SpamD v4.3.7 on 1.2.1-RC1

cheesyboofs

It apparently works in 1.3.

God knows how?

Can't try vanilla install of 1.3 as I don't have a spare CD-R at the moment but I fear it will be the same!

Upgrade from 1.2.1 TO-> 1.3-ALPHA-ALPHA built on Wed Aug 20 11:21:04 EDT 2008 FreeBSD 7.0-RELEASE-p3

# /usr/local/etc/rc.d/spamd.sh start
/usr/local/etc/rc.d/spamd.sh: /sbin/mount_fdescfs: not found
whitelist whitelist 0 entries
blacklist blacklist 0 entries
spamd: spamlogd: Can't find service "spamd-sync" in /etc/servicesCan't find service "spamd-sync" in /etc/services

1.jpg_thumb

2.jpg_thumb

cheesyboofs

Does the pfSense spamd package support multi WAN? i.e. If my mail comes in and goes out of my opt interface should it still work?

sullrich

Fixed the /etc/services issues.

I would think that spamd should be able to accept mail on all interfaces, IIRC. It listens on ..

cheesyboofs

fresh install from ISO 1.2.1-RC1 built on Wed Aug 13 04:23:51 EDT 2008 + spamd 4.3.7

Just not doing anything for me, mails arn't even slowed!

/usr/local/etc/rc.d/spamd.sh start

/usr/local/etc/rc.d/spamd.sh: /sbin/mount_fdescfs: not found
spamd: whitelist whitelist 0 entries
blacklist blacklist 0 entries
Getting http://www.openbsd.org/spamd/traplist.gz
bind: Address already in use

blacklist UofATraplist 38691 entries

/usr/local/etc/rc.d/spamd.sh restart

No matching processes were found
killall: warning: kill -TERM 21771: No such process
killall: warning: kill -TERM 21769: No such process
/usr/local/etc/rc.d/spamd.sh: /sbin/mount_fdescfs: not found
whitelist whitelist 0 entries
blacklist blacklist 0 entries
Getting http://www.openbsd.org/spamd/traplist.gz

pfctl: /dev/fd/7: No such file or directory

blacklist UofATraplist 38691 entries

Why does it say, Address already in use?
Why does it say, /sbin/mount_fdescfs: not found?

UPDATE to: 1.2.1-RC1 built on Mon Aug 25 07:40:58 EDT 2008

Executing custom_php_resync_config_command()…done.
Writing configuration... done.
Starting service.

All packages reinstalled.

/usr/local/etc/rc.d/spamd.sh restart

No matching processes were found
killall: warning: kill -TERM 3829: No such process
killall: warning: kill -TERM 3826: No such process
/usr/local/etc/rc.d/spamd.sh: /sbin/mount_fdescfs: not found
whitelist whitelist 0 entries
blacklist blacklist 0 entries
Getting http://www.openbsd.org/spamd/traplist.gz

pfctl: /dev/fd/7: No such file or directory

blacklist UofATraplist 38374 entries

Guest

SpamD is working fine for us in production on a single-WAN setup. We have not tested with multi-WAN, but for single-WAN it works very well, except for the RRD graphs not being updated.

wallabybob

@cheesyboofs:

Why does it say, Address already in use?

Something else is already listening on the port (smtp port?) spamd uses?

cheesyboofs

My understanding is that spamd listens on 127.0.0.1 and then forwards on to my mail server (ip)

rc_start() {
/sbin/mount_fdescfs fdescfs /dev/fd
/usr/local/sbin/spamd-setup -d &
/sbin/pflogd &
/usr/local/libexec/spamd -G 25:4:864 -n "pfsense" -c 800 -B 700 -w 1 127.0.0.1 &
/usr/local/libexec/spamlogd

}

I still have my NAT and firewall rule in place for port 25, should this be removed once spamd is installed? or should I change it so that port 25 is routed to 127.0.0.1 (pfsense) instead and then let spamd forward it on to exchange?

mail.jpg_thumb

nocer

Hi.

