PfSense 2.0 Alpha and Vonage PAP2 Adaptor
-
This is making my head spin, anyways, here's the deal. I have a pfSense box hooked up, all the computers on the network can do their thing. I also have a WRT54G Wireless router on it's own private network. I have a Linksys PAP2 for my vonage phone. Now, when I plug the PAP2 into the WRT54G, everything is good. Now when I plug the PAP2 into the Switch, no connection. Here's my setup:
Internet –-> pfSense ---> Switch ---> WRT54G
| |
| |
PAP2 -->DoesntWork WorksIs there something i'm overlooking?
PS: It did the same thing with 1.2 RELEASE
-
What is the lan address of your PFSense box? Possibly on the same subnet…
-
pfsense: 192.168.1.1
WRT54G: WAN: DHCP from pfsense - 192.168.1.85
LAN: 192.168.2.1If i take the WRT54G completely out of the mix, my PAP2 still doesn't connect from the swtich
-
Do you get a link light? What is the IP of the PAP2 box?
-
Do you get a link light? What is the IP of the PAP2 box?
Yes i get a link light, but i get no indication on the pfsense that it even made a DHCP question, none of the logs show anything
-
If you look at the user page on the pap2, is it set to request via dhcp? Dumb question I know but sometimes the easiest thing…
-
If you look at the user page on the pap2, is it set to request via dhcp? Dumb question I know but sometimes the easiest thing…
If i hook it up to the WRT54G, It pulls a DHCP Request just fine. If i hook the PAP2 into the switch that pfsense is, nothing.
