.31.9.1 failed: host is not on local network repeats another hundred times or so - but that's a function of the way Time Warner NYC sets up their RoadRunner service I believe.
-
Almost on command…
May 29 23:22:47 dhclient[7327]: DHCPREQUEST on re2 to 255.255.255.255 port 67 May 29 23:22:47 kernel: re2: link state changed to DOWN May 29 23:22:47 kernel: re2: link state changed to UP May 29 23:22:45 kernel: re2: link state changed to DOWN May 29 23:22:45 dhclient[7205]: exiting. May 29 23:22:45 dhclient[7205]: exiting. May 29 23:22:45 dhclient[7205]: short write: wanted 20 got 0 bytes May 29 23:22:45 dhclient[7205]: short write: wanted 20 got 0 bytes May 29 23:22:44 slbd[6543]: Service balance changed status, reloading filter policy May 29 23:22:44 slbd[6543]: Service wan2 changed status, reloading filter policy May 29 23:22:44 slbd[6543]: Service wan1 changed status, reloading filter policy May 29 23:22:44 last message repeated 2 times May 29 23:22:44 slbd[6543]: ICMP poll succeeded for 69.9.160.XXX, marking service UP May 29 23:22:44 kernel: re2: link state changed to UP May 29 23:22:42 php: : HOTPLUG: Configuring wan interface May 29 23:22:42 php: : Processing - May 29 23:22:42 php: : Hotplug event detected for start but ignoring since interface is not set for DHCP May 29 23:22:42 php: : Processing start - May 29 23:22:42 kernel: re2: link state changed to DOWN May 29 23:22:41 dhcpd: For info, please visit http://www.isc.org/sw/dhcp/ May 29 23:22:41 dhcpd: All rights reserved. May 29 23:22:41 dhcpd: Copyright 2004-2006 Internet Systems Consortium. May 29 23:22:41 dhcpd: Internet Systems Consortium DHCP Server V3.0.5 May 29 23:22:40 kernel: re2: link state changed to UP May 29 23:22:37 dhclient[7131]: bound to 66.234.57.XXX-- renewal in 39280 seconds. May 29 23:22:37 kernel: re2: link state changed to DOWN May 29 23:22:37 dhclient[7131]: DHCPACK from 10.35.128.1 May 29 23:22:37 kernel: re2: link state changed to UP May 29 23:22:36 kernel: arpresolve: can't allocate route for 66.234.57.XXX May 29 23:22:36 kernel: arpresolve: can't allocate route for 66.234.57.XXX May 29 23:22:35 dhclient[7131]: DHCPREQUEST on re2 to 255.255.255.255 port 67 May 29 23:22:35 kernel: re2: link state changed to DOWN May 29 23:22:35 kernel: re2: link state changed to UP May 29 23:22:33 slbd[6543]: Service balance changed status, reloading filter policy May 29 23:22:33 slbd[6543]: Service wan1 changed status, reloading filter policy May 29 23:22:33 slbd[6543]: ICMP poll failed for 69.9.160.XXX, marking service DOWN May 29 23:22:33 slbd[6543]: ICMP poll failed for 69.9.160.XXX, marking service DOWN May 29 23:22:33 slbd[6543]: Service wan2 changed status, reloading filter policy May 29 23:22:33 slbd[6543]: ICMP poll failed for 69.9.160.XXX, marking service DOWN May 29 23:22:33 kernel: re2: link state changed to DOWN -
For what it's worth - restarting pfsense seems to fix it for another 18-24 hours; restarting the cable modem (re2) has no effect. Also, before you ask, the host it's monitoring with ICMP is online :)
Sam
-
any other data or info I can provide? I tried the whole googling / forum search with no real success. I'm also not really familiar with freebsd outside of having used pfsense though :)
-
I am seeing this same behavior. I am running:
"1.2-RELEASE built on Sun Feb 24 17:04:58 EST 2008" on a test box with no traffic passing (no DUAL WAN). The common thread here seems to be the network cards. I am using an onboard Intel PRO100/VE(kernel: fxp0: <intel 100="" 82801ba="" cam="" (ich2="" 3)="" pro="" ethernet="">) and 3 netgear ga311 (kernel: re0: <realtek 8169s="" single-chip="" gigabit="" ethernet="">). All the links start to bounce after an undetermined time has passed. A reboot resolves the issue for a short time. I have tried 2 switches (HP Procurve and a Linksys) and it doesn't resolve it. I am waiting for it to start bouncing again to post the logs but it seems to happen every 3 seconds once it starts.Thanks</realtek></intel>
-
Jul 7 22:21:46 SnortStartup[14218]: Ram free BEFORE starting Snort: 34M – Ram free AFTER starting Snort: 34M -- Mode lowmem -- Snort memory usage:
Jul 7 22:22:40 kernel: re0: promiscuous mode enabled
Jul 7 22:22:40 kernel: re0: link state changed to DOWN
Jul 7 22:22:40 kernel: re0: promiscuous mode disabled
Jul 7 22:22:42 kernel: re0: promiscuous mode enabled
Jul 7 22:22:44 kernel: re0: link state changed to UP
Jul 7 22:22:47 check_reload_status: rc.linkup starting
Jul 7 22:22:48 php: : Processing re0 - start
Jul 7 22:22:48 php: : DEVD Ethernet attached event for re0
Jul 7 22:22:48 kernel: re0: link state changed to DOWN
Jul 7 22:22:48 php: : HOTPLUG: Configuring wan interface re0
Jul 7 22:22:48 dhclient[251]: connection closed
Jul 7 22:22:48 dhclient[251]: connection closed
Jul 7 22:22:48 dhclient[251]: exiting.