My spamd runs fine on 1.3(I know nothing about 1.2.1, sorry) box, only difference is the port#, I use 8025 instead. I've configured "spamd -g" runs at localhost:8025. The following is my quick/dirty but works fine pf rules;

–-
table <spamd>persist
table <spamd-white>persist
no rdr on { lo0, lo1 } from any to any
rdr pass inet proto tcp from <spamd>to any port smtp -> 127.0.0.1 port 8025
rdr pass inet proto tcp from ! <spamd-white>os {"Windows 2000", "Windows XP"} to any port smtp -> 127.0.0.1 port 8025

It look like you're getting "fdescfs" nags because there's no "mount_fdescfs" command exists in /sbin, but spamd requires /dev/fd for updating its white-list. Copy mount_fdescfs from other FreeBSD or use /boot/kernel/fdescfs.ko instead. Add the following line in your fstab; fdescfs /dev/fd fdescfs rw 0 0

This is only my environment and may not fit yours but really hope this helps.</spamd-white></spamd></spamd-white></spamd>

cheesyboofs

I think I have figured it out and now have it working I think!

I removed my WAN -> LAN NAT entry and changed my port 25 rule and now I'm getting mails graylisted as I should.

Just look at how many I got in the first 40 seconds of the service being up and running and you will see why I was so keen to get it working.

@ Sullrich - might be an idea to have a prompt on the spamd config page to mention removing existing NAT entries.

@ MOD's please move to the packages section of the forum as this issue was clearly not related to 1.2.1, many thanks to all.

mail2.jpg_thumb

mail.jpg_thumb

cheesyboofs

I think I'm nearly there, I am now correctly getting white list entries for known good servers but I'm still not getting the mails?
I can see them coming in via the logs on the firewall but I don't think they are getting sent on to exchange.

Apart from the NextMTA: 192.168.100.5 is there anything else I need to tweak? NAT maybe?

Help!

EDIT: @ sullrich I think nocer has something

but spamd requires /dev/fd for updating its white-list.

as none of the whitlist entries blow have been copied to /var/db/whitelist.txt. So I have used the white list tab to add some (not the silly button) and this updated /var/db/whitelist.txt still not getting any mails though.

mail3.jpg_thumb

nocer

@cheesyboofs:

EDIT: @ sullrich I think nocer has something

but spamd requires /dev/fd for updating its white-list.

as none of the whitlist entries blow have been copied to /var/db/whitelist.txt. So I have used the white list tab to add some (not the silly button) and this updated /var/db/whitelist.txt still not getting any mails though.

Hello, I'm not able to address your MTA issue but may /dev/fd or grey listing/white listing.

Well, while back ago I happend to see the following message every few minutes when struggling with spamd running;

–-
pfctl: /dev/fd/7: No such file or direcotry.

Then I realized that spamd uses pfctl to update its white-list table because looking thru the grey.c I found the following;

static char *pargv[11]= {
"pfctl", "-p", "/dev/pf", "-q", "-t",
"spamd-white", "-T", "replace", "-f" "-", NULL
};
–-

and it also does;

if (asprintf(&fdpath, "/dev/fd/%d", pfdev) == -1)
return(-1);
pargv[2] = fdpath;
–-

Basicall pfdev opens /dev/pf which is the file descriptor required. So I checked my /dev/fd and found so sad,

$ ls -l /dev/fd
total 0
crw-rw-rw- 1 root wheel 0, 18 Mar 4 23:14 0
crw-rw-rw- 1 root wheel 0, 20 Mar 4 23:14 1
crw-rw-rw- 1 root wheel 0, 22 Mar 4 23:14 2

There were only three of them, but as the error messages said pf needed 7 at least so I check another machine which ran OpenBSD, it had 65(0-64) of them there. So I did;

$ sudo mount_fdescfs fdescfs /dev/fd

which forced the kernel to make descriptors as needed and added the following into fstab;

fdescfs /dev/fd fdescfs rw 0 0

That's pretty much for now.

@ Sullrich
Would it be possible to add /sbin/mount_fdescfs at leaset because it is called in rc and modify fstab at the startup if there's spamd configured?

cheesyboofs

Thanks nocer,

Still not quite there yet!

sudo mount_fdescfs fdescfs /dev/fd

sudo: Command not found.

So;

vi /etc/fstab

Device Mountpoint FStype Options Dump Pass#

/dev/ad0s1a / ufs rw 1 1
/dev/ad0s1b none swap sw 0 0
fdescfs /dev/fd fdescfs rw 0 0
~

:wq!

mount -a

mount

/dev/ad0s1a on / (ufs, local)
devfs on /dev (devfs, local)
/dev/md0 on /var/run (ufs, local)
devfs on /var/dhcpd/dev (devfs, local)
fdescfs on /dev/fd (fdescfs)

ls -l /dev/fd

total 16
crw–w---- 1 root tty 0, 113 Aug 31 12:07 0
crw--w---- 1 root tty 0, 113 Aug 31 12:07 1
crw--w---- 1 root tty 0, 113 Aug 31 12:07 2
d-w------- 1 root wheel 512 Aug 20 18:37 3
d--------- 1 root wheel 512 Aug 29 17:06 4

