LightSquid not working in 1.2.1-RC2?
-
Hey all.
I installed 1.2.1-RC2 last week and everything's working great, with one exception, LightSquid.
Everything looks fine, except I get a blank screen when I try and look at the report. A "Refresh Now" and "Refresh Full" Don't appear to do anything. Squid is installed and logging is enabled, to /var/squid/log.
Any suggestions would be greatly appreciated.
-Marty
-
this worked for a friend of mine
http://forum.pfsense.org/index.php/topic,7363.15.html
http://forum.pfsense.org/index.php/topic,11594.15.html/F
-
Sol. for me:
1.- Disable Log in squid
2.- Save
3.- Enable logging en squid
Now refresh and voila! it's ok.Every reboot of pfsense i repeat this step
Un saludo!
Sorry for my english!
I spanish.
vmware - pfsense 1.2.1-rc2 -
And we're good to go!
For those interested, in the second thread fredde posted (http://forum.pfsense.org/index.php/topic,11594.15.html) AudiAddicts posts are what worked for me (and here they are):
Problem fixed with the help of dvserg!! (THANKS!!)
He asked me to post the instructions
- Remove package from GUI
- Go to the firewall shell and type pkg_info
- If lightsquid is listed, use PKG_delete to remove it (pkg_delete lightsquid-1.7.1_1)
- Reinstall from GUI now and it should be fixed!
Uninstall like explained above and then reinstall the package in the gui
then type in the shell :
ln -s /usr/local/bin/perl /usr/bin/perl
Make sure the log setting is switched on for squid and set to the standard dir and then go to lightsquid and refresh/update settings and it should work.