What build should I use

fastcon68 · Aug 15, 2008, 11:52 PM

I am testing with a dual 800 PIII with two intel adapters. I have a 256 MB flash adapter that I am using for a hd any thoughs?

RC

databeestje · Aug 16, 2008, 8:57 PM

For production, just the 1.2-RELEASE pick a mirror close to you.

Cheers,

Seth

fastcon68 · Aug 16, 2008, 11:52 PM

this is for test I wanted to use the alpha. I have a verison, that I am currently running for production.
RC

databeestje · Aug 17, 2008, 8:14 AM

Then I would say the latest one :)

fastcon68 · Aug 17, 2008, 2:53 PM

What file should I use. There are quite a few? I tired a couple yesterday and was unsuccessful. That's why I was asking.
RC

databeestje · Aug 17, 2008, 5:43 PM

Do you already have a install? Then use a update file, if you have none, use the iso file which you can burn to cd.

The embedded .img and embedded update files are probably not what you need unless you have something without a monitor and or a CF card.

fastcon68 · Aug 18, 2008, 2:50 AM

I pull the current image down setup on the server then run the update. I do that in the AM. I am using a 256 MB flash drive now. trying to limit the total size and power requirements. Trying to find a 1U/2U case that I can put just the systemboard and flash drive in.

I can run it headless it's a tyan server board. i want to use this as a test box.
rc