FreeSWITCH package for pfSense 1.2.1 and 2.0 released. PBX or Proxy

cybrsrfr

"2009-01-10 22:31:17 [DEBUG] libdingaling.c:1175 on_stream() TLS NOT SUPPORTED IN THIS BUILD!"

I will work on enabling this on the next FreeSWITCH compile.

chpalmer

mcrane- First thing, You Rock! As do all the PFSense authors and support staff! Thanks to all of you!

Now to anyone else that knows… I thought I was able to dial from extension to extension when I first installed this package. I believe the reason I cant now is that both extensions exist on the same ATA as ports one and two. Its a Zoom in case it matters. I need to verify when I get a free moment but any comments...

I need to reread the thread here again in case its covered and I missed it but- my IVR message answers when I have the inbound pointed that way however when I press a number it hangs up. Im lost on this at this point.

Otherwise its working great! :) ;D

chpalmer

IVR seems to be working now… ;D :)

adrianhensler

@chpalmer:

mcrane- First thing, You Rock! As do all the PFSense authors and support staff! Thanks to all of you!

Now to anyone else that knows… I thought I was able to dial from extension to extension when I first installed this package. I believe the reason I cant now is that both extensions exist on the same ATA as ports one and two. Its a Zoom in case it matters. I need to verify when I get a free moment but any comments...

pfSense ftw for sure.

I'll take a stab at your question - I think you'll have to use different ports for the extensions as they will be on the same IP? Does that help? Or is that what you meant by 'ports one and two' now that I reread your message. Never heard of Zoom so I won't be any help there. Maybe I'll set up my linksys pap2 later tonight and see if I can get both channels on that to work.

chpalmer

Thanks: I think thats my problem. It appears the adapter may not be specifying the ports to the pbx correctly.

http://zoom.com/ These guys have been around for years. I used to have a 33k modem made by them. (Now Im not sure I actually have a modem in my house anywhere, but thats for another post…)

Im setting up another ata right now as I post this to seperate them out for more controlled conditions...

:) ;D

cybrsrfr

For those with a linksys pap2 each phone port has a different port by default example line 1 5060 and line 2 5061. I don't have a zoom yet but I believe it would be the same.

What model of zoom are you using? I've been looking at one zoom that has both 1 fxs and 1 fxo. The feature that really caught my eye was ilbc support. Ilbc codec is comparable to G729 if not better with its audio compression.

chpalmer

I have a model 5822 that was never released fully by them. I was a beta tester for a voip company and they sent it to me. I can find only one setting for local sip port on it. I believe it will only be good for one port.

cybrsrfr

FreeSWITCH package minor update.

Add International option to the Dialplan Expression tool,
Minor wording changes
Hide Outbound Caller ID on the Extensions tab. Effective Caller ID is used by FreeSWITCH.

cybrsrfr

New FreeSWITCH build 1.0.2 revision 11245. More modules have been compiled including mod_fax, mod_openzap, and mod_spidermonkey_odbc.

More info can be found on mod_fax at:
http://wiki.freeswitch.org/wiki/Mod_fax

In order to use fs_cli you would connect with ssh, then run the following commands. Replace the 192.168.1.1 with your own pfSense LAN IP address. The port and the password are settings that can be configured from the 'Settings' tab.

cd /usr/local/freeswitch/bin
./fs_cli -H 192.168.1.1 -P 8021 -p ClueCon

The following is a list of modules that are available. # is a comment any module with this in front of it was not compiled.

