Netgate Discussion Forum
    • Categories
    • Recent
    • Tags
    • Popular
    • Users
    • Search
    • Register
    • Login

    Multicast routing.

    Scheduled Pinned Locked Moved 2.0-RC Snapshot Feedback and Problems - RETIRED
    29 Posts 8 Posters 44.9k Views
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • T
      the6thday
      last edited by

      I'm not sure i really understand what you did to solve the error but this is my new config file (still not working and still showing the same error message):

      ########################################################
#
#   Example configuration file for the IgmpProxy
#   --------------------------------------------
#
#   The configuration file must define one upstream
#   interface, and one or more downstream interfaces.
#
#   If multicast traffic originates outside the
#   upstream subnet, the "altnet" option can be
#   used in order to define legal multicast sources.
#   (See example...)
#
#   The "quickleave" should be used to avoid saturation
#   of the upstream link. The option should only
#   be used if it's absolutely necessary to
#   accurately imitate just one Client.
#
########################################################

##------------------------------------------------------
## Enable Quickleave mode (Sends Leave instantly)
##------------------------------------------------------
quickleave

##------------------------------------------------------
## Configuration for WAN (pppoe0) (Upstream Interface)
##------------------------------------------------------
phyint pppoe0 upstream  ratelimit 0  threshold 1
       altnet 217.0.119.0/24   # T-Home Entertain
       altnet 193.158.35.0/24  # T-Home Entertain
       altnet 192.168.0.0/24   # LAN IP SUBNET

##------------------------------------------------------
## Configuration for your LAN (em0) (Downstream Interface)
##------------------------------------------------------
phyint em0 downstream  ratelimit 0  threshold 1

##------------------------------------------------------
## Configuration for anything else (Disabled Interfaces)
##------------------------------------------------------
phyint lo0 disabled
phyint em1 disabled
phyint em2 disabled
phyint ath0 disabled
phyint pfsync0 disabled
phyint enc0 disabled
phyint pflog0 disabled
      1 Reply Last reply Reply Quote 0
      • F
        FrankLaVerne
        last edited by

        After checking it with my linux router again, I have to say: What I did was effective, yet quite stupid :) I have disabled my LAN device, so it won't try to send multicast membership queries bump

        So we both are in the same situation again.

        I have read about the problem before here, where you can get quite detailed information on the subject:

        http://unix.derkeiler.com/Mailing-Lists/FreeBSD/net/2008-06/msg00344.html

        I seriously think that the line

        
Info: sendto to 224.0.0.1 on x.x.x.x; Errno(22): Invalid argument

        tells us that the membership queries are not successfully sent to it's destination. At the current moment I assume that the sendto routine that is used by *BSD is different to the Linux one, and therefore might produce a problem, though I better keep my big fat mouth shut after my assumptions made earlier ;D

        I will keep trying and will write as soon as I have news again.

        Cheers,

        Frank

        1 Reply Last reply Reply Quote 0
        • F
          FrankLaVerne
          last edited by

          Hi again,

          iirc the igmpproxy version included in the ALPHA builds is the one from the OpenBSD ports (correct me if I am wrong), which not only I seem to have a big problem with, since it's not working correctly.

          As far as I have read, there is new port for FreeBSD coming up that has been reported to have been tested:

          http://www.freebsd.org/cgi/query-pr.cgi?pr=130174

          Could anybody check this and, if possible, include this version in the ALPHA builds? I would be glad to get my hands on this one for testing, since it sounds quite promising.

          Cheers,

          Frank

          1 Reply Last reply Reply Quote 0
          • B
            buddah
            last edited by 

            
pass in on $WAN inet proto udp  to 224.0.0.0/4
pass out on $WAN inet proto igmp from $WANIP to 224.0.0.0/4 allow-opts

pass in on $LANINT inet proto igmp from $SETBOX to 224.0.0.0/4 allow-opts
pass in on $LANINT inet proto udp  from $SETBOX
pass in on $LANINT inet proto tcp  from $SETBOX

            I have searched files and found similar strings like this in /etc/inc/filter.inc but am unsure if this is the right file to plug into. Where else other than the gui can I create these rules?

            Dzieki

            1 Reply Last reply Reply Quote 0
            • E
              eri--
              last edited by

              Ok can everybody try the latest snapshot it has improvements and you can set the allow-opts option under "Advanced options" selections.
              It is presented as a checkbox.

              1 Reply Last reply Reply Quote 0
              • T
                tehryan
                last edited by

                would this work to route multicast through a vpn or am i still dreaming?

