Updating to 1.2.1
-
Starting with a fresh install… dhcp service will not start.
Next question...
Is this the kind of reports you guys want?? ;D
07/05/08 21:16 snapshot
-
If you encounter a defect, any additional information you can provide (like logs or output from trying to run the dhcp server manually) will be very helpful. As much information as you can provide to help identify the cause of the defect so that the developers can quickly address the issue.
-
I did attempt to start the dhcp server with the gui with no luck. Says it started but still showed the X. And no service was present.
-
Verified and resolved. Please try the next snapshot (building now).
-
Using
1.2.1-TESTING-SNAPSHOT
built on Tue Jul 8 07:24:59 EDT 2008Same issue. No DHCP server.
Just noticed also it the system doesnt seem to use the dns provided to it by my hardware routers dhcp service for its own needs. I had to fill in the dns servers on System/General Setup. Before that the package page wouldn't populate and the time client couldnt get to any server I gave it to look at. Ill go to my modem direct tomorrow and test.
-
Jul 8 01:34:23 dhcpd: For info, please visit http://www.isc.org/sw/dhcp/
Jul 8 01:34:23 dhcpd: Wrote 0 leases to leases file.
Jul 8 01:34:23 dhcpd: No bpf devices. Please read the README section for your operating system.From my logs
-
I can confirm this it does look like DHCP is broken again after the earlier fix that did appear to work.
Just tried - pfSense-Full-Update-1.2.1-TESTING-SNAPSHOT-20080708-0725.tgz (08-Jul-2008 04:02 - 38M)
-
I can confirm this it does look like DHCP is broken again after the earlier fix that did appear to work.
Just tried - pfSense-Full-Update-1.2.1-TESTING-SNAPSHOT-20080708-0725.tgz (08-Jul-2008 04:02 - 38M)
Same snapshot…I can confirm the same problem...also with the earlier pfSense-Full-Update-1.2.1-TESTING-SNAPSHOT-20080708-0410.tgz as well.
I have an earlier snapshot running somewhere else, and it seems to be working there, I not in front of it so I can't get the build date presently...
Everything else seems great though! :D
-
It was working on;
pfSense-Full-Update-1.2.1-TESTING-SNAPSHOT-20080708-0032.tgz (07-Jul-2008 21:10 - 38M)
but then got broke again when the loadbalance got fixed IMHO.
-
Fixed. Try next snap
-
Just noticed also it the system doesnt seem to use the dns provided to it by my hardware routers dhcp service for its own needs. I had to fill in the dns servers on System/General Setup. Before that the package page wouldn't populate and the time client couldnt get to any server I gave it to look at. Ill go to my modem direct tomorrow and test.
Ive put my system back in place heading up my network against the modem. Still seems that I need to have dns servers listed on the General Setup page and that my ISP's DHCP assigned servers are not automatically used. Not a problem here but seems different from the 1.2R. I can test more but was wondering if anyone else was seeing this, or if its expected behavior?
Great Job to the dev's by the way!
-
GUI issue
System/Firmware/Updater Settings
Window offset using Firefox 3.0.1
-
Fixed, please try next snap.
-
System Logs in the GUI seem to have stopped.
1.2.1-TESTING-SNAPSHOT
built on Thu Jul 10 00:10:45 EDT 2008This has happened to me before and they began to work after a reboot. I will pay attention to what Im doing to possibly cause this.
I dont get " syslogd: kernel boot file is /boot/kernel/kernel " after clearing logs when this happens…
-
Ive put my system back in place heading up my network against the modem. Still seems that I need to have dns servers listed on the General Setup page and that my ISP's DHCP assigned servers are not automatically used. Not a problem here but seems different from the 1.2R. I can test more but was wondering if anyone else was seeing this, or if its expected behavior?
I cant blank out the "dns Server" lines on the general setup page and reproduce this.
I will have to reinstall from cd later to see if I can duplicate it… I believe it only happens after a fresh install. -
Scratch that…
Im not using "dns forwarder" (while disabled it still seems to load on boot up though)
Im using DHCP
I blanked the DNS servers lines on the General Setup page.
As clients began to renew they were not given a dns server.
Rebooted about an hour or a little more ago.
Generally I assign my clients a static address via DHCP. These two that were affected were not set up for this yet.
-
System Logs in the GUI seem to have stopped.
Just noticed this again plus cpu just held at 100%
Reboot and back to normal.
-
run top from command prompt and report back the top offenders
-
You mean if it goes to 100% again?
Mine normally runs at 1-3% normally…
This is RRD Graph from a few minutes ago.
-
Im not using "dns forwarder" (while disabled it still seems to load on boot up though)
It shows it's going through that part whether or not it's enabled, it doesn't start it if it isn't enabled.
Im using DHCP
I blanked the DNS servers lines on the General Setup page.
As clients began to renew they were not given a dns server.
This is different from 1.2 release? I believe this is expected behavior, if you don't enable the DNS forwarder and don't configure your own DNS servers, clients don't get DNS servers assigned. If you want them to use your ISP's DNS servers I would recommend turning on the DNS forwarder. No reason not to, it's silly to not run a caching DNS server on your network when it's readily available. Why add Internet DNS resolution delay when you don't have to?