/usr/local/etc/rc.d/spamd.sh restart

No matching processes were found
killall: warning: kill -TERM 96371: No such process
killall: warning: kill -TERM 96369: No such process
/usr/local/etc/rc.d/spamd.sh: /sbin/mount_fdescfs: not found
whitelist whitelist 0 entries
blacklist blacklist 0 entries

ls -l /sbin

total 2614
-r-xr-xr-x 1 root wheel 7364 Aug 13 04:51 adjkerntz
-r-xr-xr-x 1 root wheel 13664 Aug 13 04:51 atacontrol
-r-xr-xr-x 1 root wheel 819 Nov 16 2005 athctrl.sh
-r-xr-xr-x 1 root wheel 28636 Aug 13 04:51 bsdlabel
-r-xr-xr-x 1 root wheel 6096 Aug 13 04:51 conscontrol
-r-xr-xr-x 1 root wheel 342500 Aug 13 05:23 devd
-r-xr-xr-x 1 root wheel 10992 Aug 13 04:51 devfs
-r-xr-xr-x 1 root wheel 74456 Aug 13 04:51 dhclient
-r-xr-xr-x 1 root wheel 8876 Jul 2 2007 dhclient-script
-r-xr-xr-x 1 root wheel 28636 Aug 13 04:51 disklabel
-r-xr-xr-x 1 root wheel 6048 Aug 13 04:51 dmesg
-r-xr-xr-x 1 root wheel 47788 Aug 13 04:51 dump
-r-xr-xr-x 1 root wheel 11516 Aug 13 04:51 dumpfs
-r-xr-xr-x 1 root wheel 4676 Aug 13 04:51 dumpon
-r-xr-xr-x 1 root wheel 6848 Aug 13 04:51 fastboot
-r-xr-xr-x 1 root wheel 6848 Aug 13 04:51 fasthalt
-r-xr-xr-x 1 root wheel 23796 Aug 13 04:51 fdisk
-r-xr-xr-x 1 root wheel 14556 Aug 13 04:51 fsck
-r-xr-xr-x 1 root wheel 87016 Aug 13 04:51 fsck_4.2bsd
-r-xr-xr-x 1 root wheel 87016 Aug 13 04:51 fsck_ffs
-r-xr-xr-x 1 root wheel 27944 Aug 13 04:51 fsck_msdosfs
-r-xr-xr-x 1 root wheel 87016 Aug 13 04:51 fsck_ufs
-r-xr-xr-x 1 root wheel 20276 Aug 13 04:51 gcache
-r-xr-xr-x 1 root wheel 20276 Aug 13 04:51 gjournal
-r-xr-xr-x 1 root wheel 20276 Aug 13 04:51 glabel
-r-xr-xr-x 1 root wheel 20276 Aug 13 04:51 gmirror
-r-xr-xr-x 1 root wheel 20276 Aug 13 04:51 gmultipath
-r-xr-xr-x 1 root wheel 20276 Aug 13 04:51 gpart
-r-xr-xr-x 1 root wheel 39120 Aug 13 04:51 growfs
-r-xr-xr-x 1 root wheel 20276 Aug 13 04:51 gvirstor
-r-xr-xr-x 1 root wheel 6848 Aug 13 04:51 halt
-r-xr-xr-x 1 root wheel 6904 Aug 13 04:51 idmapd
-r-xr-xr-x 1 root wheel 87856 Aug 13 04:51 ifconfig
-r-xr-xr-x 1 root wheel 434100 Aug 13 04:51 init
-r-xr-xr-x 1 root wheel 76988 Aug 13 04:51 ipfw
-r-xr-xr-x 1 root wheel 26552 Aug 13 04:51 iscontrol
-r-xr-xr-x 1 root wheel 7272 Aug 13 04:51 kldconfig
-r-xr-xr-x 1 root wheel 3756 Aug 13 04:51 kldload
-r-xr-xr-x 1 root wheel 5312 Aug 13 04:51 kldstat
-r-xr-xr-x 1 root wheel 4412 Aug 13 04:51 kldunload
-r-xr-xr-x 1 root wheel 18476 Aug 13 04:51 ldconfig
-r-xr-xr-x 1 root wheel 9668 Aug 13 04:51 md5
-r-xr-xr-x 1 root wheel 10300 Aug 13 04:51 mdconfig
-r-xr-xr-x 1 root wheel 14284 Aug 13 04:51 mdmfs
-r-xr-xr-x 1 root wheel 4816 Aug 13 04:51 mknod
-r-xr-xr-x 1 root wheel 17036 Aug 13 04:51 mount
-r-xr-xr-x 1 root wheel 8812 Aug 13 04:51 mount_cd9660
-r-xr-xr-x 1 root wheel 14284 Aug 13 04:51 mount_mfs
-r-xr-xr-x 1 root wheel 10192 Aug 13 04:51 mount_msdosfs
-r-xr-xr-x 1 root wheel 6564 Aug 13 04:51 mount_nullfs
-r-xr-xr-x 1 root wheel 7124 Aug 13 04:51 mount_unionfs
-r-xr-xr-x 1 root wheel 29104 Aug 13 04:51 newfs
-r-xr-xr-x 1 root wheel 20024 Aug 13 04:51 newfs_msdos
lr-xr-xr-x 1 root wheel 17 Aug 20 18:28 nologin -> /usr/sbin/nologin
-r-xr-xr-x 1 root wheel 205672 Aug 13 04:51 pfctl
-r-xr-xr-x 1 root wheel 18772 Aug 13 04:51 pflogd
-r-xr-xr-x 1 root wheel 23872 Aug 13 04:51 ping
-r-xr-xr-x 1 root wheel 31196 Aug 13 04:51 ping6
-r-xr-xr-x 1 root wheel 6848 Aug 13 04:51 reboot
-r-xr-xr-x 1 root wheel 7812 Aug 13 04:51 recoverdisk
-r-xr-xr-x 1 root wheel 9668 Aug 13 04:51 rmd160
-r-xr-xr-x 1 root wheel 23644 Aug 13 04:51 route
-r-xr-xr-x 1 root wheel 85808 Aug 13 04:51 routed
-r-xr-xr-x 1 root wheel 14456 Aug 13 04:51 rtquery
-r-xr-xr-x 1 root wheel 22676 Aug 13 04:51 rtsol
-r-xr-xr-x 1 root wheel 58056 Aug 13 04:51 setkey
-r-xr-xr-x 1 root wheel 9668 Aug 13 04:51 sha1
-r-xr-xr-x 1 root wheel 9668 Aug 13 04:51 sha256
-r-xr-xr-x 1 root wheel 10700 Aug 13 04:51 shutdown
-r-xr-xr-x 1 root wheel 7472 Aug 13 04:51 swapctl
-r-xr-xr-x 1 root wheel 7472 Aug 13 04:51 swapoff
-r-xr-xr-x 1 root wheel 7472 Aug 13 04:51 swapon
-r-xr-xr-x 1 root wheel 14204 Aug 13 04:51 sysctl
-r-xr-xr-x 1 root wheel 10500 Aug 13 04:51 tunefs
-r-xr-xr-x 1 root wheel 14476 Aug 13 04:51 umount

