[Solved] 1.2.3 install on WRAP
-
Hi,
I try to install last pfSense release on my WRAP 1E, but it's not very easy.
I've been patched with this command the .img file before upload it on my CF, but the WRAP won't boot.
My .img :
bsd# boot0cfg -v -o nopacket /dev/md0 # flag start chs type end chs offset size 1 0x80 0: 1: 1 0xa5 444: 15:63 63 448497 2 0x00 445: 1: 1 0xa5 889: 15:63 448623 448497 3 0x00 890: 0: 1 0xa5 991: 15:63 897120 102816 version=1.0 drive=0x80 mask=0x3 ticks=182 bell=# (0x23) options=nopacket,update,nosetdrv default_selection=F1 (Slice 1)
On WRAP :
WRAP.1 v1.11 Wisp-Router.com Your Full Time Professionals 640 KB Base Memory 130048 KB Extended Memory 01F0 Master 848A HYPERSTONE FLASH DISK Phys C/H/S 1022/16/62 Log C/H/S 1022/16/62 1 FreeBSD 2 FreeBSD Boot: 1 #################
Anyone can help me or give me a working .img ?
Thanks a lot
-
http://doc.pfsense.org/index.php/NanoBSD_on_WRAP
-
It's what I've tried before writing on my CF ;)
-
D'oh….
Sorry didn't read your post right ::)I know that 1.2.3 is working on one of my WRAPs.
I can try to send you a copy of this CF as soon as i'm there again.
Probably wont be before next weekend. -
Also, you may need a BIOS update, my WRAP at home that works shows:
Geode PC Engines WRAP.1C/1D/1E v1.tinyBIOS V1.4a (C)1997-2005
So it's possible that you need to upgrade your BIOS from 1.11 to 1.4a
Failing that, you may want to post what the WRAPs current BIOS settings are, there may be something there that could be changed.
-
Thanks a lot all, I would to update my tinyBios but only the 1.11 is on pcengine.ch ?
My WRAP is an 1E-1 http://www.pcengines.ch/wrap1e103.htm
-
I've changed CHS mode to LBA mode on my 1.11 Bios an pfSense is now online !!
Thanks a lot all
-
That's good :-)
I guess 1.11 is newer than 1.4a anyhow, and you're right that is all I see on their site now.
Perhaps mine needs a BIOS update the next time I swap the CF.