                1 Reply Last reply Reply Quote 0
                • E
                  eri--
                  last edited by

                  It should help if you have correct spd for the ipsec

                  1 Reply Last reply Reply Quote 0
                  • M
                    mino
                    last edited by

                    Hmm seems still not to work. Some explanation:

                    10.123.104.100 -> Media Receiver
                    10.123.104.0/24 -> IPTV Subnet on VLAN8

                    
# igmpproxy -d -c /var/etc/igmpproxy.conf
igmpproxy, Version 0.1 beta2, Build 090105 
Copyright 2005 by Johnny Egeland <johnny@rlo.org>Distributed under the GNU GENERAL PUBLIC LICENSE, Version 2 - check GPL.txt

Debu: Searching for config file at '/var/etc/igmpproxy.conf'
Debu: Config: Quick leave mode enabled.
Debu: Config: Got a phyint token.
Debu: Config: IF: Config for interface pppoe0.
Debu: Config: IF: Got upstream token.
Debu: Config: IF: Got ratelimit token '0'.
Debu: Config: IF: Got threshold token '1'.
Debu: Config: IF: Got altnet token 217.0.119.0/24.
Debu: Config: IF: Altnet: Parsed altnet to 217.0.119/24.
Debu: Config: IF: Got altnet token 193.158.35.0/24.
Debu: Config: IF: Altnet: Parsed altnet to 193.158.35/24.
Debu: IF name : pppoe0
Debu: Next ptr : 0
Debu: Ratelimit : 0
Debu: Threshold : 1
Debu: State : 1
Debu: Allowednet ptr : 2820c040
Debu: Config: Got a phyint token.
Debu: Config: IF: Config for interface vlan8.
Debu: Config: IF: Got downstream token.
Debu: Config: IF: Got ratelimit token '0'.
Debu: Config: IF: Got threshold token '1'.
Debu: IF name : vlan8
Debu: Next ptr : 0
Debu: Ratelimit : 0
Debu: Threshold : 1
Debu: State : 2
Debu: Allowednet ptr : 0
Debu: Config: Got a phyint token.
Debu: Config: IF: Config for interface lo0.
Debu: Config: IF: Got disabled token.
Debu: IF name : lo0
Debu: Next ptr : 0
Debu: Ratelimit : 0
Debu: Threshold : 1
Debu: State : 0
Debu: Allowednet ptr : 0
Debu: Config: Got a phyint token.
Debu: Config: IF: Config for interface vlan1.
Debu: Config: IF: Got disabled token.
Debu: IF name : vlan1
Debu: Next ptr : 0
Debu: Ratelimit : 0
Debu: Threshold : 1
Debu: State : 0
Debu: Allowednet ptr : 0
Debu: Config: Got a phyint token.
Debu: Config: IF: Config for interface vlan7.
Debu: Config: IF: Got disabled token.
Debu: IF name : vlan7
Debu: Next ptr : 0
Debu: Ratelimit : 0
Debu: Threshold : 1
Debu: State : 0
Debu: Allowednet ptr : 0
Debu: Config: Got a phyint token.
Debu: Config: IF: Config for interface vlan3.
Debu: Config: IF: Got disabled token.
Debu: IF name : vlan3
Debu: Next ptr : 0
Debu: Ratelimit : 0
Debu: Threshold : 1
Debu: State : 0
Debu: Allowednet ptr : 0
Debu: Config: Got a phyint token.
Debu: Config: IF: Config for interface vlan4.
Debu: IF name : vlan4
Debu: Next ptr : 0
Debu: Ratelimit : 0
Debu: Threshold : 1
Debu: State : 2
Debu: Allowednet ptr : 0
Debu: Adding Physical Index value of IF 'lo0' is 6
Debu: buildIfVc: Interface lo0 Addr: 127.0.0.1, Flags: 0xffff8049, Network: 127/8
Debu: Adding Physical Index value of IF 'vlan0' is 9
Debu: buildIfVc: Interface vlan0 Addr: 10.123.101.254, Flags: 0xffff8843, Network: 10.123.101/24
Debu: buildIfVc: Interface vlan0 Addr: 10.123.101.254, Flags: 0xffff8843, Network: 10.123.100.8/29
Debu: buildIfVc: Interface vlan0 Addr: 10.123.101.254, Flags: 0xffff8843, Network: 10.123.100.24/29
Debu: Adding Physical Index value of IF 'vlan2' is 11
Debu: buildIfVc: Interface vlan2 Addr: 172.20.43.136, Flags: 0xffff8843, Network: 172.20/16
Debu: Adding Physical Index value of IF 'vlan3' is 12
Debu: buildIfVc: Interface vlan3 Addr: 10.123.102.254, Flags: 0xffff8843, Network: 10.123.102/24
Debu: buildIfVc: Interface vlan3 Addr: 10.123.102.254, Flags: 0xffff8843, Network: 10.123.100.16/29
Debu: Adding Physical Index value of IF 'vlan4' is 13
Debu: buildIfVc: Interface vlan4 Addr: 10.123.104.254, Flags: 0xffff8843, Network: 10.123.104/24
Debu: Adding Physical Index value of IF 'pppoe0' is 14
Debu: buildIfVc: Interface pppoe0 Addr: 87.154.197.225, Flags: 0xffff88d1, Network: 87.154.197.225/32
Debu: Found config for vlan3
Debu: Found config for vlan4
Debu: Found config for pppoe0
Note: adding VIF, Ix 0 Fl 0x0 IP 0xfe657b0a vlan0, Threshold: 1, Ratelimit: 0
Debu:         Network for [vlan0] : 10.123.100.24/29
Debu:         Network for [vlan0] : 10.123.100.8/29
Debu:         Network for [vlan0] : 10.123.101/24
Note: adding VIF, Ix 1 Fl 0x0 IP 0x882b14ac vlan2, Threshold: 1, Ratelimit: 0
Debu:         Network for [vlan2] : 172.20/16
Note: adding VIF, Ix 2 Fl 0x0 IP 0xfe667b0a vlan3, Threshold: 1, Ratelimit: 0
Debu:         Network for [vlan3] : 10.123.100.16/29
Debu:         Network for [vlan3] : 10.123.102/24
Note: adding VIF, Ix 3 Fl 0x0 IP 0xfe687b0a vlan4, Threshold: 1, Ratelimit: 0
Debu:         Network for [vlan4] : 10.123.104/24
Note: adding VIF, Ix 4 Fl 0x0 IP 0xe1c59a57 pppoe0, Threshold: 1, Ratelimit: 0
Debu:         Network for [pppoe0] : 87.154.197.225/32
Debu:         Network for [pppoe0] : 217.0.119/24
Debu:         Network for [pppoe0] : 193.158.35/24
Debu: Got 232448 byte buffer size in 8 iterations
Debu: Joining all-routers group 224.0.0.2 on vif 10.123.101.254
Note: joinMcGroup: 224.0.0.2 on vlan0
Debu: Joining all-routers group 224.0.0.2 on vif 172.20.43.136
Note: joinMcGroup: 224.0.0.2 on vlan2
Debu: Joining all-routers group 224.0.0.2 on vif 10.123.104.254
Note: joinMcGroup: 224.0.0.2 on vlan4
Info: sendto to 224.0.0.1 on 10.123.101.254; Errno(22): Invalid argument
Debu: SENT Membership query   from 10.123.101.254  to 224.0.0.1
Debu: Sent membership query from 10.123.101.254 to 224.0.0.1\. Delay: 10
Info: sendto to 224.0.0.1 on 172.20.43.136; Errno(22): Invalid argument
Debu: SENT Membership query   from 172.20.43.136   to 224.0.0.1
Debu: Sent membership query from 172.20.43.136 to 224.0.0.1\. Delay: 10
Info: sendto to 224.0.0.1 on 10.123.104.254; Errno(22): Invalid argument
Debu: SENT Membership query   from 10.123.104.254  to 224.0.0.1
Debu: Sent membership query from 10.123.104.254 to 224.0.0.1\. Delay: 10
Debu: Created timeout 1 (#0) - delay 10 secs
Debu: (Id:1, Time:10) 
Debu: Created timeout 2 (#1) - delay 21 secs
Debu: (Id:1, Time:10) 
Debu: (Id:2, Time:21) 
Warn: received packet from 10.123.104.100 shorter (40 bytes) than hdr+data length (24+4072)
Warn: received packet from 10.123.104.100 shorter (40 bytes) than hdr+data length (24+4072)
Warn: received packet from 10.123.104.100 shorter (40 bytes) than hdr+data length (24+4072)
Debu: About to call timeout 1 (#0)
Debu: Aging routes in table.
Debu: 
Current routing table (Age active routes);
-----------------------------------------------------