@ Submicron, I am genuinely please yours is working for you but that doesn't change the fact that mine is not from a fresh install! It does not change the fact that there seems to be missing files IMHO.
Is it possible that yours is working because you have upgraded from 1.1 or 1.2 or have another app installed and that is why you have the missing files?

Regards to all.

nocer

@cheesyboofs:

sudo mount_fdescfs fdescfs /dev/fd

sudo: Command not found.

Ooops, command not exist so you need to copy from another FreeBSD machine. However,

vi /etc/fstab

Device Mountpoint FStype Options Dump Pass#

/dev/ad0s1a / ufs rw 1 1
/dev/ad0s1b none swap sw 0 0
fdescfs /dev/fd fdescfs rw 0 0
~

:wq!

is quite a way of workaround(this forces to load fdescfs.ko which is a heart of mount_fdescfs command), as I said in previous post.
Now you're not seeing fd related errors at least and can ignore "/usr/local/etc/rc.d/spamd.sh: /sbin/mount_fdescfs: not found" message.

cheers,

cheesyboofs

Its still not playing ball and its quite frustrating because I have traphic shaping, openvpn and load-balancing working so this should be a walk in the park.

I fired up an old 6.2 VM (1.2-Release) and sure enough there are extra files, missing in 7 (1.2.1-BETA) So I copied over mount_fdescfs from 6.2 to 7,

But now I get another file missing!

