Racoon: [Unknown Gateway/Dynamic]: ERROR: such policy already exists. anyway rep
-
can you help me
my pfsense ipsec tunnels is not workerror message is
racoon: [Unknown Gateway/Dynamic]: ERROR: such policy already exists. anyway replace it: 192.168.1.0/24[0] 192.168.3.0/24[0] proto=any dir=out
racoon: [Unknown Gateway/Dynamic]: ERROR: such policy already exists. anyway replace it: 192.168.1.16/32[0] 192.168.1.0/24[0] proto=any dir=out
racoon: [Unknown Gateway/Dynamic]: ERROR: such policy already exists. anyway replace it: 192.168.3.0/24[0] 192.168.1.0/24[0] proto=any dir=in
racoon: [Unknown Gateway/Dynamic]: ERROR: such policy already exists. anyway replace it: 192.168.1.0/24[0] 192.168.1.16/32[0] proto=any dir=in -
At least "try" to use the search
http://forum.pfsense.org/index.php?action=search
keywords: "racoon: [Unknown Gateway/Dynamic]"(i dont use IPSEC on pfSense but with the search i was able to find an immediately answer to your question)
-
I try to use the search keywords: "racoon: [Unknown Gateway/Dynamic]"
find many question.but i explored every avenue but could not find a solution.
eveybody can help me? -
Search Hint was gerat: 1st place I found this posting ;D
-
my pfsense ipsec tunnels is still not work
eveybody can help me? -
Please post your config
regards
heiko -
my VPN: IPsec:1
Interface: wan
Remote subnet:192.168.3.0/24
Remote gateway:192.168.4.1Phase 1 proposal (Authentication)
Negotiation mode:Aggressive
My identifier:User FQDN–>123@test.com
Encryption algorithm:3DES
Hash algorithm:SHA1
DH key group:2
Lifetime:1200
Authentication method:Pre-shared Key
Pre-Shared Key:vpnPhase 2 proposal (SA/Key Exchange)
Protocol:ESP
Encryption algorithms:select 3DES ,Blowfish,CAST128,Rijndael (AES),Rijndael 256
Hash algorithms:SHA1,MD5
PFS key group:Off
Lifetime:1200my VPN: IPsec:2
Interface: wan
Remote subnet:192.168.1.0/24
Remote gateway:192.168.4.2Phase 1 proposal (Authentication)
Negotiation mode:Aggressive
My identifier:User FQDN-->vpn@test.com
Encryption algorithm:3DES
Hash algorithm:SHA1
DH key group:2
Lifetime:1200
Authentication method:Pre-shared Key
Pre-Shared Key:vpnPhase 2 proposal (SA/Key Exchange)
Protocol:ESP
Encryption algorithms:select 3DES ,Blowfish,CAST128,Rijndael (AES),Rijndael 256
Hash algorithms:SHA1,MD5
PFS key group:Off
Lifetime:1200my Network 1
wan ip:192.168.4.2/24
lan ip: 192.168.1.16/24Netrowk 2
wan ip:192.168.4.1/24
lan ip: 192.168.3.20/24error message
racoon: [Unknown Gateway/Dynamic]: ERROR: such policy already exists. anyway replace it: 192.168.1.0/24[0] 192.168.3.0/24[0] proto=any dir=out
racoon: [Unknown Gateway/Dynamic]: ERROR: such policy already exists. anyway replace it: 192.168.1.16/32[0] 192.168.1.0/24[0] proto=any dir=out
racoon: [Unknown Gateway/Dynamic]: ERROR: such policy already exists. anyway replace it: 192.168.3.0/24[0] 192.168.1.0/24[0] proto=any dir=in
racoon: [Unknown Gateway/Dynamic]: ERROR: such policy already exists. anyway replace it: 192.168.1.0/24[0] 192.168.1.16/32[0] proto=any dir=inThank you
-
Please delete this SPD´s in the Diagnostics Page for ipsec, and then click on save on the ipsec configuration page. After that we will see…..
-
Please delete this SPD´s in the Diagnostics Page for ipsec, and then click on save on the ipsec configuration page. After that we will see…..
I already delete the SPD's in the Diagnostics Page ,and then click on save on the ipsec configuration page.
but it is not work ,the error message :racoon: [Unknown Gateway/Dynamic]: ERROR: such policy already exists. anyway replace it: 192.168.1.16/32[0]
192.168.1.0/24[0] proto=any dir=out
racoon: [Unknown Gateway/Dynamic]: ERROR: such policy already exists. anyway replace it: 192.168.1.0/24[0] 192.168.1.16/32[0] proto=any dir=in
racoon: [Self]: INFO: 192.168.1.16[500] used as isakmp port (fd=19)
racoon: INFO: fe80::250:baff:fef0:1e09%vr0[500] used as isakmp port (fd=18)
racoon: [Self]: INFO: 192.168.4.2[500] used as isakmp port (fd=17)
racoon: INFO: fe80::200:e8ff:fe4e:ae71%dc0[500] used as isakmp port (fd=16)
racoon: [Self]: INFO: 127.0.0.1[500] used as isakmp port (fd=15)
racoon: INFO: ::1[500] used as isakmp port (fd=14)
racoon: INFO: fe80::1%lo0[500] used as isakmp port (fd=13)
racoon: INFO: unsupported PF_KEY message REGISTER
racoon: [Self]: INFO: 192.168.1.16[500] used as isakmp port (fd=19)
racoon: INFO: fe80::250:baff:fef0:1e09%vr0[500] used as isakmp port (fd=18)
racoon: [Self]: INFO: 192.168.4.2[500] used as isakmp port (fd=17)
racoon: INFO: fe80::200:e8ff:fe4e:ae71%dc0[500] used as isakmp port (fd=16)
racoon: [Self]: INFO: 127.0.0.1[500] used as isakmp port (fd=15)
racoon: INFO: ::1[500] used as isakmp port (fd=14)
racoon: INFO: fe80::1%lo0[500] used as isakmp port (fd=13)please help me thank you
-
Is this dynamic to dynamic, if it is so, it will not work in 1.2. Dynamic to static in agressive mode works with the enabled option on the static side "allow mobile clients".
Regards
Heiko -
Thank you
My Ipsec vpn is workI ping my virtual network ip ,after 2 second ,the Ipsec vpn is on,
Thank You
-
Fine :D