SquidGuard 1.2.0_1 & pfsense 1.2 release only works without logging

dvserg

chown -R -v proxy /var/squidGuard
chmod -R -v 0755 /var/squidGuard

al_reidy

chown -R -v proxy /var/squidGuard
chmod -R -v 0755 /var/squidGuard

still no luck,
if i enable a log button this appears in /var/squid/log/cache.log

2008-08-26 08:23:23 [65179] (squidGuard): can't write to logfile /var/log/squidGuard.log
2008-08-26 08:23:23 [65179] syntax error in configfile /usr/local/etc/squidGuard/squidGuard.conf line 20
2008-08-26 08:23:23 [65179] going into emergency mode
2008-08-26 08:23:23 [65180] (squidGuard): can't write to logfile /var/log/squidGuard.log
2008-08-26 08:23:23 [65180] syntax error in configfile /usr/local/etc/squidGuard/squidGuard.conf line 20

then when i turn the logging off -
2008/08/26 08:24:07| helperOpenServers: Starting 3 'squidGuard' processes
2008-08-26 08:24:07 [65712] (squidGuard): can't write to logfile /var/log/squidGuard.log

and it works again.

thanks for your help…

al_reidy

ok, just changed the permissions on the /var/log/squidGuard.log and that message has gone from squids log.
in squidGuards log tab i cant view squidGuard.log due to
"squidguard_log report disabled"
although there isnt a menu to turn logging on or off. im sure i did see one a few weeks ago on the general settings tab?

i have just reinstalled the package on squid and squidguard to see if that helps.. it didnt but i got a new version of squid. :)

thanks

Al

ryven

I'm having the same issue

with all logs off, squidguard works
I only enabled log in Default after which

in /var/log/squidGuard.log:
syntax error in configfile /usr/local/etc/squidGuard/squidGuard.conf line 61
going into emergency mode

my /usr/local/etc/squidGuard/squidGuard.conf:
acl {
#
default {
pass worksites whitelist !blacklist !pornsites !media_block all
redirect 301:http://myserver/sqerror.htm
#line 61# log {SQUIDGUARD_ACCESSBLOCK_FILE}
}

I'm not sure if the log {SQUIDGUARD_ACCESSBLOCK_FILE} format is pfsense specific, but all example file use the format is
log block.log

dvserg

@ryven:

I'm having the same issue

#line 61# log {SQUIDGUARD_ACCESSBLOCK_FILE}
}

I'm not sure if the log {SQUIDGUARD_ACCESSBLOCK_FILE} format is pfsense specific, but all example file use the format is
log block.log

Thanks, this is my bug.. will be fixed in near time

ryven

Can i manually set the log to block.log
where should the file be and what permission should it have

dvserg

@ryven:

Can i manually set the log to block.log
where should the file be and what permission should it have

You can find
"log {SQUIDGUARD_ACCESSBLOCK_FILE}"
strings in /usr/local/pkg/squidguard_configurator.inc and replace it to
"log " . SQUIDGUARD_ACCESSBLOCK_FILE
and 'Apply' in GUI.

–-
Possible renew GUI, bug fixed.

ryven

Did it and all working.
there were three instances that needed to be changed (that i found in any case)
Thnx for the help

dvserg

@ryven:

Did it and all working.
there were three instances that needed to be changed (that i found in any case)
Thnx for the help

Now can renew XML. Bug already fixed.

al_reidy

Hell yeah!
Cheers guys

;D

Al