NanoBSD USB wireless.

kew

Hello.
nanoBSD USB wireless adapter does not support ….?

I installed CF nanoBSD in 1g and does not recognize the adapter
wireless USB.

Saludos.

cmb

The drivers are the same as every other platform. If it's supported in FreeBSD 7.2, we support it. If not, it's not supported.

kew

The adapter is an EW-edimax 7318USG.
When I use 1.2.3-RC1 installed on HDD, whether it recognizes
the card as Rum0.
In nanoBSD is not recognized.

Greetings.

cmb

1.2.3-RC1 is FreeBSD 7.1, current snapshots are 7.2. It's possible there is a regression in FreeBSD related to that card. If you put it on a full install of current 1.2.3 snapshots from http://snapshots.pfsense.org does it detect it?

transcendentor

Take the if_rum.ko File from FreeBSD CD (/boot/kernel/)

Go in the WebGUI in "Diagnostics->Command Prompt".
Upload File over the "Upload" function.
The File will be upload to /tmp/

After Upload use also in "Diagnostics->Command Prompt" the "Execute Shell command" function to move the files to the right location.
Type in Command: "mv /tmp/*.ko /boot/kernel/" and click on "Execute"
Now the Kernel Module are on the right location.

Now edit the /boot/loader.conf File.
Go on WebGUI in "Diagnostics->Edit file".
Type in the field "Save/Load from path" this Text: "/boot/loader.conf" and click on "Load".
Add this 2 Lines at the end:

if_rum_load="YES"
wlan_load="YES"

and click on "Save"
Reboot pfSense.

Now you can Assign you card in the WebGui over "Interfaces->assign" whit the "Plus" and configure it.

cmb

I just noticed a kernel difference, I added rum to the embedded kernel. It'll be in the next snapshot built after this message (August 13 or newer for sure).

kew

:) thank all

Saludos.