Can not Get WebGUI

Photonicsia

What am I not seeing? I installed PfSense 1.2.2 Vlans and 4 of my Lan,Wan,opt1,opt2 went fine. I can not get the GUI for the life of me. I get stuck on an option screen (tried all options) 1-98…
0) Logout (SSH only)

Assign Interfaces
Set LAN IP Address
Reset webConfigurator password
.......etc, etc...

I have read all the tutorials and none tell you howto get into the GUI, but show me howto use it once im in it......

I know this is a noob question, but I really need some help here, I have been using Linux for years but this really has me stumped. ???

GruensFroeschli

Connect a computer to the LAN-Interface, get an IP per DHCP and type as address: http://IP_you_set_with_option_2

If you're using VLANs make sure you have a VLAN capable switch and configured it correctly.
If you dont know what i'm talking about, delete all VLANs and set it up simpler. (assign only physical interfaces).

Photonicsia

Thank you for the quick post. I was under the impression the GUI was a default option. Thanks again for your help.