Captive portal ip2name component for lightsquid

PetitOursonDeLu

Hello, thank you for your reply.
I tried to install the p5-DateTime package with the command pkg_add or pkg_add -r but it does not work.
There seems to be a lot of dependencies for this package. Can you use a "magical" command to manage these dependencies?
I have never configured freeBSD is quite complicated for me. Can you give me the procedure?

Thank you a lot

Sorry for my bad English :o

daniele_dll

pass the full url to pkg_add fetching it from freebsd 7.0 repository or pfsense 1.2 repository

Meulator

Can someone post a screenshot to see how it looks like?

despotadmin

I tried to work it but not success like "PetitOursonDeLu".

I install p5-DateTime with this command

pkg_add ftp://ftp.freebsd.org/pub/FreeBSD/ports/i386/packages-7-stable/p5-DateTime.tbz

Suggestion (```
pkg_add -r p5-DateTime


After that same error appears = Can't locate Date/Parse.pm .

I search /usr/local/lib/perl5/site_perl folder listed 5.8.8 and 5.8.9\. in folder named 5.8.9 has "DateTime" folder. I moved this folder to 5.8.8\. But error continues.
Then i add a "use DateTime;^M"  before "use Date::Parse;^M" in ip2name.portalauth.

It looks fine but i get another error :

/libexec/ld-elf.so.1: /usr/local/lib/perl5/site_perl/5.8.8/mach/auto/Params/Validate/Validate.so: Undefined symbol "Perl_newXS_flags"


It look like p5-DateTime packages doesn't installing right place.

PetitOursonDeLu

Hello
I would like to found out if anyone has found the solution to install p5-Datetime. And if anyone has it, can they please tell me.

Thanks, bye

PetitOursonDeLu

Hello,
I update PFsense 1.2.2 to 1.2.3 and I install with success p5-dateTime with this command line: pkg_add -r p5-DateTime.
But, I have evermore this message: Can't locate Date/Parse.pm in @INC (@INC contains: /usr/local/lib/perl5/5.8.8/BSDPAN /usr/local/lib/perl5/site_perl/5.8.8/mach /usr/local/lib/perl5/site_perl/5.8.8 /usr/local/lib/perl5/site_perl /usr/local/lib/perl5/5.8.8/mach /usr/local/lib/perl5/5.8.8 . /usr/local/www/lightsquid/) at /usr/local/libexec/lightsquid/ip2name.portalauth line 2.
BEGIN failed–compilation aborted at /usr/local/libexec/lightsquid/ip2name.portalauth line 2.
Compilation failed in require at /usr/local/www/lightsquid/lightparser.pl line 39

I slowly, but I still need your help.

Thanks

EDIT: the command line pkg_info return:
bsdinstaller-2.0.2009.0108 BSD Installer mega-package
db41-4.1.25_4 The Berkeley DB package, revision 4.1
gd-2.0.35,1 A graphics library for fast creation of images
grub-0.97_1 GRand Unified Bootloader
jpeg-6b_4 IJG's jpeg compression utilities
lightsquid-1.7.1_1 A light and fast web based squid proxy traffic analyser
openldap-client-2.4.10 Open source LDAP client implementation
openldap-client-2.4.11 Open source LDAP client implementation
p5-Class-Factory-Util-1.7 Utility functions for (factory) classes
p5-Class-Singleton-1.4 Perl module that describes a singular object class
p5-DateTime-0.43.02 A date and time object
p5-DateTime-Locale-0.40.01_2 Localization support for DateTime
p5-DateTime-TimeZone-0.77.01 Time zone object base class and factory
p5-GD-2.39 A perl5 interface to Gd Graphics Library version2
p5-List-MoreUtils-0.22 Provide the stuff missing in List::Util
p5-Params-Validate-0.89 Validate method/function parameters
p5-Time-Local-1.18 Efficiently compute time from local and GMT time
perl-5.8.8_1 Practical Extraction and Report Language
squid-2.6.21 HTTP Caching Proxy
squidGuard-1.3_1 A fast redirector for squid
squid_radius_auth-1.10 RADIUS authenticator for squid proxy 2.5 and later

PetitOursonDeLu

UP ???

paulmr2

If it is any help I managed to get this to work after a few days of trying, here’s how I done it:

1. Downloaded the TimeDate Perl module from http://search.cpan.org/~gbarr/TimeDate-1.16/

2. Copied the Date and Time folders from the download into /usr/local/lib/perl5/5.8.8

3. Followed the instructions on the thread

4. Corrected a typo in the ip2name.portalauth on the line

// Acquire the timestamp in unix format

change to

# Acquire the timestamp in unix format

This worked for me. I did try it on 1.2.3 but the portalauth.log file uses USER LOGIN instead of LOGIN and that was causing some problems with the script

HTH

PetitOursonDeLu

Yes! yes! yes! Thank you very much paulmr2, it's OK!

I love Pfsense :)

Freak

Hello,

At first of all thank you for this work!

I am new on pfSene!
I want to install this component on my system but for the moment I only have setup the captive portal on pfSense.

If I understand it right, before install the ip2name component I have to install and setup Squid in non-transparent mode (because transparent mode doesn't work with captive portal?) and than I have to install and setup the Lightsquid package?
Is it right?

Thank you! And sorry for my English I am french too.

Offliner

i used pf 1.2.3 squid(transparent mode) squid guard Captive Portal and Lightsquid and i want take a repor from the lightsquid ip2name captive portal login username but i cant make a report

how can i do it??

ps im sorry for my eng.

daniele_dll

Hi,

really, i didn't remember the right dependency to let this code to work: it needs Date::Parse library to works.

PetitOursonDeLu

Hi, sorry, I'm french but I have a solution for IP2name.
It's avaible here (it's my website): www.adrienbourget.com/wp-content/uploads/2010/05/ip2name.zip

By

Anderstend

Hello,

i found your solution of the portalauth for lightsquid… Thank you first for that, because the idee is very good!!!

But i have a problem, after rebooting pfsense all the traffic is related to the ip again... if i look in the report-folder of lightsquid the files with the usernames are already in...

i dont understand why lightsquid only shows the ip after rebooting and relates the traffic of the the user to the ip automatically...

Do you have a solution for that?

PetitOursonDeLu

Hello,
Sorry but I have no solution :(
I'm no expert, just advanced user …
Sorry, but if you find the solution, I would like to know.

Thank you.
Adrien

Anderstend

@PetitOursonDeLu:

Hello,
Sorry but I have no solution :(
I'm no expert, just advanced user …
Sorry, but if you find the solution, I would like to know.

Thank you.
Adrien

Ok, i will try… but i hoped you have a tip for me why this happens....

marcelofmatos

Hi! Thanks for all in this topic! It's solved my problem :)

I add a line to change text USER LOGIN or MACHINE LOGIN for LOGIN, to keep the format of the old log. I don't know much about perl and regular expressions, but it was enough to work for me

The modified script is attached.
Script tested on pfSense 1.2.3.

Also I installed the package p5-TimeDate to resolve problem to use Date::Parse on script

pkg_add -r p5-TimeDate

ip2name.portalauth.txt

KingJulien

Hi,

is there any possiblity to change the script to log the vouchers instead the users?

_igor_

Found that thread from 2009, but names in lightsquid still doesn't work today. Is there any plans to get this working? There are floating some hints around, but none of them works.

Nachtfalke

Hi,

for me it works with "IP" (resolves IP-addresses) and with "DNS" which resolves the FQDN like Host1.domain.
Do not know, if this works with vouchers but I don't think so.

I hope this is what your question is pointing to ?