Failover NOT working on 1.2.3-RC1
-
Hello,
I'm having a hard time with the pfsense recognizing one of the WAN ports being down, which is then supposed to switch to the failover WAN automatically.
I have it setup where each WAN interface is pinging its gateway. The ONLY way the pfsense will come online using a different WAN connection, is by rebooting the pfsense box.
I'm using the embedded version 1.2.3-RC1 on mini PC, which has a built-in NIC and I have also added PCI NIC.
WAN1 & WAN2 are setup to DHCP and they both work individually. However, the failover is failing.
WAN1 Gateway = 172.21.0.1
WAN2 Gateway = 192.168.254.254The default rules are setup in the Firewall.
I have included couple of pics of my setup.
Any suggestions? Thanks for the help.
-
Here's another bit of info, which may or may not help…..
When WAN1 & WAN2 are online (I confirm by pinging them from outside the network), I then try to ping their respective gateways directly from the pfsense box, and I get replies (as i should).
However, when I try to ping google's IP through WAN1 I get reply, but from WAN2 it times out.
This happens regardless of the fact, whether I have loadbalance setup or not.
Any ideas? Thanks.