Debu: No routes in table...
Debu: 
-----------------------------------------------------

Warn: received packet from 10.123.104.100 shorter (40 bytes) than hdr+data length (24+4072)
Warn: received packet from 10.123.104.100 shorter (40 bytes) than hdr+data length (24+4072)</johnny@rlo.org>

                    And here my config:

                    
##------------------------------------------------------
## Enable Quickleave mode (Sends Leave instantly)
##------------------------------------------------------
quickleave

##------------------------------------------------------
## Configuration for em0 (Upstream Interface)
##------------------------------------------------------
phyint  pppoe0  upstream  ratelimit 0  threshold 1
#       altnet 10.0.0.0/8
#       altnet 132.185.0.0/16   # BBC multicast trial
       altnet 217.0.119.0/24   # T-Home Entertain
       altnet 193.158.35.0/24  # T-Home Entertain

##------------------------------------------------------
## Configuration for ipw0 (Downstream Interface)
##------------------------------------------------------
phyint vlan8 downstream  ratelimit 0  threshold 1

##------------------------------------------------------
## Configuration for lo0 (Disabled Interface)
##------------------------------------------------------
phyint lo0 disabled
phyint vlan1 disabled
phyint vlan7 disabled
phyint vlan3 disabled
phyint vlan4 disabled

                    Running:   2.0-ALPHA-ALPHA
                    built on Mon Jan 26 03:00:33 EST 2009
                    FreeBSD 7.1-RELEASE-p2
                    IRC Nick: mino

                    1 Reply Last reply Reply Quote 0
                    • E
                      eri--
                      last edited by

                      Can you pose a packet trace with tcpdump on the interface that you are supposed to get igmp traffic with tcpdump -i $interface -s 0 proto igmp or without the traffic filter 'proto igmp'.

