Squid Startup Error with PPTP

tommyboy180

I to am having the same exact issue.

Edit: I had to comment out the pptpd rules in squid.inc to get it working.

/* Handle PPTP case */
/*		if($config['pptpd']['mode'] != "off") {
			$rules .= "rdr on \$pptp proto tcp from any to !(\$pptp) port 80 -> 127.0.0.1 port 80\n";
		}	
*/	
		$rules .= "\n";
		break;
	case 'filter':
		foreach ($ifaces as $iface){
			$rules .= "# Setup squid pass rules for proxy\n";
			$rules .= "pass in quick on $iface proto tcp from any to !($iface) port 80 flags S/SA keep state\n";
			$rules .= "pass in quick on $iface proto tcp from any to !($iface) port $port flags S/SA keep state\n";
			$rules .= "\n";
		};
		if($config['pppoe']['mode'] == "off") {
			$rules .= "pass in quick on \$pppoe proto tcp from any to !(\$pppoe) port $port flags S/SA keep state\n";			
		}			
/*		if($config['pptpd']['mode'] != "off") {
			$rules .= "pass in quick on \$pptp proto tcp from any to !(\$pptp) port $port flags S/SA keep state\n";
		}	
*/		
		break;
	default:
		break;
	}

	return $rules;
}
?>

trendchiller

well, yes !
i'm just wondering about and found the error…
perhaps you could test if it works if you put this as pptpd:

		if($config['pptpd']['mode'] == "server") {
			$rules .= "rdr on \$pptp proto tcp from any to !(\$pptp) port 80 -> 127.0.0.1 port 80\n";
		}

would you please tell me after this ?

wonslung

this doesn't work for me, filter errors again
There were error(s) loading the rules: /tmp/rules.debug:345: macro 'pptp' not defined/tmp/rules.debug:345: syntax error pfctl: Syntax error in config file: pf rules not loaded - The line in question reads [345]: pass in quick on $pptp proto tcp from any to !($pptp) port 3128 flags S/SA keep state…

This page will automatically refresh every 3 seconds until the filter is done reloading.

trendchiller

could you please paste your pptpd portion without any private data of your config.xml ? or pm me ?

Diagnostics > Edit File > /conf/config.xml > Load > search for pptpd and then everything between <pptpd>and</pptpd> ?

thanks…

cisco31

trendchiller

ok, same problem here… sometimes there seems to be some pptp-mode string missing...

which pfsense version are you using ?

cisco31

1.2.2
built on Thu Jan 8 22:39:31 EST 2009

wonslung

i don't even USE pptp and i'm getting this frustrating error

psychosematic

I had pptp in use … not active at the moment of upgrade to squid. I am as well getting the same error.

trendchiller

very strange… same version here and no problem...

but please have a further try now... reinstall squid-gui components please

acidrop

Hello

I have the same problem after installing the latest squid.
I'm using Pfsense 1.2 final dual WAN with squid+squidguard+lightsquid in transparent mode.
If i disable transparent mode i don't get the error message.
I removed all the packages and installed them again but the error appears again..

Any ideas?

trendchiller

i temporarily disabled the pptp usage in squid, so update your xml-config and it should work… please let me know...

wonslung

still get this error that i never got before

Generating RRD graphs...
ERROR: unknown DS name 'qPenaltyUp'
done.

and this one

Warning: Invalid argument supplied for foreach() in /etc/inc/pkg-utils.inc(303) : eval()'d code on line 1
 squid