VLANs kinda working but not quite =/
-
Hey.
I'm trying to set up this scenario:
http://doc.pfsense.org/index.php/HOWTO_setup_vlans_with_pfSense
Basically, we have a few wimax lines that we want to combine in a single NIC. The switch is a Cisco 2900XL.
I have set up the switch (this is the way you do it on this switch: http://www.cisco.com/en/US/tech/tk389/tk815/technologies_configuration_example09186a00800949fd.shtml) and have tested that vlans are working on it.
When in pfsense, after creating the vlan interface with the corresponding tag i get an ip from the dhcp server. If i connect the cable to a different vlan i get nothing. So far so good.
Here's the problem: nothing can be done. Even though i have an ip address i cannot ping anything, nothing can ping the ip of the vlan and browsing doesn't work. It's not the firewall since i've already created an allow all rule.
Any ideas? Thanks.
-
Nothing?
-
Can you show the switch configuration here? Also I'd like to see the pfSense rules and interfaces configurations. Also a simple diagram showing how you've got things connected would help.