                      1 Reply Last reply Reply Quote 0
                      • M
                        mino
                        last edited by

                        http://www.file-upload.net/download-1408907/iptv.dump.html

                        Okay this is the dump.

                        Running:   2.0-ALPHA-ALPHA
                        built on Mon Jan 26 03:00:33 EST 2009
                        FreeBSD 7.1-RELEASE-p2
                        IRC Nick: mino

                        1 Reply Last reply Reply Quote 0
                        • E
                          eri--
                          last edited by

                          Hmm can any of you try setting the interfaces where multicast should pass in promisous mode with
                          ifconfig $interface promisc

                          and after that start the proxy?
                          If it does not work ok in the latest snapshot which have an update on igmpproxy.

                          1 Reply Last reply Reply Quote 0
                          • T
                            tehryan
                            last edited by

                            the last 2 snapshots i've tried are now missing igmpproxy

                            1 Reply Last reply Reply Quote 0
                            • E
                              eri--
                              last edited by

                              try next snapshots.

                              1 Reply Last reply Reply Quote 0
                              • E
                                eri--
                                last edited by

                                There is a GUI now for igmpproxy under Services -> IGMP proxy.

                                Please report your findings.

                                1 Reply Last reply Reply Quote 0
                                • F
                                  FrankLaVerne
                                  last edited by

                                  Hi ermal,

                                  first of all: Thanks for all the efforts so far.

                                  2.) The IGMP proxy menu looks nice, but as soon as I want to save a device's configuration (any combination whatsoever), I am redirected to a page saying something like "Page does not exist for user. Logout" - I assume that the configuration file is not written correctly? After that (when I logout), I cannot login anymore and can only reset pfSense to factory settings. So to anyone who wants to test it: Please be aware that your configuration file might be destroyed.

                                  If I can help regarding this matter, please instruct what I should do.

                                  3.) I assume that you have included the FreeBSD patched version if igmpproxy? I have included it in an older ALPHA myself by patching and compiling it on another machine and have transferred it to the pfSense machine. Actually, using the new version manually (due to the webConfig flaw), I have encountered that the ErrNo(22) FINALLY is gone - also with the version that is included in the latest ALPHAs.

                                  So far, so good - igmpproxy seems to work perfect on first sight, though igmpproxy does not report any connection tries from the T-Entertain SetTopBox via IGMP. To be brief: My SetTopBox behaves as if igmpproxy is not running and freezes after 10 seconds of any program start / change.

                                  What I did try then was your hint regarding the promisc mode.

                                  I finally seemed to have succeeded, because the SetTopBox was trying to connect, but still the picture freezed. When I was checking in debug mode, I found the following debugging message which seemed to be suspicious:

                                  "Eliminate compiler warning for field type = 22"

                                  22 …? Sounds familiar ...

                                  Any ideas of what I could do or how I could help to trace the possible error?

                                  Cheers,

                                  Frank

                                  1 Reply Last reply Reply Quote 0
                                  • E
                                    eri--
                                    last edited by

                                    Well if you see even a message like
                                    "Should insert group %s (from: %s) to route table. Vif Ix : %d" before that message than everything should be ok AFAIK.

                                    Even a traffic capture on the lan(downstream) side to know if the group is joined correctly and some traffic is passing should help.

                                    Check you have the allow-opts as is needed on the rules and if you need to permit any other traffic for the service to work.

                                    For the GUI should be ok on next snapshot i forgot to merge something for the parser.

                                    1 Reply Last reply Reply Quote 0
                                    • T
                                      the6thday
                                      last edited by

                                      hi,

                                      i'm back to using pfsense and I noticed that now there is a igmpproxy package for 1.2.2 & .3rcX, I assume that the package is based on this thread…

                                      So could somebody please look into this: http://forum.pfsense.org/index.php/topic,16943.0.html

                                      1 Reply Last reply Reply Quote 0
                                      • B
                                        buddah
                                        last edited by

                                        I got igmp working by correctly adding rules, and correctly assigning interfaces.

                                        1. You want to first set up the interfaces.

                                        a) Your upstream interface will be the origin of the multicast packets. (in my case it was a fuppes server on a different network)

                                        Interface - LAN
                                              Description - "upstream" (or whatever you want)
                                              Type - Upstream Interface
                                              Network - 192.168.0.0      CIDR - 24

                                        b) Your downstream interface will be the destination or what is asking for multicast packets. (in my case it was the wireless where my ps3 was on)

                                        Interface - WLAN
                                              Description - "downstream" (or whatever you want)
                                              Type - Downstream Interface
                                              Network - 192.168.1.0      CIDR - 24

                                        1. The rules can get a little tricky. Leave anything not specified blank or at its default setting. Lets start with the upstream interface (LAN).

