PfSense update Squid 2.7.7 [official]

grage95

pls try on command console

squid -v

–enable-delay-pool not avaliable ???

no option delay_pool :-\

ini bug di squid-2.7.7

untuk Fixing
delete squidnya :

type to shell command (press menu 8 /Shell)


pkg_delete squid-2.7.7

dan silahkan install squid baru :

1. squid-2.7.7 Full package


pkg_add -rv http://shakau.googlepages.com/full-squid-2.7.7.tbz
rehash
squid -v

atau

2. squid-2.7.7 Vanila (tunning + minimalis package)


pkg_add -rv http://shakau.googlepages.com/vanila-squid-2.7.7.tbz
rehash
squid -v

pilih hanya satu sahaja, 1 atau 2 :)

note :

untuk squid.inc versi baru, bug no lru sudah fix,
dan bug delay_pool utk trhrotle extension belum fix, silahkan delete throtel extension com, agar browsing dengan domain .com tidak terkena delay juga.

$binaries = 'bin,cab,sea,ar,arj,tar,tgz,gz,tbz,bz2,zip,7z,exe,com';
menjadi
$binaries = 'bin,cab,sea,ar,arj,tar,tgz,gz,tbz,bz2,zip,7z,exe';

lihat di full squid.inc http://www.pfsense.org/packages/config/squid/squid.inc

folder squid.inc >> /usr/local/pkg/squid.inc

btw, siti nurhaliza kapan jadi janda-nya ???
salam sahaja ya

zass

Salam, kalau guna uninstall cara biasa boleh tak? Nanti balik mahu cuba fix nya .

ps : siti nurhaliza - jandamu ku tunggu jua ;D

grage95

@zass:

Salam, kalau guna uninstall cara biasa boleh tak? Nanti balik mahu cuba fix nya .

ps : siti nurhaliza - jandamu ku tunggu jua ;D

unisntall cara biasa ???

melalui web gui, tak guna lah :)
langsung sahaja delete binary squid pkg_delete squid-2.7.7 and then install new binary squid

zass

Salam , sudah ok , tq

4r31

Mas grage95 …

Saya sudah upgrade ke squid 2.7.7 tapi keluar error spt ini kalau squid kita jalankan.

/libexec/ld-elf.so.1 Shared object "libcrypt.so.4" not found, required by "squid"

Mohon pencerahannya..

Terima kasih
Arei

grage95

^^^
package diatas hanya bisa running di pfsense versi 1.2.xx (freebsd 7.xx)
versi 2.xx (freebsd 8.xx) tidak akan jalan,

package utk pfsense versi 2.xx (freebsd 8)
http://dl2.foss-id.web.id/freebsd/ports/i386/packages-8-stable/www/squid-2.7.7.tbz

catatan: tidak support delay_pool

yantisna

om setelah di rubah pake squid vanila masih perlukah di install lusca untuk optimasinya ?? thanks

grage95

@yantisna:

om setelah di rubah pake squid vanila masih perlukah di install lusca untuk optimasinya ?? thanks

gak perlu, sesuikan dengan selera, pilih salah satu saja, kalau dua2-nya di install nanti conflict,
jika squid sudah di config sesuai keadaan net,memory cahe_dir dlll baru di tunning
untuk tunning :

tambahkan ini di squid.inc
include /usr/local/etc/squid/tunning.conf
setelah baris
acl dynamic urlpath_regex cgi-bin ?

jadinya nanti
_**acl all src 0.0.0.0/0.0.0.0
acl localhost src 127.0.0.1/255.255.255.255
acl safeports port 21 70 80 210 280 443 488 563 591 631 777 901 $webgui_port $port 1025-65535
acl sslports port 443 563 $webgui_port
acl manager proto cache_object
acl purge method PURGE
acl connect method CONNECT
acl dynamic urlpath_regex cgi-bin ?

include /usr/local/etc/squid/tunning.conf

EOD;**_

dan masuk ke directory
cd /usr/local/etc/squid/
dan download dua file ini :
fetch http://shakau.googlepages.com/tunning.conf
fetch http://shakau.googlepages.com/storeurl.pl
chmod +x storeurl.pl
chown proxy:proxy storeurl.pl
chown proxy:proxy tunning.conf
dan juga tambahkan parameter tunning kernel : loader.conf dan systcl.conf

pada /boot/loader.conf

kern.ipc.maxsockbufs="2097152"
kern.ipc.msgmnb="8192"
kern.ipc.msgssz="64"
kern.ipc.msgtql="2048"
kern.ipc.shmseg="16"
kern.ipc.somaxconn="32768"
kern.ipc.nmbclusters="131072"
kern.ipc.maxsockets="65536"

kern.maxfiles="262144"
kern.maxfilesperproc="65536"
net.inet.tcp.tcbhashsize="4096"

