Qwanacks again….
-
Sorry for posting again on this. I've run the shape wizard with the following setup:
pfsense 1.2.2
1 wan
1 lan
lan connects to switch that serves 5 ap
dhcp enabled
all ap have static ip
up:500 mbits
down:11000 mbitsthis is just to serve internet
In traffic shapper, I've enabled p2pcatch all. traffic for p2p 100/up, 1000/down.
http/s, dns and icmp is high priority. pop/smtp/imap default. Everything else low.
My problem are my drops in qwanacks
34000+ in 10 hours. Is this normal? can you help? I've searched the foruns and tryed several solutions.
-
With traffic shaping enable expect to see drops. Some traffic gets dropped for higher priority. Now if you are experiencing problems then it might be a different story.
-
No problems. Just concerned about the drops. Just wanted to know if that was important.
-
That's good. To put it best you will see some drops with traffic shaping, but a lot could be a problem.
I was looking at http://forum.pfsense.org/index.php/topic,14485.0.htmlMake sure you set your up and download right.