                                        a) Create a new rule for the IGMP packets on the upstream interface (LAN)

                                        Action - Pass
                                              Interface - LAN
                                              Protocol - IGMP
                                              Source -
                                                Type: Single host or alias
                                                Address: 192.168.0.32 (my fuppes/multicast server)
                                              Destination -
                                                Type: Network
                                                Address: 224.0.0.0 / 4 (multicast)
                                              Advanced Options -
                                                Check the box for allowing packets to pass, leave the fields blank
                                              Description - "Multicast IGMP" (or anything you want)

                                        b) Create a second rule for the UDP packets on the upstream interface (LAN)

                                        Action - Pass
                                              Interface - LAN
                                              Protocol - UDP
                                              Source -
                                                Type: any
                                              Destination -
                                                Type: Network
                                                Address: 224.0.0.0 / 4 (multicast)
                                              Description - "Multicast UDP" (or anything you want)

                                        1. Now we setup rules for the downstream interface (WLAN). Also leave anything not specified blank or at its default setting.

                                        a) Create a new rule for the IGMP packets on the downstream interface (WLAN)

                                        Action - Pass
                                              Interface - WLAN
                                              Protocol - IGMP
                                              Source -
                                                Type: Single host or alias
                                                Address: 192.168.1.75 (ps3)
                                              Destination -
                                                Type - any
                                              Advanced Options -
                                                Check the box for allowing packets to pass, leave the fields blank
                                              Description - "ps3 Multicast UDP" (or anything you want)

                                        b) Create a second rule for the UDP packets on the downstream interface (WLAN)

                                        Action - Pass
                                              Interface - WLAN
                                              Protocol - UDP
                                              Source -
                                                Type: Single host or alias
                                                Address: 192.168.1.75 (ps3)
                                              Destination -
                                                Type: any
                                              Description - "ps3 Multicast UDP" (or anything you want)

                                        c) Create a third rule for the TCP packets on the downstream interface (WLAN)

                                        Action - Pass
                                              Interface - WLAN
                                              Protocol - TCP
                                              Source -
                                                Type: Single host or alias
                                                Address: 192.168.1.75 (ps3)
                                              Destination -
                                                Type: any
                                              Description - "ps3 Multicast TCP" (or anything you want)

                                        That's how I got multicast to work on my network. I am not sure if creating the rules for UDP and TCP packets are completely necessary, or if this may cause any security risks yet. Maybe someone can read this and further tweak the settings.
                                        Good luck!  ;)

                                        buddah

                                        1 Reply Last reply Reply Quote 0
                                        • T
                                          the6thday
                                          last edited by

                                          Well its not working here (using 1.2.3-RC2 built on Thu Jul 23 17:25:52 EDT 2009)

                                          /tmp/igmpproxy.conf(as created by the gui):

                                          
##------------------------------------------------------
## Enable Quickleave mode (Sends Leave instantly)
##------------------------------------------------------
quickleave
phyint ng0 upstream ratelimit 0 threshold 1
altnet 239.35.0.0/16
altnet 217.0.119.0/24
altnet 193.158.35.0/24

phyint em0 downstream ratelimit 0 threshold 1
altnet 192.168.0.0/24

                                          rules on wan interface (upstream):

                                          rules on lan interface (downstream):

                                          Advanced Options-> Checkbox is enabled and fields are blank on all rules.

                                          Debug output from igmpproxy:

                                          
# igmpproxy -d -c /tmp/igmpproxy.conf
igmpproxy, Version 0.1 beta2, Build 090427
Copyright 2005 by Johnny Egeland <johnny@rlo.org>Distributed under the GNU GENERAL PUBLIC LICENSE, Version 2 - check GPL.txt