Jul 7 22:22:48 dhclient[251]: exiting.
Jul 7 22:22:50 kernel: re0: link state changed to UP
Jul 7 22:22:51 kernel: re0: link state changed to DOWN
Jul 7 22:22:53 kernel: re0: link state changed to UP
Jul 7 22:22:54 kernel: re0: link state changed to DOWN
Jul 7 22:22:54 dhclient[14431]: DHCPREQUEST on re0 to 255.255.255.255 port 67
Jul 7 22:22:55 kernel: re0: link state changed to UP
Jul 7 22:22:57 last message repeated 2 times
Jul 7 22:22:57 dhclient[14431]: DHCPACK from 192.168.10.3
Jul 7 22:22:57 dhclient[14431]: Bogus domain search list 15: hope_domain.local (hope_domain.local)
Jul 7 22:22:57 dhclient[14431]: Bogus domain search list 15: hope_domain.local (hope_domain.local)
Jul 7 22:22:58 kernel: re0: link state changed to DOWN
Jul 7 22:22:58 dhclient[14431]: bound to 192.168.10.204 – renewal in 28800 seconds.
Jul 7 22:22:59 kernel: re0: link state changed to UP
Jul 7 22:23:00 dnsmasq[501]: reading /etc/resolv.conf
Jul 7 22:23:00 dnsmasq[501]: using nameserver 192.168.1.3#53
Jul 7 22:23:00 dnsmasq[501]: using nameserver 192.168.10.3#53
Jul 7 22:23:00 dnsmasq[501]: exiting on receipt of SIGTERM
Jul 7 22:23:01 dnsmasq[14519]: started, version 2.39 cachesize 150
Jul 7 22:23:01 dnsmasq[14519]: compile time options: IPv6 GNU-getopt ISC-leasefile no-DBus no-I18N TFTP
Jul 7 22:23:01 dnsmasq[14519]: reading /etc/resolv.conf
Jul 7 22:23:01 dnsmasq[14519]: using nameserver 192.168.1.3#53
Jul 7 22:23:01 dnsmasq[14519]: using nameserver 192.168.10.3#53
Jul 7 22:23:01 dnsmasq[14519]: read /etc/hosts - 2 addresses
Jul 7 22:23:01 kernel: re0: link state changed to DOWN
Jul 7 22:23:01 php: : Processing start -
Jul 7 22:23:01 php: : Not a valid interface action ""
Jul 7 22:23:01 php: : Processing -
Jul 7 22:23:01 php: : Not a valid interface action ""
Jul 7 22:23:01 check_reload_status: rc.newwanip starting
Jul 7 22:23:02 php: : Informational: rc.newwanip is starting re0.
Jul 7 22:23:02 php: : rc.newwanip working with (IP address: 192.168.10.204) (interface: wan) (interface real: re0).
Jul 7 22:23:03 kernel: re0: link state changed to UP
Jul 7 22:23:07 php: : Informational: DHClient spawned /etc/rc.newwanip and the new ip is wan - 192.168.10.204.
Jul 7 22:23:07 php: : Creating rrd update script
Jul 7 22:23:07 php: : Configuring slbd
Jul 7 22:23:07 check_reload_status: reloading filter
Jul 7 22:23:09 check_reload_status: updating dyndns
Jul 7 22:23:15 check_reload_status: rc.linkup starting
Jul 7 22:23:16 php: : Processing re0 - start
Jul 7 22:23:16 php: : DEVD Ethernet attached event for re0
Jul 7 22:23:16 kernel: re0: link state changed to DOWN
Jul 7 22:23:16 php: : HOTPLUG: Configuring wan interface re0
Jul 7 22:23:19 kernel: re0: link state changed to UP
Jul 7 22:23:19 dhclient[14489]: short write: wanted 20 got 0 bytes
Jul 7 22:23:19 dhclient[14489]: short write: wanted 20 got 0 bytes
Jul 7 22:23:19 dhclient[14489]: exiting.
Jul 7 22:23:19 dhclient[14489]: exiting.