/usr/local/etc/rc.d/spamd.sh restart

No matching processes were found
killall: warning: kill -TERM 25083: No such process
/libexec/ld-elf.so.1: Shared object "libc.so.6" not found, required by "mount_fdescfs"
whitelist whitelist 0 entries
blacklist blacklist 0 entries

What a right pain in the arse :-\

cheesyboofs

ls /lib

geom libc.so.6 libmd.so.4
libalias.so.6 libc.so.7 libncurses.so.7
libalias_cuseeme.so libcam.so.4 libncursesw.so.7
libalias_dummy.so libcrypt.so.4 libpcap.so.5
libalias_ftp.so libcrypto.so.5 libreadline.so.7
libalias_irc.so libdevstat.so.6 libsbuf.so.4
libalias_nbt.so libedit.so.6 libssp.so.0
libalias_pptp.so libgcc_s.so.1 libthr.so.3
libalias_skinny.so libgeom.so.4 libufs.so.4
libalias_smedia.so libipsec.so.3 libutil.so.7
libbegemot.so.3 libkiconv.so.3 libz.so.4
libbsdxml.so.3 libkvm.so.4
libbsnmp.so.4 libm.so.5

cat /etc/fstab

Device Mountpoint FStype Options Dump Pass#

/dev/ad0s1a / ufs rw 1 1
/dev/ad0s1b none swap sw 0 0
fdescfs /dev/fd fdescfs rw 0 0

/usr/local/etc/rc.d/spamd.sh restart

No matching processes were found
killall: warning: kill -TERM 29643: No such process
killall: warning: kill -TERM 29641: No such process
whitelist whitelist 0 entries
blacklist blacklist 0 entries

I have now copied over libc.so.6 from 1.2-Release and now I get no errors but I'm also not getting any hits in my Spamd Database and no mails to exchange. I am getting hits on the firewall rule. please check my settings to confirm I'm not missing anything obvious.

I have no NAT set up for port 25 because I'm asuming Spamd does that

As you can see I have six mails coming in but none in the spamd database.

1.jpg_thumb

2.jpg_thumb

3.jpg_thumb

4.jpg_thumb

wallabybob

That your restart attempts on spamd seem to consistently report events like

killall: warning: kill -TERM 96371: No such process

suggests to me that one or two processes that the spamd restart is supposed to start are not staying running.

An earlier reply showed

rc_start() {
/sbin/mount_fdescfs fdescfs /dev/fd
/usr/local/sbin/spamd-setup -d &
/sbin/pflogd &
/usr/local/libexec/spamd -G 25:4:864 -n "pfsense" -c 800 -B 700 -w 1 127.0.0.1 &
/usr/local/libexec/spamlogd

So after the spamd startup has completed spamd-setup, pflogd, spamd and spamlogd should have been started. I have only the vaguest knowledge of spamd so based only on conventions I have observed, I would expect pflogd, spamd and spamlogd to continue running in the background. An inspection of the stop function in /usr/local/etc/rc.d/spamd.sh should give clues to which processes should still be running. The ps command can then be used to check they are running. If you find any of the programs not running try starting it by typing the corresponding command in rc_start() - you might get some clues why the program didn't continue running. A few weeks ago I was chasing a problem with bandwidthd not staying running. It was only when I tried starting it by shell command that I discovered the problem was missing libraries.

The name spamd-setup suggests spamd-setup might perform purely an initialisation function and so exit when it has completed that. But the rc_start() function starts a number of processes asynchronously. So what if spamd starts BEFORE spamd-setup has completed its initialisation? (This question can be difficult to answer. Sometimes clues are left in log files.) spamd might exit (even exit quietly) if it starts before necessary initialisation has completed. You might have this problem if everything starts and stays running when you start the programs individually by shell command but find that one or more programs don't stay running when started by /usr/local/etc/rc.d/spamd.sh

cheesyboofs

Thanks for your response, I have done as you suggested and ran the commands manually to try and find out where it may be going wrong but am having trouble interpreting the results.

cat /usr/local/etc/rc.d/spamd.sh

#!/bin/sh

This file was automatically generated

by the pfSense service handler.

rc_start() {
/sbin/mount_fdescfs fdescfs /dev/fd
/usr/local/sbin/spamd-setup -d &
/sbin/pflogd &
/usr/local/libexec/spamd -G 25:4:864 -n "mail.cheeyboofs.co.uk" -c 800 -B 100 127.0.0.1 &
/usr/local/libexec/spamlogd

}

rc_stop() {
/usr/bin/killall spamd-setup
/usr/bin/killall spamlogd
/usr/bin/killall spamd
/usr/bin/killall pflogd
sleep 2
}

case $1 in
start)
rc_start
;;
stop)
rc_stop
;;
restart)
rc_stop
rc_start
;;
esac

–------------------------------------------------------

/sbin/mount_fdescfs fdescfs /dev/fd

/usr/local/sbin/spamd-setup -d &

[1] 74419

whitelist whitelist 0 entries

blacklist blacklist 0 entries
#/sbin/pflogd &
[2] 74458
[1] Done
#/usr/local/sbin/spamd-setup -d

