Alix 2c3 fatal trap
-
The vr(4) driver was back ported from FreeBSD RELENG_7, guessing that's related to this. We'll check into it.
-
thanks for looking into this. Let me know if you need aditional info/symptoms.
-
Try disabling acpi and report back if it makes any difference.
I do not know if the ALix2c3 has any MSI features in it but if you can check there might be even a msi disabling test that would be interesting.
Ermal
-
I'm running the 1.3AA on a 2c3 and it has not rebooted unexpectedly. I have LAN on vr0 and WAN on vr1.
Connected a laptop to LAN and plugged WAN into my network (dhcp) and browsed the Internet, downloaded files through the box. I then switched the LAN to my private network to play with the AD auth in the usermanager leaving it running all day- no stability issues so far. -
Disabled ACPI at boot, but no luck, it still reboots. dotdash what kind of CF card are you using?, I will try with different CF card, is pfsense sensitive with different cards? I'm currently using Sandisk extreme II 2Gb card.
-
Use a debugging enabled kernel and post the output of the "bt" command on the debugger prompt.
-
Hi ermal,
Is there by any chance embeded image with debugging kernel available? I'm not really an expert with this stuff. I found some info here:
http://devwiki.pfsense.org/ObtainingPanicInfoForDeveloperstnx for your help.
Regards,
-
Check under /kernels there usually you will find different kernels. Not sure if embedded has those too.
-
dotdash what kind of CF card are you using?, I will try with different CF card, is pfsense sensitive with different cards? I'm currently using Sandisk extreme II 2Gb card.
My test box has a 1 GB Kingston. I've got 1.2 production boxes with A-Data, Lexar, Kingston cards. I've never had a problem writing an image to a card.
-
I think he has a hardware problems but better check ;)