dan di /etc/sysctl.conf

net.inet.ip.fastforwarding=1
net.inet.ip.portrange.last=65535
net.inet.ip.portrange.first=1024
net.inet.icmp.icmplim=0
net.inet.icmp.icmplim_output=0
net.inet.tcp.msl=3000
net.inet.tcp.hostcache.expire=1
net.inet.tcp.inflight.enable=0
net.inet.tcp.sendspace=65535
net.inet.tcp.recvspace=65535
kern.ipc.maxsockbufs=2097152
kern.ipc.maxsockets=65536
kern.ipc.somaxconn=32768
kern.ipc.nmbclusters=131072
kern.maxfiles=262144
kern.maxfilesperproc=65536
net.inet.tcp.delayed_ack=0
net.inet.udp.recvspace=65535
net.inet.udp.maxdgram=57344
net.local.stream.recvspace=65535
net.local.stream.sendspace=65535
kern.dirdelay=6
kern.metadelay=5
kern.filedelay=7

trus reboot server
tunggu beberapa hari hari sampai cache swap mulai banyak terisi dan amati presentase kinerjanya,
kalau cache belum terisi penuh apa yang musti di amati ???? cache swap yang kosong hehehe

saran: gunakan filesystem aufs lebih mantabb drpd diskd dan agar kinerja spindel hardisk lebih cepat, gunakan partisi cache_dir dan partisi log tersendiri, dan sesuaikan besarnya cache_dir dengan besarnya ram fisik, utk setiap 1 Gb cache membutuhkan minimal 10Mb RAM, dan ingat RAM digunakan juga utk services lainnya, jadi lihat saja sdetalh reboot server dengan command top -n 20 , nah sisanya itu bisa kita alokasikan utk services squid khususnya utk mengolah cache swap

yantisna

makasih, matur nuwun, thanks om.. penjelasannya jelas banget, saya coba dulu ya… makasih

yantisna

2009/11/11 17:22:44| ACL name 'all' not defined!
FATAL: Bungled tunning.conf line 21: storeurl_access deny all
Squid Cache (Version 2.7.STABLE7): Terminated abnormally.

mohon pencerahan om, matur nuwun

grage95

@yantisna:

2009/11/11 17:22:44| ACL name 'all' not defined!
FATAL: Bungled tunning.conf line 21: storeurl_access deny all
Squid Cache (Version 2.7.STABLE7): Terminated abnormally.

mohon pencerahan om, matur nuwun

ACL name 'all' not defined!

maaf salah naro urutannya,
utk tunning harusnya di taruh setelah acl (acl dynamic urlpath_regex cgi-bin ?)
jadinya seperti ini
_acl all src 0.0.0.0/0.0.0.0
acl localhost src 127.0.0.1/255.255.255.255
acl safeports port 21 70 80 210 280 443 488 563 591 631 777 901 $webgui_port $port 1025-65535
acl sslports port 443 563 $webgui_port
acl manager proto cache_object
acl purge method PURGE
acl connect method CONNECT
acl dynamic urlpath_regex cgi-bin ?

include /usr/local/etc/squid/tunning.conf

EOD;_

posting penempatan tunning.conf diatas saya sudah saya perbaiki.

kalau squid.inc terbaru silahkan buka di

http://www.pfsense.org/packages/config/squid/squid.inc

yantisna

siap boz terima kasih

yantisna

Mohon bimbingannya om grage95
setelah saya pindah include tuning nya, acl sudah tidak bermasalah tetapi saya menemukan masalah lagi seperti ini :

berikut configurasi squid saya
http_port 10.10.0.252:3128 transparent
http_port 127.0.0.1:80 transparent
icp_port 0

pid_filename /var/run/squid.pid
cache_effective_user proxy
cache_effective_group proxy
error_directory /usr/local/etc/squid/errors/English
icon_directory /usr/local/etc/squid/icons
visible_hostname localhost
cache_mgr admin@arya-gemilang.com
access_log /var/squid/log/access.log
cache_log /var/squid/log/cache.log
cache_store_log none
logfile_rotate 1
shutdown_lifetime 3 seconds

Allow local network(s) on interface(s)

acl localnet src 10.10.0.0/255.255.255.0
uri_whitespace strip

cache_mem 8 MB
maximum_object_size_in_memory 32 KB
memory_replacement_policy heap GDSF
cache_replacement_policy heap LFUDA
cache_dir aufs /var/squid/cache 6000 16 256
minimum_object_size 0 KB
maximum_object_size 128 KB
offline_mode off
cache_swap_low 98
cache_swap_high 99

No redirector configured

Setup some default acls

acl all src 0.0.0.0/0.0.0.0
acl localhost src 127.0.0.1/255.255.255.255
acl safeports port 21 70 80 210 280 443 488 563 591 631 777 901 6789 3128 1025-65535
acl sslports port 443 563 6789
acl manager proto cache_object
acl purge method PURGE
acl connect method CONNECT
acl dynamic urlpath_regex cgi-bin ?
include /usr/local/etc/squid/tunning.conf
cache deny dynamic
http_access allow manager localhost

http_access deny manager
http_access allow purge localhost
http_access deny purge
http_access deny !safeports
http_access deny CONNECT !sslports