Debu: Searching for config file at '/tmp/igmpproxy.conf'
Debu: Config: Quick leave mode enabled.
Debu: Config: Got a phyint token.
Debu: Config: IF: Config for interface ng0.
Debu: Config: IF: Got upstream token.
Debu: Config: IF: Got ratelimit token '0'.
Debu: Config: IF: Got threshold token '1'.
Debu: Config: IF: Got altnet token 239.35.0.0/16.
Debu: Config: IF: Altnet: Parsed altnet to 239.35/16.
Debu: Config: IF: Got altnet token 217.0.119.0/24.
Debu: Config: IF: Altnet: Parsed altnet to 217.0.119/24.
Debu: Config: IF: Got altnet token 193.158.35.0/24.
Debu: Config: IF: Altnet: Parsed altnet to 193.158.35/24.
Debu: IF name : ng0
Debu: Next ptr : 0
Debu: Ratelimit : 0
Debu: Threshold : 1
Debu: State : 1
Debu: Allowednet ptr : 2820c030
Debu: Config: Got a phyint token.
Debu: Config: IF: Config for interface em0.
Debu: Config: IF: Got downstream token.
Debu: Config: IF: Got ratelimit token '0'.
Debu: Config: IF: Got threshold token '1'.
Debu: Config: IF: Got altnet token 192.168.0.0/24.
Debu: Config: IF: Altnet: Parsed altnet to 192.168.0/24.
Debu: IF name : em0
Debu: Next ptr : 0
Debu: Ratelimit : 0
Debu: Threshold : 1
Debu: State : 2
Debu: Allowednet ptr : 2820c060
Debu: Adding Physical Index value of IF 'em0' is 1
Debu: buildIfVc: Interface em0 Addr: 192.168.0.10, Flags: 0xffff8843, Network: 192.168.0/24
Debu: Adding Physical Index value of IF 'lo0' is 8
Debu: buildIfVc: Interface lo0 Addr: 127.0.0.1, Flags: 0xffff8049, Network: 127/8
Debu: Adding Physical Index value of IF 'ng0' is 10
Debu: buildIfVc: Interface ng0 Addr: 79.238.127.78, Flags: 0xffff88d1, Network: 79.238.127.78/32
Debu: Found config for em0
Debu: Found config for ng0
Note: adding VIF, Ix 0 Fl 0x0 IP 0x0a00a8c0 em0, Threshold: 1, Ratelimit: 0
Debu:         Network for [em0] : 192.168.0/24
Debu:         Network for [em0] : 192.168.0/24
Note: adding VIF, Ix 1 Fl 0x0 IP 0x4e7fee4f ng0, Threshold: 1, Ratelimit: 0
Debu:         Network for [ng0] : 79.238.127.78/32
Debu:         Network for [ng0] : 239.35/16
Debu:         Network for [ng0] : 217.0.119/24
Debu:         Network for [ng0] : 193.158.35/24
Debu: Got 262144 byte buffer size in 0 iterations
Debu: Joining all-routers group 224.0.0.2 on vif 192.168.0.10
Note: joinMcGroup: 224.0.0.2 on em0
Debu: SENT Membership query   from 192.168.0.10    to 224.0.0.1
Debu: Sent membership query from 192.168.0.10 to 224.0.0.1\. Delay: 10
Debu: Created timeout 1 (#0) - delay 10 secs
Debu: (Id:1, Time:10)
Debu: Created timeout 2 (#1) - delay 21 secs
Debu: (Id:1, Time:10)
Debu: (Id:2, Time:21)
Debu: Packet from 192.168.0.10: proto: 2 hdrlen: 24 iplen: 8 or 2048
Note: RECV V2 member report   from 192.168.0.10    to 224.0.0.2 (ip_hl 24, data 8)
Note: The IGMP message was from myself. Ignoring.
Debu: Packet from 192.168.0.10: proto: 2 hdrlen: 20 iplen: 8 or 2048
Note: RECV Membership query   from 192.168.0.10    to 224.0.0.1 (ip_hl 20, data 8)
Debu: Packet from 192.168.0.1: proto: 2 hdrlen: 24 iplen: 8 or 2048
Note: RECV V2 member report   from 192.168.0.1     to 239.255.255.250 (ip_hl 24, data 8)
Debu: Should insert group 239.255.255.250 (from: 192.168.0.1) to route table. Vif Ix : 0
Debu: No existing route for 239.255.255.250\. Create new.
Debu: No routes in table. Insert at beginning.
Info: Inserted route table entry for 239.255.255.250 on VIF #0
Debu: Joining group 239.255.255.250 upstream on IF address 79.238.127.78
Note: joinMcGroup: 239.255.255.250 on ng0
Debu:
Current routing table (Insert Route);
-----------------------------------------------------

Debu: #0: Dst: 239.255.255.250, Age:2, St: I, OutVifs: 0x00000001
Debu:
-----------------------------------------------------

Debu: Eliminate compiler warning for field type = 22
Debu: Packet from 79.238.127.78: proto: 2 hdrlen: 24 iplen: 8 or 2048
Note: RECV V2 member report   from 79.238.127.78   to 239.255.255.250 (ip_hl 24, data 8)
Note: The IGMP message was from myself. Ignoring.
Debu: Packet from 192.168.0.2: proto: 2 hdrlen: 24 iplen: 8 or 2048
Note: RECV V2 member report   from 192.168.0.2     to 239.35.129.11 (ip_hl 24, data 8)
Debu: Should insert group 239.35.129.11 (from: 192.168.0.2) to route table. Vif Ix : 0
Debu: No existing route for 239.35.129.11\. Create new.
Debu: Found existing routes. Find insert location.
Debu: Inserting at beginning, before route 239.255.255.250
Info: Inserted route table entry for 239.35.129.11 on VIF #0
Debu: Joining group 239.35.129.11 upstream on IF address 79.238.127.78
Note: joinMcGroup: 239.35.129.11 on ng0
Debu:
Current routing table (Insert Route);
-----------------------------------------------------

Debu: #0: Dst: 239.35.129.11, Age:2, St: I, OutVifs: 0x00000001
Debu: #1: Dst: 239.255.255.250, Age:2, St: I, OutVifs: 0x00000001
Debu:
-----------------------------------------------------

