Interface admin broken in Fri Aug 15 18:03:44 EDT build
-
It defaults to OPT4 (or, I would guess - the last interface) whichever way I try to enter interface administration on yesterdays build. This worked fine in previous [1.3] versions.
It seems the correct "tag" is sent in the querystring (ie. LAN, WAN, DMZ etc) but it looks like the php code disregards this and displays the last IF anyhow.
-
This is still present in the Sun Aug 17 15:52:29 EDT build.
Am I the only one seeing this, or am I the only one using the webinterface to configure my if's?
-
I see that too (1.3aa, Sunday Aug 17th build).
If I load: https://192.168…/interfaces_wan.php?if=opt1
I see the details for OPT3, or whatever is the higher value OPT interface.Nick
-
I can confirm the same issue.
Running 1.3-ALPHA-ALPHA
built on Sat Aug 23 05:59:05 EDT 2008
FreeBSD 7.0-RELEASE-p3/Urban
-
Same problem version built on Sat Aug 23
-
I can also confirm the issue of only being able to see OPT1 when clicking on OPT1 and WAN under the Interfaces menu. The link shows interface_wan.php and the issue can be replicated on IE, Firefox, and Opera. The LAN page works correctly under the Interfaces menu.
-
Fixed. Please test next snapshot.
-
-
Have 3 NIC-s (re0, sk0, bge0) and want "many" vlan-s.
1. Max interfaces count (phys. NIC-s + VLAN-s) can assign in web admin = 4 (not all OK).
( ! If vlan-s created under console !)
2. Max interfaces count (phys. NIC-s + VLAN-s) can assign in web admin = 12.
** ( ! If vlan-s created using webgui - not in console !)**
12 - LAN(bge0) - WAN(re0) = 10
OPT1 = sk0 , OPT2…OPT10 Vlan-s on sk0
After OPT10 assignment all next add(+) click-s does nothing...
3. Tested on "many" latest snapshots incl. 20080902-0146.iso. -
Try next snapshot should be fixed.
-
1. Web admin related (2) - FIXED.
2. Console related (1) - NO changes , only 4 interfaces (re0,sk0,bge0,re0?)… -
The console option is only there for the intial setup so the webui can be accessed.
It is not ment for complete configuration.