Dashboard does not save settings

yoda715

Hmm. Ok, I'm not seeing the same results, but I'm looking into it.

mrzaz

Tried the latest again "ALPHA-20080722-1722.tgz" but same.

Just to be sure that it isn't any old cached data running I cleared the Cache in FF and IE
and closed down the browsers and started fresh. But as said, same problem.

I also noticed in IE, the following exceptions:
1_login.jpg

This comes straight after you have logged in and done nothing.

2_mousecursor_over__blank_Dashboard.jpg

This comes continously when the cursor is hovering the dashboard. Once every few seconds

3_select_widget_carp.jpg

This comes when you press the PLUS and selects a widget to show on dashboard (in this case the CARP)

//Dan Lundqvist

1_login.jpg_thumb

2_mousecursor_over__blank_Dashboard.jpg_thumb

3_select_widget_carp.jpg_thumb

yoda715

Ok I'm not able to duplicate this. Can you post the widget config entry in your config.xml? To view the config entry, go to Diagnostics > Edit File. Enter "/conf/config.xml" in the "Save/load" text box and click 'Load'. Now look for the section like this:

Can you post this information to this thread? (include the <widget>tags)</widget>

oswazi

Here is my config.xml, at the bottom widgets doesn't show anything.

<pfsense><version>4.8</version>
…........................

<shaper></shaper></pfsense>

yoda715

Ahh, thats a problem. It should never be blank. Remove

and save the config, then reboot. Tell me how that looks.

oswazi

I am running off of Monday July21st snapshot, should i upgrade first to latest and then do as suggested? or try as is?

yoda715

I'm committing a data check for this issue. You can either remove the config entries or wait for the next snapshot to be built. Either way will restore the dashboard. Thanks for your assistance!

mrzaz

Mine was:

Thumbs up! I removed the section and rebooted and now it seems to work.
Got SystemInfo, Interfaces and Traffic Graphs as default when logging in
and was able to add additional and drag them around and place them where
I wanted...

If you have included a sanity check for this I have no problem to close
this topic. Case closed... :-)

Best regards
Dan Lundqvist

Ps. Thanks for quick response on this one ... :D
And thanks for a VERY good piece of software...

mrzaz

Have double-checked that the widget data is stored correctly in config = YES.

<widgets><sequence>system_information-container:col1:show,interfaces-container:col1:show,carp_status-container:col1:close,gateways-container:col1:close,installed_packages-container:col1:close,interface_statistics-container:col2:close,load_balancer_status-container:col2:close,log-container:col2:close,services_status-container:col2:close,cpu_graphs-container:col2:show,traffic_graphs-container:col2:show,ipsec-container:col2:show</sequence></widgets>

yoda715

Good to hear, thanks for helping troubleshoot :)

Perry

Hmm mine gets overridden with the default setting everytime I logon. Did a pfSense reinstall with pfSense-Full-Update-1.3-ALPHA-ALPHA-20080723-0948.tgz
what i did (config.xml):


After Logon
-------------------
	 <widgets><traffic_graphs-config>LAN_graph-config:show,WAN_graph-config:show,refreshInterval=1</traffic_graphs-config></widgets> 
-----------------------------------
After adding widgets and saving
----------------------------------------
	 <widgets><sequence>system_information-container:col1:show,carp_status-container:col1:close,cpu_graphs-container:col1:close,gateways-container:col1:close,interface_statistics-container:col2:show,installed_packages-container:col2:show,interfaces-container:col2:show,ipsec-container:col2:close,load_balancer_status-container:col2:close,log-container:col2:close,services_status-container:col2:close,traffic_graphs-container:col2:show</sequence>
		<traffic_graphs-config>LAN_graph-config:show,WAN_graph-config:show,refreshInterval=1</traffic_graphs-config></widgets> 
--------------------------------------------------------
Close browser (FF3 and IE7) start browser and login:
-------------------------------------------------------
	 <widgets><traffic_graphs-config>LAN_graph-config:show,WAN_graph-config:show,refreshInterval=1</traffic_graphs-config></widgets>

yoda715

@Perry:

Hmm mine gets overridden with the default setting everytime I logon. Did a pfSense reinstall with pfSense-Full-Update-1.3-ALPHA-ALPHA-20080723-0948.tgz
what i did (config.xml):