/usr/local/libexec/spamd -G 25:4:864 -n "mail.cheeyboofs.co.uk" -c 800 -B 100 127.0.0.1 &

[3] 74581
[2] Done
#/sbin/pflogd

/usr/local/libexec/spamlogd

[3] + Done
#/usr/local/libexec/spamd -G 25:4:864 -n mail.cheeyboofs.co.uk -c 800 -B 100 …

–------------------------------------------------------

PID USERNAME THR PRI NICE SIZE RES STATE TIME WCPU COMMAND
1829 root 4 44 20 3596K 1088K select 0:55 0.00% slbd
1675 root 1 8 20 3484K 1624K wait 0:25 0.00% sh
1531 root 1 8 20 3132K 800K nanslp 0:07 0.00% check_reload_status
1469 _ntp 1 44 0 3132K 1224K select 0:05 0.00% ntpd
857 root 1 4 0 44824K 18140K accept 0:04 0.00% php
1450 dhcpd 1 44 0 3132K 2140K select 0:04 0.00% dhcpd
847 root 1 4 0 5072K 2828K kqread 0:03 0.00% lighttpd
545 root 1 44 0 4892K 3460K select 0:02 0.00% openvpn
452 root 1 -58 0 5696K 1848K bpf 0:01 0.00% tcpdump
393 _dhcp 1 44 0 3132K 1264K select 0:01 0.00% dhclient
316 _dhcp 1 44 0 3132K 1260K select 0:01 0.00% dhclient
856 root 1 4 0 45848K 18380K accept 0:01 0.00% php
924 nobody 1 44 0 3132K 1340K select 0:01 0.00% dnsmasq
68801 root 1 44 0 7736K 3276K select 0:00 0.00% sshd
1478 root 1 8 0 3212K 1256K nanslp 0:00 0.00% cron
71932 root 1 44 0 7736K 3188K select 0:00 0.00% sshd
1470 root 1 44 0 3132K 1216K select 0:00 0.00% ntpd
68843 root 1 44 0 4912K 2292K select 0:00 0.00% sftp-server
1533 root 1 8 0 3132K 888K nanslp 0:00 0.00% minicron
70234 root 1 44 0 3240K 1272K select 0:00 0.00% syslogd
72751 root 1 20 0 4524K 2380K pause 0:00 0.00% tcsh
118 root 1 44 0 1888K 452K select 0:00 0.00% devd
852 root 1 8 0 39704K 5236K wait 0:00 0.00% php
853 root 1 8 0 39704K 5236K wait 0:00 0.00% php
77733 root 1 44 0 3516K 1888K RUN 0:00 0.00% top
1568 root 1 8 0 3488K 1448K wait 0:00 0.00% login
1569 root 1 8 0 3488K 1448K wait 0:00 0.00% login
72081 root 1 -8 0 3132K 772K piperd 0:00 0.00% sshlockout_pf
72087 root 1 8 0 3484K 1336K wait 0:00 0.00% sh
72088 root 1 8 0 3484K 1348K wait 0:00 0.00% sh
68842 root 1 8 0 3484K 1324K wait 0:00 0.00% sh
1572 root 1 5 0 3484K 1344K ttyin 0:00 0.00% sh
77109 _spamd 1 8 0 13788K 4972K nanslp 0:00 0.00% spamd
1573 root 1 5 0 3484K 1344K ttyin 0:00 0.00% sh
1570 root 1 8 0 3484K 1336K wait 0:00 0.00% sh
1571 root 1 8 0 3484K 1336K wait 0:00 0.00% sh
77107 _pflogd 1 -58 0 3344K 1388K bpf 0:00 0.00% pflogd

