Pfsense needs to be restartet in case of pppoe 24h disconnect
-
Had the same behaviour too. I have a Wimax-based ISP and they have frequent disconnections. When it happens, Pfsense does not automatically reconnect. Disconnect button does not work no matter how many times I click on it. If I go to Interfaces -> WAN and click "SAVE" then it's working again, no need to restart the computer.
However, I must always double check on the Interface -> WAN page because the Type always revert to "Static" instead of "PPPoE".
Running latest 1.3 ALPHA on a VA Linux 1221. Updated the firmware yesterday with the pfSense-20080823-2015.img but the status page still shows "built on Fri Aug 15 16:26:59 EDT 2008".
Hope this helps.
ArkAngel
-
You need to use the update files, not the img files as these are the embedded disk images.
-
You need to use the update files, not the img files as these are the embedded disk images.
Thanks, started to use the auto-update sunday, much better. But if I remember right, there are img files for the full install and images for the embedded. I never used the embedded. If I did not used the right image I think it would not have permitted the firmware upgrade.
ArkAngel
-
Hi,
the problem is still present and i think its a major bug for pppoe users, who cannot use it for wan connections. In germany nearly all DSL Providers give only pppoe access. If i just hit the "save" Button under my WAN Interface it took along time until the webinterface reacts to it (it seems to be frozen, also if i try to access it while he is restarting the mpd services). I added now a cronjob to restart every 24 hours the pfSense Box but it its not a solution.
-
When you enable this feature it is supposed to setup a cron entry. Do you see the entry in /etc/crontab?
-
I think it is the code underlying this that is broke not the cron job.
The PPPoE disconnect button has never worked for me on 2.0 (and 1.3) on embeded (never tried it on full).
When I click the disconnect button nothing happens and if I do get disconnected (I have no forced reset from my ISP) the button still says disconnect and when clicked has no effect. Just stays with disconnect as the text. The only way to get PPPoE to come up is to reboot.I think (but haven't looked too hard) that the disconnect code is looking at the interface (ie xl0) and not the PPPoE adaptor.
-
Yes there is a entry for the restart i think:
0 4 * * * root /etc/pppoerestarti tried to start it by hand. I got an error:
# /etc/pppoerestart Fatal error: Call to undefined function interfaces_wan_pppoe_restart() in /root/- on line 1so that might be why it will not disconnect to a given time. But i hope that he also reestablish the link to my dsl provider if he looses it at any time.
-
try latest snapshot and report.
-
Hi ermal,
same error occurs if try to restart it by hand with the latest snapshot.
Greetz,
mino -
Yeah i am going to trace this cause it happened to me at my home installation on pppoe too.
I will come back with something later tomorrow.Do you have anything in logs after mpd exits and it tries to restart it?!
-
I believe this should be fixed now. Please try next snapshot cycle.
If you want to test now, replace the pppoe_reconfigure function in /etc/pppoe_restart with interface_reconfigure();
-
PS: you need to click save on the wan interfaces configuration page to regenerate the /etc/pppoe_restart file..
-
As sullrich said retry with latest snapshot.
-
Okay, i installed the latest snapshot. I saved the WAN interface many times. But the /etc/pppoerestart file is still the same and so the error still occurs.
#!/bin/sh echo 'es_dyndns_reset(wan); ?>' | /usr/local/bin/php -q -
The new file should be on /var/etc/pppoefile actually.
It should have interface_reconfigure in it. -
Okay can be executed but it wont restart the wan session, it just reload the filter (seen in the logs)
# cat /var/etc/pppoewanrestart #!/bin/sh /usr/bin/touch /tmp/filter_dirty # -
Did you click save on the Interfaces -> WAN page?
The code is there…
define("CRON_PPPOE_CMD", "#!/bin/sh\necho '' | /usr/local/bin/php -q");
-
You are on an older snapshot. Try a new one.
-
So I have now the latest snapshot:
2.0-ALPHA-ALPHA
built on Fri Nov 21 04:39:23 EST 2008
FreeBSD 7.1-PRERELEASEConsole:
# cat /var/etc/pppoewanrestart #!/bin/sh /usr/bin/touch /tmp/filter_dirty ##cat /etc/crontab ... 0 4 * * * root /etc/pppoerestart 0 4 * * * root /var/etc/pppoewanrestart ...So you see still the same. And in my crontab are now two entries, i think the old entry and the new corrected one. I think i triggered the save routine now 3 times but same result.
And i recognized that if i save the wan configuration and aplly them the whole system is interuppted. I take up to 30 seconds until my box reacts on request (http, ssh and so on) to the box itself. I think a routine for resetting the interface or restarting the mpd daemon shut not block the whole system.
-
First edit /etc/crontab and remove both of those reset entries.
Next update to the snapshot that will be ready about 2 hours from this post. Next click save on interfaces, wan.
Check the file in /conf/ (not /var/etc/). /var/ is a ramdisk on embedded and that file will be wiped out on a reboot.