Debu: Eliminate compiler warning for field type = 22
Debu: Packet from 79.238.127.78: proto: 2 hdrlen: 24 iplen: 8 or 2048
Note: RECV V2 member report   from 79.238.127.78   to 239.35.129.11 (ip_hl 24, data 8)
Note: The IGMP message was from myself. Ignoring.
Debu: Packet from 192.168.0.2: proto: 2 hdrlen: 24 iplen: 8 or 2048
Note: RECV V2 member report   from 192.168.0.2     to 239.35.129.11 (ip_hl 24, data 8)
Debu: Should insert group 239.35.129.11 (from: 192.168.0.2) to route table. Vif Ix : 0
Info: Updated route entry for 239.35.129.11 on VIF #0
Debu:
Current routing table (Insert Route);
-----------------------------------------------------

Debu: #0: Dst: 239.35.129.11, Age:2, St: I, OutVifs: 0x00000001
Debu: #1: Dst: 239.255.255.250, Age:2, St: I, OutVifs: 0x00000001
Debu:
-----------------------------------------------------

Debu: Eliminate compiler warning for field type = 22
Debu: Packet from 192.168.0.2: proto: 2 hdrlen: 24 iplen: 8 or 2048
Note: RECV V2 member report   from 192.168.0.2     to 224.0.0.251 (ip_hl 24, data 8)
Debu: Should insert group 224.0.0.251 (from: 192.168.0.2) to route table. Vif Ix : 0
Debu: No existing route for 224.0.0.251\. Create new.
Debu: Found existing routes. Find insert location.
Debu: Inserting after route 239.255.255.250
Info: Inserted route table entry for 224.0.0.251 on VIF #0
Debu: Joining group 224.0.0.251 upstream on IF address 79.238.127.78
Note: joinMcGroup: 224.0.0.251 on ng0
Debu:
Current routing table (Insert Route);
-----------------------------------------------------

Debu: #0: Dst: 239.35.129.11, Age:2, St: I, OutVifs: 0x00000001
Debu: #1: Dst: 239.255.255.250, Age:2, St: I, OutVifs: 0x00000001
Debu: #2: Dst: 224.0.0.251, Age:2, St: I, OutVifs: 0x00000001
Debu:
-----------------------------------------------------

Debu: Eliminate compiler warning for field type = 22
Debu: Packet from 79.238.127.78: proto: 2 hdrlen: 24 iplen: 8 or 2048
Note: RECV V2 member report   from 79.238.127.78   to 224.0.0.251 (ip_hl 24, data 8)
Note: The IGMP message was from myself. Ignoring.
Debu: Packet from 79.238.127.78: proto: 2 hdrlen: 24 iplen: 8 or 2048
Note: RECV V2 member report   from 79.238.127.78   to 239.35.129.11 (ip_hl 24, data 8)
Note: The IGMP message was from myself. Ignoring.
Debu: Packet from 192.168.0.10: proto: 2 hdrlen: 24 iplen: 8 or 2048
Note: RECV V2 member report   from 192.168.0.10    to 224.0.0.2 (ip_hl 24, data 8)
Note: The IGMP message was from myself. Ignoring.
Debu: Packet from 192.168.0.2: proto: 2 hdrlen: 24 iplen: 8 or 2048
Note: RECV Leave message      from 192.168.0.2     to 224.0.0.2 (ip_hl 24, data 8)
Debu: Got leave message from 192.168.0.2 to 239.35.129.11\. Starting last member detection.
Debu: Leaving group 239.35.129.11 upstream on IF address 79.238.127.78
Note: leaveMcGroup: 239.35.129.11 on ng0
Debu: SENT Membership query   from 192.168.0.10    to 239.35.129.11
Debu: Sent membership query from 192.168.0.10 to 239.35.129.11\. Delay: 10
Debu: Created timeout 3 (#1) - delay 8 secs
Debu: (Id:1, Time:2)
Debu: (Id:3, Time:8)
Debu: (Id:2, Time:13)
Debu: Packet from 192.168.0.2: proto: 2 hdrlen: 24 iplen: 8 or 2048
Note: RECV V2 member report   from 192.168.0.2     to 239.35.140.11 (ip_hl 24, data 8)
Debu: Should insert group 239.35.140.11 (from: 192.168.0.2) to route table. Vif Ix : 0
Debu: No existing route for 239.35.140.11\. Create new.
Debu: Found existing routes. Find insert location.
Debu: Inserting after route 239.35.129.11
Info: Inserted route table entry for 239.35.140.11 on VIF #0
Debu: Joining group 239.35.140.11 upstream on IF address 79.238.127.78
Note: joinMcGroup: 239.35.140.11 on ng0
Debu:
Current routing table (Insert Route);
-----------------------------------------------------

Debu: #0: Dst: 239.35.129.11, Age:2, St: I, OutVifs: 0x00000001
Debu: #1: Dst: 239.35.140.11, Age:2, St: I, OutVifs: 0x00000001
Debu: #2: Dst: 239.255.255.250, Age:2, St: I, OutVifs: 0x00000001
Debu: #3: Dst: 224.0.0.251, Age:2, St: I, OutVifs: 0x00000001
Debu:
-----------------------------------------------------

