Netgate Discussion Forum
    • Categories
    • Recent
    • Tags
    • Popular
    • Users
    • Search
    • Register
    • Login

    DHCP requst fails

    General pfSense Questions
    3
    7
    2.7k
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • S
      Seth
      last edited by

      After varying length of time I'm unable to obtain an IP (DHCP Reservation) from pfSense.  I'm seeing spanning tree messages in the Vista event logs, but nothing stating that the adapter is being blocked.

      The following tasks have been taken before doing a soft reset

      -Reboot client (Vista)
        -warm
        -cold
        -Disconnect power from PC
      -Restart DHCP demon on PF

      Environment
      ALIX.2C3
      vr0 WAN
      vr1 LAN
      vr2 bridged to LAN

      No switch/Hub.  PC plugged into vr1.  vr2 is empty

      1.2-RELEASE built on Sun Feb 24 17:37:23 EST 2008 Platform embedded

      FYI WOL works all the time
      Speed/Duplex are correct on both ends

      Thanks for the help

      1 Reply Last reply Reply Quote 0
      • Cry HavokC
        Cry Havok
        last edited by

        Does anything show in pfSense?  What does a packet capture (on both the pfSense and the Vista host) show when you do an "ipconfig/release" then "ipconfig/renew" on the Vista host?

        1 Reply Last reply Reply Quote 0
        • S
          Seth
          last edited by

          I didn't run a trace when this was happening (I'll get one next time).  Computer is remote so getting a trace from the client side will be tough.  Logs on pfSense are clean.

          FYI WOL works all the time

          DHCP log from last nights problem

          
Nov 11 18:51:26 	dhcpd: DHCPACK to 192.168.3.5 (00:1d:09:99:3a:d7) via vr1
Nov 11 18:51:26 	dhcpd: DHCPINFORM from 192.168.3.5 via vr1
Nov 11 18:51:22 	dhcpd: DHCPACK on 192.168.3.5 to 00:1d:09:99:3a:d7 via vr1
Nov 11 18:51:22 	dhcpd: DHCPREQUEST for 192.168.3.5 (192.168.3.254) from 00:1d:09:99:3a:d7 via vr1
Nov 11 18:51:22 	dhcpd: DHCPOFFER on 192.168.3.5 to 00:1d:09:99:3a:d7 via vr1
Nov 11 18:51:22 	dhcpd: DHCPDISCOVER from 00:1d:09:99:3a:d7 via vr1
Nov 11 18:50:33 	dhcpd: Sending on Socket/fallback/fallback-net
Nov 11 18:50:33 	dhcpd: Sending on BPF/vr1/00:0d:b9:15:62:25/192.168.3/24
Nov 11 18:50:33 	dhcpd: Listening on BPF/vr1/00:0d:b9:15:62:25/192.168.3/24
Nov 11 18:50:33 	dhcpd: Wrote 0 leases to leases file.
Nov 11 18:50:33 	dhcpd: Wrote 0 new dynamic host decls to leases file.
Nov 11 18:50:33 	dhcpd: Wrote 0 deleted host decls to leases file.
Nov 11 18:50:33 	dhcpd: For info, please visit http://www.isc.org/sw/dhcp/
Nov 11 18:50:33 	dhcpd: All rights reserved.
Nov 11 18:50:33 	dhcpd: Copyright 2004-2006 Internet Systems Consortium.
Nov 11 18:50:33 	dhcpd: Internet Systems Consortium DHCP Server V3.0.5
Nov 11 18:50:27 	dhcpd: Sending on Socket/fallback/fallback-net
Nov 11 18:50:27 	dhcpd: Sending on BPF/vr1/00:0d:b9:15:62:25/192.168.3/24
Nov 11 18:50:27 	dhcpd: Listening on BPF/vr1/00:0d:b9:15:62:25/192.168.3/24
Nov 11 18:50:27 	dhcpd: Wrote 0 leases to leases file.
Nov 11 18:50:27 	dhcpd: Wrote 0 new dynamic host decls to leases file.
Nov 11 18:50:27 	dhcpd: Wrote 0 deleted host decls to leases file.
Nov 11 18:50:27 	dhcpd: For info, please visit http://www.isc.org/sw/dhcp/
Nov 11 18:50:27 	dhcpd: All rights reserved.
Nov 11 18:50:27 	dhcpd: Copyright 2004-2006 Internet Systems Consortium.
Nov 11 18:50:27 	dhcpd: Internet Systems Consortium DHCP Server V3.0.5
          1 Reply Last reply Reply Quote 0
          • W
            wallabybob
            last edited by

            The DHCP log clearly shows an address assignment from pfSense over vr1. I presume that is for the PC you used to capture the log.

            The Vista system is described as "remote". I presume then that its on the other side of the WAN link. Whats between the Vista system and pfSense?

            1 Reply Last reply Reply Quote 0
            • S
              Seth
              last edited by

              1.  I started getting DHCP addresses after a soft reboot of the pfSense box after 18:50.  Non of the remedy's listed in the original post worked. 
              2. The Vista box is connected directly to the Alix at vr1.  No switch or hub.  vr1 is LAN.  vr2 is bridged to LAN.  vr2 is not populated
              3. The management PC is coming over VPN (site to site)

              1 Reply Last reply Reply Quote 0
              • W
                wallabybob
                last edited by

                It sounds as if it should have worked before. Its difficult to wind back the clock to see what was different then that it didn't work then.

                Perhaps it would be worthwhile doing a few ipconfig/release ipconfig/renew sequences on the Vista box to test whether you have some sort of intermittent problem. Even try changing the DHCP address ranges a few times to ensure the Vista box is assigned different IP addresses and so force the software through at least a couple of different paths (reassigned previous address; assigned new address).

                1 Reply Last reply Reply Quote 0
                • S
                  Seth
                  last edited by

                  I think the problem is with pfSense.

                  I ran ipconf /release and /renew
                  Rebooted PC
                  unplugged it form AC
                  disconnected reconnected network cable
                  and
                  restarted the dhcp demon on pfsense.

                  Running a capture now from pf for dhcp traffic waiting for it to fail.

                  Will setup a script on Vista to release and renew to see if I can force the issue.

                  1 Reply Last reply Reply Quote 0
                  • First post
                    Last post
                  Copyright 2025 Rubicon Communications LLC (Netgate). All rights reserved.