Has anyone tested 1.21 with a carp cluster?

heiko

Carp works with https in 1.2 as it should, 1.21 have a few bugs, at the moment with ipsec and carp clustering, wait and see…

regards
heiko

ask

"UnderCover",

Start a shell (via console or ssh) and try

fetch http://10.1.0.2:80/

If that doesn't work (with the username and password of the system that's trying to sync – remember, they have to be the same on both boxes), then figure out to fix that first.

ask

UnderCover

will do thank you let me know when you need more snapshot carp tests

thanks for your help

Juve

Juste a feedback to say that my 1.21 cluster is still running fine without any issue regarding CARP and/or synchronization.

;D

ask

@Juve:

Juste a feedback to say that my 1.21 cluster is still running fine without any issue regarding CARP and/or synchronization.

Do you use HTTP or HTTPS for the web interface?

ask

databeestje

We confirmed that https synchronisation atleast is not succeeding.

It should be fixed in a upcoming snapshot.

The carp cluster should otherwise function normally. It does so in my production setup at work.
We are still investigating a few other issues here.

ask

@databeestje:

We confirmed that https synchronisation atleast is not succeeding.

It should be fixed in a upcoming snapshot.

Great – will you post a note here when the fix is in a snapshot?

@databeestje:

The carp cluster should otherwise function normally. It does so in my production setup at work.
We are still investigating a few other issues here.

I can confirm that CARP (and syncing over http) is working.

UnderCover

can't wait ;D

Juve

Right, we use HTTP since the snapshot we use has problem with HTTPS. ;)

databeestje

Carp syncing works normally again.

Please confirm

UnderCover

updated to:

1.2.1-RC1
built on Fri Sep 5 13:18:42 EDT 2008

and it still fails

php: : A communications error occured while attempting XMLRPC sync with username admin http://10.1.0.2:80.

databeestje

Doublecheck usernames and check that you have a firewall rule allowing access to the remote webui

UnderCover

i have all that and it still fails

UnderCover

still failing with http

1.2.1-RC1
built on Wed Sep 10 12:46:21 EDT 2008

with error

Sep 10 16:26:47 php: : New alert found: A communications error occured while attempting XMLRPC sync with username admin http://10.1.0.2:80.
Sep 10 16:26:47 php: : A communications error occured while attempting XMLRPC sync with username admin http://10.1.0.2:80.

databeestje

I can't replicate it, sorry