–------------------------------------------------------

/usr/bin/killall spamd-setup

No matching processes were found

/usr/bin/killall spamlogd

/usr/bin/killall spamd

killall: warning: kill -TERM 74582: No such process

/usr/bin/killall pflogd

–------------------------------------------------------

PID USERNAME THR PRI NICE SIZE RES STATE TIME WCPU COMMAND
1829 root 4 44 20 3596K 1088K select 0:55 0.00% slbd
1675 root 1 8 20 3484K 1624K wait 0:26 0.00% sh
1531 root 1 8 20 3132K 800K nanslp 0:07 0.00% check_reload_status
1469 _ntp 1 44 0 3132K 1224K select 0:06 0.00% ntpd
857 root 1 4 0 44824K 18140K accept 0:04 0.00% php
1450 dhcpd 1 44 0 3132K 2140K select 0:04 0.00% dhcpd
847 root 1 4 0 5072K 2828K kqread 0:03 0.00% lighttpd
545 root 1 44 0 4892K 3460K select 0:02 0.00% openvpn
452 root 1 -58 0 5696K 1848K bpf 0:01 0.00% tcpdump
393 _dhcp 1 44 0 3132K 1264K select 0:01 0.00% dhclient
316 _dhcp 1 44 0 3132K 1260K select 0:01 0.00% dhclient
856 root 1 4 0 45848K 18380K accept 0:01 0.00% php
924 nobody 1 44 0 3132K 1340K select 0:01 0.00% dnsmasq
68801 root 1 44 0 7736K 3276K select 0:00 0.00% sshd
1478 root 1 8 0 3212K 1256K nanslp 0:00 0.00% cron
71932 root 1 44 0 7736K 3188K select 0:00 0.00% sshd
1470 root 1 44 0 3132K 1216K select 0:00 0.00% ntpd
68843 root 1 44 0 4912K 2292K select 0:00 0.00% sftp-server
1533 root 1 8 0 3132K 888K nanslp 0:00 0.00% minicron
70234 root 1 44 0 3240K 1280K select 0:00 0.00% syslogd
72751 root 1 20 0 4524K 2380K pause 0:00 0.00% tcsh
118 root 1 44 0 1888K 452K select 0:00 0.00% devd
852 root 1 8 0 39704K 5236K wait 0:00 0.00% php
853 root 1 8 0 39704K 5236K wait 0:00 0.00% php
78295 root 1 44 0 3516K 1756K RUN 0:00 0.00% top
1568 root 1 8 0 3488K 1448K wait 0:00 0.00% login
1569 root 1 8 0 3488K 1448K wait 0:00 0.00% login
72081 root 1 -8 0 3132K 772K piperd 0:00 0.00% sshlockout_pf
72087 root 1 8 0 3484K 1336K wait 0:00 0.00% sh
72088 root 1 8 0 3484K 1348K wait 0:00 0.00% sh
68842 root 1 8 0 3484K 1324K wait 0:00 0.00% sh
1572 root 1 5 0 3484K 1344K ttyin 0:00 0.00% sh
1573 root 1 5 0 3484K 1344K ttyin 0:00 0.00% sh
1570 root 1 8 0 3484K 1336K wait 0:00 0.00% sh
1571 root 1 8 0 3484K 1336K wait 0:00 0.00% sh
250 root 1 44 0 5020K 2812K select 0:00 0.00% sshd
453 root 1 -8 0 3132K 728K piperd 0:00 0.00% logger

–------------------------------------------------------

And I can't seem to find out what

spamd[73273]: /sbin/pfctl returned status 1

means, is it a good thing or bad thing?

Untitled-2.jpg_thumb

cheesyboofs

I have now given up on the Spamd package :( I have found a free package to install on the exchange server its self that does the same thing and does it well JEP(S) http://www.proxmea.com/?q=node/19
Cheers

wallabybob

I'll add an explanation in italics for some of the things you saw.

@cheesyboofs:

Thanks for your response, I have done as you suggested and ran the commands manually to try and find out where it may be going wrong but am having trouble interpreting the results.

/sbin/mount_fdescfs fdescfs /dev/fd

/usr/local/sbin/spamd-setup -d &

[1] 74419
The & on the end of the command causes it to run in the background without the shell waiting for it to complete. The command runs in process 74419

whitelist whitelist 0 entries

blacklist blacklist 0 entries
#/sbin/pflogd &
[2] 74458
[1] Done
process 74419 has exited: spamd-setup has completed
#/usr/local/sbin/spamd-setup -d

/usr/local/libexec/spamd -G 25:4:864 -n "mail.cheeyboofs.co.uk" -c 800 -B 100 127.0.0.1 &

[3] 74581
spamd is running in process 74581
[2] Done
pflogd has exited. This is suspicious. Perhaps there was already a pflogd running.
#/sbin/pflogd
Run pflogd, this time wait for its completion.

/usr/local/libexec/spamlogd

Now that the previous command (pflogd) has completed run spamlogd and wait for its completion.
[3] + Done
process 74581, spamd, has completed
#/usr/local/libexec/spamd -G 25:4:864 -n mail.cheeyboofs.co.uk -c 800 -B 100 …

And I can't seem to find out what

spamd[73273]: /sbin/pfctl returned status 1

means, is it a good thing or bad thing?

