SIPorxd - 7 VOIP cisco 7960 - States -
-
When I look at the Diagnostics : States section I see that all the IP addresses of VOIP Cisco 7960 are connecting to the external Public IP address of the service provider to port UDP 5060, but only one of the has a connection type MULTIPLE:MULTIPLE
SIProxyd is on
LAN
WAN
5060
Enabled
RTP min 10000
RTP Max 20000My out bound NAT is automatic and the following are the states with 3 phones plugged in [ same with all phone is ]
udp 71.23.154.3:5060 <- 192.168.132.148:5060 MULTIPLE:MULTIPLE
udp 192.168.25.148:5060 -> 71.23.154.3:5060 -> 71.23.155.9:5060 MULTIPLE:MULTIPLEudp 71.23.155.9:5060 <- 192.168.25.142:5060 NO_TRAFFIC:SINGLE
udp 192.168.25.142:5060 -> 71.23.155.9:5060 SINGLE:NO_TRAFFICudp 71.23.155.9:5060 <- 192.168.25.244:5060 NO_TRAFFIC:SINGLE
udp 192.168.25.244:5060 -> 71.23.155.9:506 SINGLE:NO_TRAFFICIt seems that only one phone is sending back the correct singal wich is Multiple:multiple
Is the Outbound Nating affecting this process ? I thought that is what the SIPProxd Server does no ?
-
Ok so I solved the issue,
It seems that at least for this office configuration changing the Outbound NAT to Manual solves the issue ….
Pfsense 1.2.2 will create the default automatic NAT and that will be a great starting point ...