loggers/mod_console
loggers/mod_logfile
loggers/mod_syslog
applications/mod_commands
applications/mod_conference
applications/mod_dptools
applications/mod_enum
applications/mod_fifo
#applications/mod_fax (trying to build this time: failed)
applications/mod_voicemail
#applications/mod_lcr
applications/mod_limit
applications/mod_expr
applications/mod_esf
#applications/mod_easyroute
applications/mod_fsv
applications/mod_soundtouch
applications/mod_rss
applications/mod_snom
applications/mod_vmd
asr_tts/mod_flite
asr_tts/mod_pocketsphinx
#asr_tts/mod_cepstral
codecs/mod_g723_1
codecs/mod_amr
codecs/mod_g729
codecs/mod_h26x
codecs/mod_voipcodecs
codecs/mod_ilbc
codecs/mod_speex
codecs/mod_siren
codecs/mod_celt
dialplans/mod_dialplan_directory
dialplans/mod_dialplan_xml
dialplans/mod_dialplan_asterisk
directories/mod_ldap
endpoints/mod_dingaling
endpoints/mod_iax
#endpoints/mod_portaudio
endpoints/mod_sofia
endpoints/mod_loopback
#endpoints/mod_alsa
#endpoints/mod_opal
../../libs/openzap/mod_openzap
event_handlers/mod_event_multicast
event_handlers/mod_event_socket
event_handlers/mod_cdr_csv
#event_handlers/mod_radius_cdr
formats/mod_native_file
formats/mod_sndfile
formats/mod_shout
formats/mod_local_stream
formats/mod_tone_stream
#languages/mod_python
languages/mod_spidermonkey
languages/mod_spidermonkey_teletone
languages/mod_spidermonkey_core_db
languages/mod_spidermonkey_socket
languages/mod_spidermonkey_odbc
languages/mod_lua
#languages/mod_perl
#languages/mod_yaml
xml_int/mod_xml_rpc
xml_int/mod_xml_curl
xml_int/mod_xml_cdr
#xml_int/mod_xml_ldap
say/mod_say_en
say/mod_say_de
say/mod_say_es
say/mod_say_fr
say/mod_say_it
say/mod_say_nl
say/mod_say_zh

adrianhensler

mcrane: You are putting features in faster than I can play with them.

What's the status on the mod_openzap - if I put a digium card or clone in my machine, will my chances of making it work be reasonable? I have an ebay X100 type clone.

I took a look at the freeswitch wiki and it looks promising, is everything in place in the pfsense package to make this work? Or do I have to manually get the zaptel OS level modules in pfsense? Sorry, seems like a newbie question - but to get a zaptel card in my pfsense box I have to remove the wireless or move pfsense to a different box due to having only the one PCI slot.

I'd rather not go through those steps if it's not something that will work anyways - and I'm tempted to just use all voip anyways and drop the analog line. Still up for debate. Can't wait to look at the fax module.

cybrsrfr

I'm testing mod_openzap right now. I will report the results here.

mrguitar

….I can't wait to play w/ the mod_fax.

I vote that we change mcrane's status from Hero Member to "Super Hero Member."

cybrsrfr

mrguitar: I'm glad the work is appreciated! :)

Here is a little more…

SIP (TLS/SSL) and RTP (SRTP) Encryption Notes

FreeSWITCH

Run the following from SSH or the Console
./gentls_cert setup
//replace freeswitch.org with your domain name or IP address
./gentls_cert create -cn freeswitch.org -alt DNS:freeswitch.org

Vars tab

<x-pre-process cmd="set" data="sip_tls_version=sslv23">Enable SSL for the Internal profile

<x-pre-process cmd="set" data="internal_ssl_enable=true"><x-pre-process cmd="set" data="external_ssl_enable=false">Dialplans tab (default.xml)
In order to encrypt both sides of the call
Uncomment the following line:
<action application="export" data="sip_secure_media=true"><condition field="${sip_has_crypto}" expression="^(AES_CM_128_HMAC_SHA1_32|AES_CM_128_HMAC_SHA1_80)$" break="never"><action application="set" data="sip_secure_media=true"></action></condition>

Status tab
Should show (TLS) if it is enabled.
internal profile sip:mod_sofia@67.60.128.195:5061 RUNNING (0) (TLS)
internal-ipv6 profile sip:mod_sofia@[::1]:5061 RUNNING (0) (TLS)

Linksys SPA942
SIP tab
SRTP Method: s-descriptor

Ext 1
SIP Transport: TLS
SIP Port: 5061
SRTP Private Key: leave blank

Can make the calls secure using activation codes or set from the 'Users' tab.