After Logon
-------------------
	 <widgets><traffic_graphs-config>LAN_graph-config:show,WAN_graph-config:show,refreshInterval=1</traffic_graphs-config></widgets> 
-----------------------------------
After adding widgets and saving
----------------------------------------
	 <widgets><sequence>system_information-container:col1:show,carp_status-container:col1:close,cpu_graphs-container:col1:close,gateways-container:col1:close,interface_statistics-container:col2:show,installed_packages-container:col2:show,interfaces-container:col2:show,ipsec-container:col2:close,load_balancer_status-container:col2:close,log-container:col2:close,services_status-container:col2:close,traffic_graphs-container:col2:show</sequence>
		<traffic_graphs-config>LAN_graph-config:show,WAN_graph-config:show,refreshInterval=1</traffic_graphs-config></widgets> 
--------------------------------------------------------
Close browser (FF3 and IE7) start browser and login:
-------------------------------------------------------
	 <widgets><traffic_graphs-config>LAN_graph-config:show,WAN_graph-config:show,refreshInterval=1</traffic_graphs-config></widgets>

Now that is even stranger than before. The config is in no way session based. Once you save the dashboard its written to the config. I would remove the entire <widget>entry in your config and see how that works. Sounds like your config is really messed up somehow.</widget>

Perry

Now that is even stranger than before. The config is in no way session based. Once you save the dashboard its written to the config. I would remove the entire <widget>entry in your config and see how that works. Sounds like your config is really messed up somehow.</widget>

I thought the same, that was why i did a reinstall from a 1.2 cd to snapshot. But let's see if others confirms it or i find a empty cd so i can burn a image :).

mrzaz

I tend to agree with Perry. I think I spoke to soon.

1. I removed the old "broken" settings in config.xml and rebooted.
2. I now get the default 3 widgets and the config.xml is empty with widget data.
3. I added some extra items to dashboard and saved. (saw in config.xml that it is saved OK)
4. I then rebooted the machine again and when I logged in it was back to before square 1
with no data on the dashboard and the config.xml was:

5. I then edited the config.xml again and removed the whole widgets section and rebooted.
6. I now get the default 3 widgets and the config.xml is empty with widget data.
7. I added some extra items to dashboard and saved. (saw in config.xml that it is saved OK)
8. Closed the FF window and open it again. (didn't have to give password !?) Dashboard intact with my saved data.
9. Closed the FF window and logged in using IE (this time I had to enter user/psw) and used same
as in FF. (admin/pfsense) and NOW we are back to square 1 again. No data on dashboard
and the config file shows:

Conclusion:
It feels like something is saving widget data to config.xml once to many with empty data
when you login.

It corrupts the widget data somehow between sessions.

///Dan Lundqvist

Ps. I will try again with the latest ALPHA-20080723-1247.tgz to see if anything is different. Get back with result.

Updates on ALPHA-20080723-1247:

Now I can see that your functions is removing the invalid widget setting (and the default dashboard is presented).
I then added an extra item on dash and saved. config.xml shows the corrected save-data.
I then closed the browser window and opened up IE and logged in again.
Now i'm back to the default dash (as something has corrupted the data again and your function has kicked
in to remove the faulty data.)
And now the "Traffic Graphs" widget has broken images.

dotdash

Tested by loading a new card with pfSense-20080723-1145.img
Seeing the same behavior as Perry. Getting a default page with Sys Info, Interfaces, Traffic Graphs. (Used to have Sys Info and the welcome to dashboard wizard). When I add say, service status, it's gone the next time I log in.

yoda715

Ok, I'm able to duplicate this issue and will take a look into it soon.

eri--

Can you all confirm that this fixes the problems.

Diagnostics->Edit File /usr/local/www/index.php
go to line 141 or search for _POST and change from
141 if ($_POST){

to
141 if ($_POST && $_POST['submit']){

Report back so i can fix it in CVS too.

Perry

Yes that did it ;)

yoda715

@ermal:

Can you all confirm that this fixes the problems.

Diagnostics->Edit File /usr/local/www/index.php
go to line 141 or search for _POST and change from
141 if ($_POST){

to
141 if ($_POST && $_POST['submit']){

Report back so i can fix it in CVS too.

Thanks Ermal! That's interesting why it needs that now. I would say lets modify it to only "if($_POST['submit']){…."

dotdash

The fix seems to be working on my system- I logged out and back in and the dashboard settings are retained. Thanks Ermal