Traffic Graphs not working
-
The SVG graph does't work for either my WAN connection, or my LAN connection. I'm using Firefox 3.0.1 (and IE7 - I get same result, 0kpbs in/0kpbs out). The WAN connection is a residential DSL connection getting an IP via DHCP.
I'm running 1.3-ALPHA-ALPHA, from the Mon Sep1 build.
-
Neither WAN/LAN work. Checked on FF2/3, IE7/8 both same result, 0kpbs in/out.
Opera 9.51 does work fine.My WAN is PPPoE.
Running 1.3-ALPHA-ALPHA built on Tue Sep 2 03:22:34 EDT 2008
EDIT: check safari just in case. same as ff and ie. 0kbps in/out.
-
Just uploaded the latest: 1.3-ALPHA-ALPHA built on Mon Sep 8 17:54:11 EDT 2008 FreeBSD 7.0-RELEASE-p4
LAN/WAN neither works on FF2/3, IE7/8, Safari. Only gives me 0Kbps in/out.
Very good works on Opera 9.51 by the way.
Issues are seen on both dashboard(gadget), and Status > Traffic Graph.
cheers,
-
Hmmm…still no luck with the 1.3-AA built on Thu Sep 11 19:05:37 EDT 2008.
cheers,
EDIT: Checked with the latest build, Thu Sep 11 21:03:35 EDT 2008. No luck. :P
EDIT2: SVG(dashboard, traffic tab) works fine only on Opera.
-
Works fine in IE8.
The reason it doesn't work in IE7 is due to lack of SVG support in the browser - if you install a plugin (there are several, Adobe comes to mind) for it, it'll work just fine.
-
Heh. It used to work unfortunately. I know it's never gonna work without a plugin. I have Adobe plugin installed.
-
Should be fixed on the next snapshot please confirm.
-
no luck 1.3-ALPHA-ALPHA built on Fri Sep 12 01:05:44 EDT 2008
-
I don't think this is a pfSense issue to be honest, as it's been working in all (as far as I can remember) 1.3 builds for me - and still is with my currently installed 1.3-ALPHA-ALPHA Thu Sep 11 08:36:21 EDT 2008 build.
I've checked and it's working in both IE7 and IE8 (with and without compability mode enabled) for me.
(Running on a Watchguard Firebox x700)
-
There were some cases when it might not work though its strange cause it works now on my setups and others are still reporting it does not work!?
Can you please try to open http://$ip_of_pfsense/graph.php?ifnum=lan&ifname=TEST and tell me the results?
-
@ermal:
There were some cases when it might not work though its strange cause it works now on my setups and others are still reporting it does not work!?
Can you please try to open http://$ip_of_pfsense/graph.php?ifnum=lan&ifname=TEST and tell me the results?
For me this shows a full screen version of the graph that shows no data (firefox 3.0.1 pfsense "1.3-ALPHA-ALPHA
built on Thu Sep 11 23:35:12 EDT 2008
FreeBSD 7.0-RELEASE-p4")Hope this helps.
-
Hello,
@ermal:
There were some cases when it might not work though its strange cause it works now on my setups and others are still reporting it does not work!?
Can you please try to open http://$ip_of_pfsense/graph.php?ifnum=lan&ifname=TEST and tell me the results?
That gives me the same as divilspawn reported. Tried on both FF 2.0.0.16 and 3.0.1, XP and Vista and both the same. OTOH, I also checked IE7/8 on XP(since SVG doesn't work on Vista)once again with re-installation of the SVG plugin, then showing the graphs again. So it was concluded to my setup for this, I apologize, however, the Firefox issues are still remain. As I said, SVG is not supported on Vista so the majority of users on Vista shall use Firefox(or Opera/Safari whatever has SVG supported) for viewing SVG.
@ermal : I think the issues I have been facing could be nailed down to Firefox now but it used to work fine with the same setup untill AUG17.
@emigrating : I suppose you're living on XP, could you do the same with Firefox please? IE works fine but Firefox doesn't on my setup using XP.cheers,
-
@emigrating : I suppose you're living on XP, could you do the same with Firefox please? IE works fine but Firefox doesn't on my setup using XP.
Nopes, Windows Vista, Windows Server 2003 and 2008 - all with varying IE installs (7 and 8). This works fine on all of them. I can install a copy of Firefox on the 2003/2008 servers (not willing to install it on my other boxes) and give it a try though?
-
Well, the SVG plugin doesn't work well on my Vista. It's only for up to XP but can be installed on Vista anyway but once I hit any SVG, Vista forces to stop IE7(IE8b2 too) working due to some conflicts(APPCRASH in the event log) then close and restart. Disable SVG plugin fixes this crash and restart problem but can't see any SVG's of course. :-\
@emigrating : Thanks for your info. Only difference is the version of Vista, I'm running Japanese. Could try loading Firefox if you wouldn't mind?
EDIT: It is DEP(Data Execution Prevention) that keeps SVG from running. Haven't tested DEP disabled which I'm not willing to do that.
EDIT2: Disabled DEP and confirmed SVG works on IE, on Vista(J). Something is strange…I will switch browser to Opera for SVG purposes. :'( -
Check next snapshot it is fixed.
Problem is that firefox cached aggressively and returned the same result from the query of interface statistics. -
Thanks alot. Let me do the 1st thing in the morning tomorrow.
cheers,
-
Works fine in Google Chrome
BaNoBi
-
Works fine in Google Chrome
nah…not for me. :-\
-
Hello,
@ermal:
Check next snapshot it is fixed.
Problem is that firefox cached aggressively and returned the same result from the query of interface statistics.Traffic Graphs back to normal in Status tab, however, still no graph in dashboard gadget. Tried remove/add graph gadget several times but didn't help.
Checked with Firefox 20016/301 and pfSense build is the latest, Wed Sep 17 20:07:27 EDT 2008. -
Try next snapshot.