Debu: Eliminate compiler warning for field type = 22
Debu: Packet from 79.238.127.78: proto: 2 hdrlen: 24 iplen: 8 or 2048
Note: RECV V2 member report   from 79.238.127.78   to 239.35.140.11 (ip_hl 24, data 8)
Note: The IGMP message was from myself. Ignoring.
Debu: Packet from 192.168.0.2: proto: 2 hdrlen: 24 iplen: 8 or 2048
Note: RECV V2 member report   from 192.168.0.2     to 239.35.140.11 (ip_hl 24, data 8)
Debu: Should insert group 239.35.140.11 (from: 192.168.0.2) to route table. Vif Ix : 0
Info: Updated route entry for 239.35.140.11 on VIF #0
Debu:
Current routing table (Insert Route);
-----------------------------------------------------

Debu: #0: Dst: 239.35.129.11, Age:2, St: I, OutVifs: 0x00000001
Debu: #1: Dst: 239.35.140.11, Age:2, St: I, OutVifs: 0x00000001
Debu: #2: Dst: 239.255.255.250, Age:2, St: I, OutVifs: 0x00000001
Debu: #3: Dst: 224.0.0.251, Age:2, St: I, OutVifs: 0x00000001
Debu:
-----------------------------------------------------

Debu: Eliminate compiler warning for field type = 22
Debu: Packet from 79.238.127.78: proto: 2 hdrlen: 24 iplen: 8 or 2048
Note: RECV V2 member report   from 79.238.127.78   to 239.255.255.250 (ip_hl 24, data 8)
Note: The IGMP message was from myself. Ignoring.
Debu: About to call timeout 1 (#0)
Debu: Aging routes in table.
Debu:
Current routing table (Age active routes);
-----------------------------------------------------

Debu: #0: Dst: 239.35.129.11, Age:2, St: I, OutVifs: 0x00000001
Debu: #1: Dst: 239.35.140.11, Age:2, St: I, OutVifs: 0x00000001
Debu: #2: Dst: 239.255.255.250, Age:1, St: I, OutVifs: 0x00000001
Debu: #3: Dst: 224.0.0.251, Age:1, St: I, OutVifs: 0x00000001
Debu:
-----------------------------------------------------

Debu: Packet from 79.238.127.78: proto: 2 hdrlen: 24 iplen: 8 or 2048
Note: RECV V2 member report   from 79.238.127.78   to 224.0.0.251 (ip_hl 24, data 8)
Note: The IGMP message was from myself. Ignoring.
Debu: Packet from 217.0.119.33: proto: 2 hdrlen: 24 iplen: 12 or 3072
Note: RECV Membership query   from 217.0.119.33    to 224.0.0.1 (ip_hl 24, data 12)
Debu: Packet from 79.238.127.78: proto: 2 hdrlen: 24 iplen: 8 or 2048
Note: RECV V2 member report   from 79.238.127.78   to 224.0.0.251 (ip_hl 24, data 8)
Note: The IGMP message was from myself. Ignoring.
Debu: Packet from 79.238.127.78: proto: 2 hdrlen: 24 iplen: 8 or 2048
Note: RECV V2 member report   from 79.238.127.78   to 239.255.255.250 (ip_hl 24, data 8)
Note: The IGMP message was from myself. Ignoring.
^CWarn: select() failure; Errno(4): Interrupted system call
Note: Got a interupt signal. Exiting.
Debu: clean handler called
Debu: Removing route entry for 239.35.129.11
Note: Route is not active. No kernel updates done.
Debu: Leaving group 239.35.129.11 upstream on IF address 79.238.127.78
Note: leaveMcGroup: 239.35.129.11 on ng0
Warn: MRT_DROP_MEMBERSHIP failed; Errno(49): Can't assign requested address
Debu: Removing route entry for 239.35.140.11
Note: Route is not active. No kernel updates done.
Debu: Leaving group 239.35.140.11 upstream on IF address 79.238.127.78
Note: leaveMcGroup: 239.35.140.11 on ng0
Debu: Removing route entry for 239.255.255.250
Note: Route is not active. No kernel updates done.
Debu: Leaving group 239.255.255.250 upstream on IF address 79.238.127.78
Note: leaveMcGroup: 239.255.255.250 on ng0
Debu: Removing route entry for 224.0.0.251
Note: Route is not active. No kernel updates done.
Debu: Leaving group 224.0.0.251 upstream on IF address 79.238.127.78
Note: leaveMcGroup: 224.0.0.251 on ng0
Note: All routes removed. Routing table is empty.
Info: Shutdown complete....
#</johnny@rlo.org>
                                          1 Reply Last reply Reply Quote 0
                                          • First post
                                            Last post
                                          Copyright 2025 Rubicon Communications LLC (Netgate). All rights reserved.