PfSense on Nokia IP130

wolfgangh · Sep 2, 2009, 3:56 PM

Hi all,
I'm a longtime user of m0n0wall, but now i like to switch to sfSense (need the enhancements :) )
The m0n0wall runs fine on a Nokia IP110 (since 5 years), and i have another IP130 were i like to install pfSense.
Unfortunately, the system won't boot. It stops immediately when it trys to mount the / partition
Looks like this:

…
hptrr: no controller detected.
ad0: 38154MB <fujitsu mhv2040as="" 00000096="">at ata0-master UDMA33
Trying to mount root from ufs:/dev/da0s1a

Manual root filesystem specification:
<fstype>:<device> Mount <device>using filesystem <fstype>
eg. ufs:da0s1a
? List valid disk boot devices
<empty line=""> Abort manual input
...

So i thinks i'm missing some modules/drivers for the controller? How to get or to build?
Or any other hints?
I tried the embedded and also the stand. kernel, same result everytime :(

Thanks for help,
Wolfgang</empty></fstype></device></device></fstype></fujitsu>

wolfgangh · Sep 2, 2009, 5:14 PM

:)
Found the mistake.

I installed the HDD with a USB2IDE adapter. And this is a SCSI emulation.
The Nokia only kows about IDE, so i had to change the da0… to ad0...

-WOlfgang