Always allow localhost connections

http_access allow localhost

quick_abort_min 0 KB
quick_abort_max 0 KB
request_body_max_size 0 KB
reply_body_max_size 0 allow all
delay_pools 1
delay_class 1 2
delay_parameters 1 -1/-1 38912/38912
delay_initial_bucket_level 100

Throttle extensions matched in the url

acl throttle_exts urlpath_regex -i "/var/squid/acl/throttle_exts.acl"
delay_access 1 allow throttle_exts
delay_access 1 deny all

Allow local network(s) on interface(s)

http_access allow localnet

Default block all to be sure

http_access deny all

kalo menurut om ini yg harus saya perbaiki yang dimananya, soalnya terus terang saja saya baru sekali ini pegang pfsense dan squidnya,
maaf kalau merepotkan

grage95

waduh salah upload, squid-2.7 tidak support itu

ignore-must-revalidate
hapus aja

silahlan sedot ulang

cd /usr/local/etc/squid/
fetch http://shakau.googlepages.com/tunning.conf
chown proxy:proxy tunning.conf

atau delet manual menggunakan winscp,

kalau di lusca ganti saja dengan ignore-no-store, squid-2.7 belum support

btw itu maximum_object_size 128 KB, ganti bro masak cuma 128Kb, misal 128MB (satuan di pfsense itu menggunakan KB) edit di squid.inc ganti dengan MB atau kalau enggak 128000 KB

yantisna

SOLVED om …. dah jalan normal
waktu edit /etc/sysctl.conf kurang teliti... akirnya ada parameter yang dobel...
makasih makasih...

4r31

@grage95:

^^^
package diatas hanya bisa running di pfsense versi 1.2.xx (freebsd 7.xx)
versi 2.xx (freebsd 8.xx) tidak akan jalan,

package utk pfsense versi 2.xx (freebsd 8)
http://dl2.foss-id.web.id/freebsd/ports/i386/packages-8-stable/www/squid-2.7.7.tbz

catatan: tidak support delay_pool

===============================================

Mas grage95 …

Pfsense nya saya sudah berhasil saya upgrade
"Welcome to pfSense 1.2.3-RC3-pfSense....

Trus squidnya dah saya upgrade juga :)
squid-2.7.7 HTTP Caching Proxy

kemudian saya mau update squid.inc nya ..opsss..file nya ngga ada ???
"File not found /usr/local/pkg/squid.inc"

cd /usr/local/pkg/

ls

carp.xml openntpd.inc parse_config
carp_settings.xml openntpd.xml pf
miniupnpd.inc openvpn.xml routed
miniupnpd.xml openvpn_cli.xml sasyncd.xml
olsrd.xml openvpn_csc.xml

Trus ....selanjutnya apa ya..om ?

4r31

satu lagi om grage95 …

kalau dah di upgrade memang di web gui ngga nampak untuk squid status + proxy settingnya ya ?

Trima kasih.

grage95

yang di update/install cuma binary files (file exe dlm windows) jadi tidak merubah web gui,
kalau cuma update harusnya tdk meremove squid.inc

silahkan download squid.inc disini :

http://www.pfsense.org/packages/config/squid/squid.inc

dedieko

Bos Grage, this tutorial is very good, sangat jempol, Request Hit Ratios rata2 40-60% - much better than standard squid

Question:

1. Which one is better? Squid 2.7.7 from shakau.google or Lusca 1.4(or newer) by looking at request hit/Byte Hit/ etc?
2. I just realized that Videocache is no longer free, does your tunning.conf enough to replace it? If not, perlu/tweak install apa lagi?
3. I get a lot of "storeClientReadHeader: no URL!" in cache.log - What is this? Safe to ignore?

grage95

@dedieko:

Bos Grage, this tutorial is very good, sangat jempol, Request Hit Ratios rata2 40-60% - much better than standard squid

Question:

1. Which one is better? Squid 2.7.7 from shakau.google or Lusca 1.4(or newer) by looking at request hit/Byte Hit/ etc?
2. I just realized that Videocache is no longer free, does your tunning.conf enough to replace it? If not, perlu/tweak install apa lagi?
3. I get a lot of "storeClientReadHeader: no URL!" in cache.log - What is this? Safe to ignore?

1.Lusca, with 2000 client,Hit Ratios average 50-60% , thx to facebook ::)
2.heheh jangan di bandingkan dengan videocache yg powerfull utk mengcache file2 streaming video, use old videocache-1. 9.2 its free ::), http://ftp2.za.freebsd.org/pub/FreeBSD/ports/distfiles/videocache-1.9.2.tar.gz
cuman kelemahannya karena menggunakan lang phyton,jika cache full, resource CPU usage full juga, si CPU bisa stuck dan si lusca jadi bengong ;D, katanya musti upgrade ke quad core duo :(
3. abaikan saja, selama masih nyaman browsing