Netgate Discussion Forum
    • Categories
    • Recent
    • Tags
    • Popular
    • Users
    • Search
    • Register
    • Login

    [SOLVED] Certain Websites won't load when connecting behind Pfsense

    Scheduled Pinned Locked Moved Off-Topic & Non-Support Discussion
    3 Posts 2 Posters 5.0k Views
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • S
      saintsjd
      last edited by

      I have DSL internet connection going into my Pfsense network gateway (DNS, DHCP, NAT etc).

      The following websites will not load when I try to connect from behind Pfsense:
      http://schemas.xmlsoap.org/soap/encoding/
      http://www.drupal.org
      http://api.drupal.org
      http://www.dailycamera.com

      If I remove Pfsense from the network, and connect directly though the modem, the sites all load fine.

      Any ideas on what could be wrong or where I should start looking in Pfsense to debug?

      I have a fairly default install of pfsense running. I do not have traffic shaping enabled, just NAT.

      Thanks
      Jon

      1 Reply Last reply Reply Quote 0
      • S
        saintsjd
        last edited by

        I found the problem is actually a Firware bug in the Actiontech M1000 Qwest DSL Modem. Here is what fixed the problem for me:

        1. Disable the DMZ setup for my PFsense computer in the DSL modem's advanced configuration
        2. Click the firewall settings… make sure everything is set to default... if so, do not change anything... click apply.

        After these steps all websites are accessible through my Pfsense gateway connected to the Qwest DSL modem.

        1 Reply Last reply Reply Quote 0
        • X
          XIII
          last edited by

          you need to change from ppoa to ppoe in the modem OR enable bridging and have pf be the router.

          Qwest tech had me do the ppoa -> ppoe and it worked, i then enabled bridging and have been problem free ever since.

          its not just the sites you listed, it varies, mine were opendns and frys electronics, to name a few, qwest says its glitch that happens sometimes….

          -Chris Stutzman
          Sys0:2.0.1: AMD Sempron 140 @2.7 1024M RAM 100GHD
          Sys1:2.0.1: Intel P4 @2.66 1024M RAM 40GHD
          freedns.afraid.org - Free DNS dynamic DNS subdomain and domain hosting.
          Check out the pfSense Wiki

          1 Reply Last reply Reply Quote 0
          • First post
            Last post
          Copyright 2025 Rubicon Communications LLC (Netgate). All rights reserved.