Users Tab
Secure Call Setting: Yes

Regional (Activation Codes )
Secure All Call Act Code: *16
Secure No Call Act Code: *17
Secure One Call Act Code: *18
Secure One Call Deact Code: *19

For Additional information see:

FreeSWITCH Wiki
SIP (TLS / SSL)
http://wiki.freeswitch.org/wiki/Tls#Linksys_TLS_Setup

SRTP
http://wiki.freeswitch.org/wiki/SRTP</action></x-pre-process></x-pre-process></x-pre-process>

mrguitar

mcrane,

I might have found a small bug. (sorry if this has already been discussed, I didn't want to re-read this whole thread again)

I uploaded a lot of recordings and setup several IVRs. I noticed that none of the sounds would "stick" in the IVR config screen unless I removed the "Auto" name and renamed them. Once the files were named, the IVRs worked great.
Cheers,
mrguitar

scsikid

Anytime I try to uninstall the freeswitch package, it seems to hang and never uninstalls. I installed the latest version 0.6 and I think I interrupted the install. Now I cant uninstall it. I simply get the following and it just hangs there.


Removing package... 
Loading package configuration freeswitch.xml... 
Loading package instructions...

Any help would be appreciated.

cybrsrfr

@scsikid:

Anytime I try to uninstall the freeswitch package, it seems to hang and never uninstalls. I installed the latest version 0.6 and I think I interrupted the install. Now I cant uninstall it. I simply get the following and it just hangs there.
Removing package... 
Loading package configuration freeswitch.xml... 
Loading package instructions...
Any help would be appreciated.

Scroll down to the bottom of the page and see if there are any errors. If there are then please report the error.

Manual steps to remove the FreeSWITCH package run the following.

pfSense GUI -> Diagnostics -> Command -> PHP Execute

exec("killall -9 freeswitch");
unlink_if_exists("/usr/local/pkg/freeswitch.xml");
unlink_if_exists("/usr/local/pkg/freeswitch.inc");
unlink_if_exists("/usr/local/pkg/freeswitch_dialplan.xml");
unlink_if_exists("/usr/local/pkg/freeswitch_extensions.xml");
unlink_if_exists("/usr/local/pkg/freeswitch_external.xml");
unlink_if_exists("/usr/local/pkg/freeswitch_internal.xml");
unlink_if_exists("/usr/local/pkg/freeswitch_modules.xml");
unlink_if_exists("/usr/local/pkg/freeswitch_public.xml");
unlink_if_exists("/usr/local/pkg/freeswitch_vars.xml");
exec("rm -R /usr/local/freeswitch/");
exec("rm -R /usr/local/www/freeswitch/");
unlink_if_exists("/usr/local/etc/rc.d/freeswitch.sh");
unlink_if_exists("/tmp/freeswitch.tar.gz");
unlink_if_exists("/tmp/pkg_mgr_FreeSWITCH.log");

scsikid

Didnt even see that error down there.

Warning: delete_package(/usr/local/pkg/freeswitch.inc): failed to open stream: No such file or directory in /etc/inc/pkg-utils.inc on line 740 Fatal error: delete_package(): Failed opening required '/usr/local/pkg/freeswitch.inc' (include_path='.:/etc/inc:/usr/local/www:/usr/local/captiveportal:/usr/local/pkg') in /etc/inc/pkg-utils.inc on line 740

cybrsrfr

The error says that it can't find the file /usr/local/pkg/freeswitch.inc which is the include that defines the steps to uninstall the package. The FreeSWITCH package will not work if the freeswitch.inc file is missing. Without that file you will definitely need to run manually remove the package as I described in a previously.

cybrsrfr

@mrguitar:

I might have found a small bug. (sorry if this has already been discussed, I didn't want to re-read this whole thread again)

The bug had not been reported.

@mrguitar:

I uploaded a lot of recordings and setup several IVRs. I noticed that none of the sounds would "stick" in the IVR config screen unless I removed the "Auto" name and renamed them. Once the files were named, the IVRs worked great.
Cheers,
mrguitar

Actually the act of editing the recording no changes and then saving it would fix the problem. In looking into this I found another bug where the guid would change each time the edit page was saved. I have made some change that are available in 0.6.3 that should fix these problems. Please confirm that it is working now.

Anyone using IVR/Recordings is strongly encouraged to upgrade to 0.6.3 or higher.

chpalmer

Actually the act of editing the recording no changes and then saving it would fix the problem. I looking into this I found another bug where the guid would change each time the edit page was saved. I have made some change that are available in 0.6.3 that should fix these problems. Please confirm that it is working now.

Could this be a reason my recordings are unusable after upgrading packages?

Thanks for all the hard work Mcrane! ;D :)