Heavy CPU load?

Burken

My ISP gives me 10Mbit/s for every IP we use.
Max 5 IP-addresses

Thats why i use five NIC's to get my five IPs.

So with one IP 10Mbit/s with two 20Mbit/s.. and five 50Mbit/s

Okay?

My ISP will never give me static IPs
Always DHCP…

here is how it works:

em0/LAN Static 192.168.1.111. And runs DHCP Server for LAN clients.
em1/WAN Dynamic DHCP Client
em2/WAN1 Dynamic DHCP Client
em3/WAN2 Dynamic DHCP Client
em4/WAN3 Dynamic DHCP Client
em5/WAN4 Dynamic DHCP Client

If i do killall dhclient

My CPU usage get low. But pfsens stop working after a while.....

So what is wrong ?:(

Okay... kill dhclinet works... but the firewall dies so i have to restart it after a while....

chpalmer

All your ports share the same switch?

Ive never had good luck when I had two dhcp servers (your pfsense lan and your isp's modem) on the same switch…

Can you move your lan to another switch to rule that possible issue out?

Burken

I use VLANs.
So its physically one switch but inside they are different.

You can read about it here: http://en.wikipedia.org/wiki/VLAN

chpalmer

I know what you are trying to do so I guess Ill ask outright…

Have you ruled out a misconfiguration on your switch as the root cause of your problem?

What else have you tried in your troubleshooting process?

Start with the basics and add one element at a time until you can reproduce the result.

Your setup while innovative is not typical.

Good Luck!

Burken

There is nothing wrong with the Switch. As you can se here the Vlan settings is so simple.

You guys just helpt me to see that it is wrong with the dhclient.

what is wrong with my setup thats makes it non typical?

What else can i do to troubleshoot? i have killd dhclient and everyhing works fine..

Cry Havok

Most people either have:

Multiple interfaces, connecting to different ISPs
Multiple static IPs (possibly with one dynamic), on a single interface

It's very uncommon to have a single ISP, with multiple dynamic IPs across the same subnet on multiple interfaces, particularly using a single VLAN capable switch to separate WAN(s) and LAN.

Burken

I have tested with a second GS724T so VLAN works. Thats not the problem..

No1 else have problem with dhclient CPU usage?

Eugene

I am afraid your problem is network design. Everything esle is the result of this problem.

wallabybob

I'm trying to understand your configuration rather better because I also think its unusual. I take it you have 5 "WAN" interfaces from your ISP purely to get additional bandwidth.

From what you have displayed about your switch it looks as if you MIGHT be purely using its "VLAN" capability to segment the ports so as to isolate one group of ports ("LAN") from another group of ports ("WAN"). Correct?

Apparently 6 of the 24 switch ports are in the "WAN" LAN. Of those 6 ports 5 go to pfSense interfaces em1 through em5. From your network diagram your sixth port goes to your ISP but what does it actually connect to? Is there is a web page (in English) describing it or holding a pointer to a downloadable manual or datasheet? I'm guessing that its something that will allow up to 5 systems to connect to it, each able DHCP request an address and that these addresses are all on the same IP subnet. I've not come across anything like this that would assign additional bandwidth on the WAN (Internet) side with each additional IP address assigned. If we can find out a bit more about the equipment that connects you to the ISP we may be able to help solve your configuration problem.

The fact that you have 5 pfSense interfaces on the same LAN is a configuration error unless they are bridged. (Each interface should be on its own distinct IP subnet.) And why would you bridge them in pfSense when they are connected to a switch?

Burken

Eugene:
what is wrong with my network design then? im open for change. U just want my 50mbit and not 10mbit. thats the reason i installed pfsense.

wallabybob:
One of the biggest ISP's in sweden gives homes Fibre to the house and after that
one RJ45 contact in the wall. We get five public IP's. The download speed is 100Mbit. The upload speed is limited to 10Mbit for every IP we get. The advertised is "100/10". The reason we are geting 10Mbit/IP is just poor restrictions from there side.

And yes. 6 ports are "WAN" u can call them "WANswitch" and the other one "LANswitch" the 2 VLANS never get in contact. Everyting has to through pfsense.

The sixth port is from the RJ45 Connector in the wall.

The reason im using this network design is i got help to. I asked here and got told that i can't make virtual interfaces in freebsd. If i use virtualization i can bridge them easy and get new MAC for every virtual NIC.. But in this case we come up to the conclusion that we cudent make virtual NIC's.

My ISP don't like to say whats behind the walls… im using:
www.bredbandsbolaget.se
They doesn't even have a webpage en english.. but if there is something you guys need to know. I will be happy to call them and ask.

WAN (em1)

IP address  	85.226.121.133  
Subnet mask 255.255.248.0
Gateway 85.226.120.1 

ISP DNS servers  
195.54.122.199
81.26.227.3
195.54.122.204
81.26.228.3

WAN1 (em2)
IP address  	 85.226.122.10  
Subnet mask 	255.255.248.0
Gateway 	85.226.120.1 

WAN2 (em3)
IP address  	 85.226.122.11  
Subnet mask 	255.255.248.0
Gateway 	85.226.120.1 

WAN3 (em4)

IP address  	 85.226.122.20  
Subnet mask 	255.255.248.0
Gateway 	85.226.120.1 

WAN4 (em5)

IP address  	 85.226.122.23  
Subnet mask 	255.255.248.0
Gateway 	85.226.120.1

All ips are in the same subnet.

I can undertstand that you guys dont like vlans. So here is without VLAN configurations:

Still looks stupid and unusual? :(

Perry

Hmm to make load balancing work you have to have different gateways on wan's , do you have that?

If not I wonder if a esxi server could be used so no additional hardware would be needed.

Burken

Cry Havok

Do you have to be actively uploading from all 5 IPs? Can you simply have them allocated to you, or does there have to be a device using those IPs?

The simple I can see are:

Have the IPs allocated, don't use them
Allocate 4 of them to another device that you don't use
Insert simple firewall/routers between pfSense and the Internet connection, each with a different LAN subnet

As for what is wrong with your design:
@wallabybob:

The fact that you have 5 pfSense interfaces on the same LAN is a configuration error unless they are bridged. (Each interface should be on its own distinct IP subnet.) And why would you bridge them in pfSense when they are connected to a switch?

Burken

I can remove four of the uplinks… Then only use one WAN...
then i can check if dhclient still uses that much CPU?

Eugene

I am sorry probably I am stupid but I still can not understand.
Your provider gives you one RJ-45 cable and 5 public IPs belonging to the same subnet. It allows you to download at 100Mb/s and upload with 20Mb/s per IP. And (what is most interesting) you have to acquire all 5 public IPs through DHCP.
Please tell me that I am wrong.
If everything above is correct I am afraid you can not use all 5 IPs without having 5 routers.
I would ask provider to provide me with 1 public IP and allow me to upload at 100 Mb/s paying the same price as you do now for 5 IPs.

PS: we love VLANs!

blewis

I must agree that the provider is giving you such high bandwidth w/ such a setup is to prevent people from aggregating the bandwidth. You can use separate gateways for each wan. Several years ago, I've seen it done on a clarckconnect setup, until they started charging a subscription for such features. They just package a bunch of other people's "hard work/ingenuity" into a very nice gui and charge quite a bit for. I believe it's based on Centos/Redhat/Linux. It's quite reliable, I've been told. You might wanna check it out.