Load balancer doesn't balance
-
Hi guys, i have four 1M dsl line, the traffic was keep running on 1 wan and other was dead even i set up the load balance. so below is my routing, take a look, hope you guys reply, thx alot ;)
WAN 1 - 192.168.1.2/24 | gw 192.168.1.1
WAN 2 - 192.168.2.2/24 | gw 192.168.2.1
WAN 3 - 192.168.3.2/24 | gw 192.168.3.1
WAN 4 - 192.168.4.2/24 | gw 192.168.4.1LAN - 10.1.1.1/24
WAN's rule
PROTO –- SOURCE --- PORT --- DESTINATION --- PORT --- GATEWAY
WAN 1 * * * * * 192.168.1.1
WAN 2 * * * * * 192.168.2.1
WAN 3 * * * * * 192.168.3.1
WAN 4 * * * * * 192.168.4.1
LAN rule
PROTO --- SOURCE --- PORT --- DESTINATION --- PORT --- GATEWAY1 TCP LAN net * * 80 loadbalance
2 TCP LAN net * * 443 loadbalance
3 UDP LAN net * * 53 loadbalance
4 ICMP LAN net * * * loadbalance
5 TCP/UDP LAN net * * 1863 loadbalance
6 TCP/UDP LAN net * * 5050 loadbalance
7 TCP/UDP LAN net * * 6k-10k 192.168.3.1
8 TCP/UDP LAN net * * 10k-65k 192.168.4.1
<load_balancer><lbpool><type>gateway</type>
<behaviour>balance</behaviour>
<monitorip>208.67.222.222</monitorip>
<name>loadbalance</name>
<desc>loadbalance</desc>
<port><servers>wan|208.67.220.220</servers>
<servers>opt1|208.67.222.222</servers></port></lbpool>
<lbpool><type>gateway</type>
<behaviour>failover</behaviour>
<monitorip>208.67.222.222</monitorip>
<name>Wan1 Failto Wan2</name>
<desc>Wan1 Failto Wan2</desc>
<port><servers>wan|208.67.220.220</servers>
<servers>opt1|208.67.222.222</servers></port></lbpool>
<lbpool><type>gateway</type>
<behaviour>failover</behaviour>
<monitorip>208.67.220.220</monitorip>
<name>Wan2 Failto Wan1</name>
<desc>Wan2 Failto Wan1</desc>
<port><servers>opt1|208.67.222.222</servers>
<servers>wan|208.67.220.220</servers></port></lbpool></load_balancer>Routing Table
default 192.168.1.1 UGS 0 448642 1500 xl1
10.1.1/24 link#1 UC 0 0 1500 xl0
10.1.1.2 00:19:db:7f:27:cf UHLW 1 12407533 1500 xl0 836
127.0.0.1 127.0.0.1 UH 0 0 16384 lo0
192.168.1 link#2 UC 0 0 1500 xl1
192.168.1.1 00:1a:70:56:52:49 UHLW 3 5560 1500 xl1 1193
192.168.2 link#3 UC 0 0 1500 xl2
192.168.2.1 00:1c:10:9e:d1:3e UHLW 2 5560 1500 xl2 1190
192.168.3 link#4 UC 0 0 1500 xl3
192.168.3.1 00:1c:10:9e:d1:23 UHLW 2 5560 1500 xl3 1197
192.168.4 link#5 UC 0 0 1500 fxp0
192.168.4.1 00:1c:10:9e:d1:e3 UHLW 2 5560 1500 fxp0 1151
208.67.220.220 192.168.1.1 UGHS 0 48980 1500 xl1
208.67.222.222 192.168.2.1 UGHS 0 64556 1500 xl2 -
Hi try NATing each gateway
source 192.168.1.0/24 to destination gateway.
-
hi, i solved my problem already.
the round robin does work, but when i check on the sticky connection, the round robin will not run, why ? :-\