It probably means pfctl exited with status 1 which could be a status unique to pfctl or it could be pfctl reporting that it got an unexpected error return status 1 (EPERM, permission error) from a system call.

As I suspected spamd is exiting rather than continuing to run in the background. If you wanted to explore this further you could consult the spamd manual page by typing spamd into the man page or keyword search box at http://www.openbsd.org/cgi-bin/man.cgi (spamd came to FreeBSD from OpenBSD) and look for the command options for getting more output from spamd). If you don't already know your way around a Unix system you probably have a fair bit of learning if you want to pursue this further.

iced98lx

@cheesyboofs:

I have now given up on the Spamd package :( I have found a free package to install on the exchange server its self that does the same thing and does it well JEP(S) http://www.proxmea.com/?q=node/19
Cheers

what's the free version lacking over the paid version? (out of curiosity, run an exchange box as well)

SpamD v4.3.7 on 1.2.1-RC1

/usr/local/etc/rc.d/spamd.sh start

blacklist UofATraplist 38691 entries

/usr/local/etc/rc.d/spamd.sh restart

pfctl: /dev/fd/7: No such file or directory

/usr/local/etc/rc.d/spamd.sh restart

pfctl: /dev/fd/7: No such file or directory

–- table <spamd>persist table <spamd-white>persist no rdr on { lo0, lo1 } from any to any rdr pass inet proto tcp from <spamd>to any port smtp -> 127.0.0.1 port 8025 rdr pass inet proto tcp from ! <spamd-white>os {"Windows 2000", "Windows XP"} to any port smtp -> 127.0.0.1 port 8025

–- pfctl: /dev/fd/7: No such file or direcotry.

$ ls -l /dev/fd total 0 crw-rw-rw- 1 root wheel 0, 18 Mar 4 23:14 0 crw-rw-rw- 1 root wheel 0, 20 Mar 4 23:14 1 crw-rw-rw- 1 root wheel 0, 22 Mar 4 23:14 2

$ sudo mount_fdescfs fdescfs /dev/fd

fdescfs /dev/fd fdescfs rw 0 0

sudo mount_fdescfs fdescfs /dev/fd

vi /etc/fstab

Device Mountpoint FStype Options Dump Pass#

mount -a

mount

ls -l /dev/fd

/usr/local/etc/rc.d/spamd.sh restart

ls -l /sbin

sudo mount_fdescfs fdescfs /dev/fd

vi /etc/fstab

Device Mountpoint FStype Options Dump Pass#

/usr/local/etc/rc.d/spamd.sh restart

ls /lib

cat /etc/fstab

Device Mountpoint FStype Options Dump Pass#

/usr/local/etc/rc.d/spamd.sh restart

cat /usr/local/etc/rc.d/spamd.sh

This file was automatically generated

by the pfSense service handler.

/sbin/mount_fdescfs fdescfs /dev/fd

/usr/local/sbin/spamd-setup -d &

whitelist whitelist 0 entries

/usr/local/libexec/spamd -G 25:4:864 -n "mail.cheeyboofs.co.uk" -c 800 -B 100 127.0.0.1 &

/usr/local/libexec/spamlogd

/usr/bin/killall spamd-setup

/usr/bin/killall spamlogd

/usr/bin/killall spamd

/usr/bin/killall pflogd

/sbin/mount_fdescfs fdescfs /dev/fd

/usr/local/sbin/spamd-setup -d &

whitelist whitelist 0 entries

/usr/local/libexec/spamd -G 25:4:864 -n "mail.cheeyboofs.co.uk" -c 800 -B 100 127.0.0.1 &

/usr/local/libexec/spamlogd

–-
table <spamd>persist
table <spamd-white>persist
no rdr on { lo0, lo1 } from any to any
rdr pass inet proto tcp from <spamd>to any port smtp -> 127.0.0.1 port 8025
rdr pass inet proto tcp from ! <spamd-white>os {"Windows 2000", "Windows XP"} to any port smtp -> 127.0.0.1 port 8025

–-
pfctl: /dev/fd/7: No such file or direcotry.

$ ls -l /dev/fd
total 0
crw-rw-rw- 1 root wheel 0, 18 Mar 4 23:14 0
crw-rw-rw- 1 root wheel 0, 20 Mar 4 23:14 1
crw-rw-rw- 1 root wheel 0, 22 Mar 4 23:14 2