Jul 7 22:23:19 kernel: re0: link state changed to DOWN
Jul 7 22:23:21 kernel: re0: link state changed to UP
Jul 7 22:23:22 kernel: re0: link state changed to DOWN
Jul 7 22:23:22 dhclient[14902]: DHCPREQUEST on re0 to 255.255.255.255 port 67
Jul 7 22:23:24 kernel: re0: link state changed to UP
Jul 7 22:23:27 last message repeated 2 times
Jul 7 22:23:32 dhclient[14902]: DHCPDISCOVER on re0 to 255.255.255.255 port 67 interval 2
Jul 7 22:23:32 dhclient[14902]: DHCPOFFER from 192.168.10.3
Jul 7 22:23:32 dhclient[14902]: Bogus domain search list 15: hope_domain.local (hope_domain.local)
Jul 7 22:23:32 dhclient[14902]: Bogus domain search list 15: hope_domain.local (hope_domain.local)
Jul 7 22:23:32 dhclient[14902]: DHCPOFFER from 192.168.10.1
Jul 7 22:23:34 dhclient[14902]: DHCPREQUEST on re0 to 255.255.255.255 port 67
Jul 7 22:23:34 dhclient[14902]: DHCPACK from 192.168.10.3
Jul 7 22:23:34 dhclient[14902]: Bogus domain search list 15: hope_domain.local (hope_domain.local)
Jul 7 22:23:34 dhclient[14902]: Bogus domain search list 15: hope_domain.local (hope_domain.local)
Jul 7 22:23:34 kernel: re0: link state changed to DOWN
Jul 7 22:23:34 dhclient[14902]: bound to 192.168.10.204 – renewal in 28800 seconds.
Jul 7 22:23:36 kernel: re0: link state changed to UP
Jul 7 22:23:36 dnsmasq[14519]: reading /etc/resolv.conf
Jul 7 22:23:36 dnsmasq[14519]: using nameserver 192.168.1.3#53
Jul 7 22:23:36 dnsmasq[14519]: using nameserver 192.168.10.3#53
Jul 7 22:23:36 dnsmasq[14519]: exiting on receipt of SIGTERM
Jul 7 22:23:37 dnsmasq[15017]: started, version 2.39 cachesize 150
Jul 7 22:23:37 dnsmasq[15017]: compile time options: IPv6 GNU-getopt ISC-leasefile no-DBus no-I18N TFTP
Jul 7 22:23:37 dnsmasq[15017]: reading /etc/resolv.conf
Jul 7 22:23:37 dnsmasq[15017]: using nameserver 192.168.1.3#53
Jul 7 22:23:37 dnsmasq[15017]: using nameserver 192.168.10.3#53
Jul 7 22:23:37 dnsmasq[15017]: read /etc/hosts - 2 addresses
Jul 7 22:23:38 kernel: re0: link state changed to DOWN
Jul 7 22:23:38 php: : Processing start -
Jul 7 22:23:38 php: : Not a valid interface action ""
Jul 7 22:23:38 php: : Processing -
Jul 7 22:23:38 php: : Not a valid interface action ""
Jul 7 22:23:38 check_reload_status: rc.newwanip starting
Jul 7 22:23:38 php: : Informational: rc.newwanip is starting re0.
Jul 7 22:23:38 php: : rc.newwanip working with (IP address: 192.168.10.204) (interface: wan) (interface real: re0).
Jul 7 22:23:41 kernel: re0: link state changed to UP -
Sorry to make all these separate posts but I think I found the cause:
fxp0: promiscuous mode disabled
fxp0: promiscuous mode enabled
fxp0: promiscuous mode disabled
pflog0: promiscuous mode disabled
pflog0: promiscuous mode enabled
re0: promiscuous mode enabled
re0: link state changed to DOWN
re0: promiscuous mode disabled
re0: promiscuous mode enabled
re0: link state changed to UP
re0: link state changed to DOWN
re0: link state changed to UP
re0: link state changed to DOWN
re0: link state changed to UP
re0: link state changed to DOWN
re0: link state changed to UP
re0: link state changed to DOWN
re0: link state changed to UP
re0: link state changed to DOWN
re0: link state changed to UP
re0: link state changed to DOWN
re0: link state changed to UPAs soon as the re0 goes promiscuous it blows up. I see the same from the above log. That is the RealTek 8169S Single-chip Gigabit Ethernet Netgear card. Any thoughts as to where I go?
-
This is beginning to feel like more of a blog then a forum but in case this helps others:
I removed the Realtek 8169s based netgear ga311 nics from the system and replaced them with a single 3com 3c905tx. I reconfigured and retested promiscous mode with darkstat and the 3com and everything is working now. There appears to be something with the re driver and my setup which is an older micron P4 1.4 ghz tower. I tried disabling ACPI but it had no effect. Goodluck,
Paul -
I'm probably not the only one saying this but imo realtek nics are junk and should not be used in firewall/server systems. Intel nics are recommended with pfSense and for a good reason too.
-
Thanks for the feedback. This is just a test box using what I had on hand. I prefer intel nics but I would be hard-pressed to fault the realteks in this case. I think they should be removed from the HCL. Simply enabling promiscuous mode shouldn't cause a meltdown like this. I looks like a freebsd driver issue though and not a pfsense specific issue as far as I can tell. I just feel bad for anyone using an onboard 8169 in a small form factor setup.
Paul