Cf card problems
-
Hi I have just installed the imbedded version onto a cf card from widows.
I am using a GB - 1500 ( http://www.gta.com/downloads/external/dataSheet/smeFamilyUs-s.pdf ) which looks great and has 4 x ethernet as well.
When I connect with a serial cable and watch the boot process I seeunknown: <pnp0400>can't assign resources (port)
unknown: <pnp0501>can't assign resources (port)
Timecounter "TSC" frequency 1395479946 Hz quality 800
Timecounters tick every 10.000 msec
Fast IPsec: Initialized Security Association Processing.
ad3: FAILURE - SETFEATURES SET TRANSFER MODE status=51 <ready,dsc,error>error=4<
ABORTED>
ad3: 61MB <toshiba thncf064mba="" 2.20="">at ata1-slave BIOSPIO
GEOM_LABEL: Label for provider ad3a is ufs/pfSense.Manual root filesystem specification:
<fstype>:<device> Mount <device>using filesystem <fstype>eg. ufs:da0s1a
? List valid disk boot devices
<empty line=""> Abort manual inputmountroot>
panic: Root mount failed, startup aborted.
Uptime: 37s
Cannot dump. No dump device defined.
Automatic reboot in 15 seconds - press a key on the console to abort
–> Press a key on the console to reboot,
--> or switch off the system now.any info appreciated
Thanks</empty></fstype></device></device></fstype></toshiba></ready,dsc,error></pnp0501></pnp0400> -
at the mountroot prompt put in:
ufs:ad3s1a
and hit enter. when you're booted up, edit /etc/fstab in Diagnostics -> Edit file and change da0 to ad3.
-
yea thought so but it looks like the card is duff so i will find another
g_vfs_done():ad3a[READ(offset=90365952, length=8192)]error = 5
g_vfs_done():ad3a[READ(offset=90365952, length=8192)]error = 5
g_vfs_done():ad3a[READ(offset=90365952, length=8192)]error = 5
Jan 1 00:00:51 init: _secure_pagth: cannot stat _/etc/login.conf:v Input/output
erfror
sJan 1 00:00:51 _init: login_getcdlass: unknown cloass 'daemon'
ne():ad3a[READ(offset=90365952, length=8192)]error = 5
Jan 1 00:00:51 ginit: _secure_pa_th: cannot stat v/etc/login.conf:f Input/outpu
t ersror
_done():ad3a[READ(offset=90357760, length=8192)]error = 5
Jan 1 00:00:51 init: can't exec /bin/sh for /etc/rc: Input/output errorg_vfs_done():ad3a[READ(offset=90365952, length=8192)]error = 5
g_vfs_done():ad3a[READ(offset=90365952, length=8192)]error = 5
g_vfs_done():ad3a[READ(offset=90365952, length=8192)]error = 5
g_vfs_done():ad3a[READ(offset=90365952, length=8192)]error = 5
g_vfs_done():ad3a[READ(offset=90365952, length=8192)]error = 5
g_vfs_done():ad3a[READ(offset=90365952, length=8192)]error = 5
g_vfs_done():ad3a[READ(offset=90365952, length=8192)]error = 5
g_vfs_done():ad3a[READ(offset=90365952, length=8192)]error = 5
g_vfs_done():ad3a[READ(offset=90365952, length=8192)]error = 5
Enter full pathname of shell or RETURN for /bin/sh: -
fitted new cf card and it just booted straight up :)