Slow WAN on 1.2.3 rc3
-
Hi Pfsense….
Just upgraded from 1.2.2 to 1.2.3 rc3 due to the facts that we need
support for INTEL igb drivers , on dedicated 100 mbit line.We have a supermicro server 5500 nehalem 2.33 Ghz with 2 igb and
2 em netcards...We are not using any traffic shaping and just copied or setup from
the 1.2.2 setup....After the upgrade i can not move more that 2.5 mBit over SSH on a
20 mbit line the numbers before was ca 14-15 mbit....Someone has the same problem ???????
Thanks
Michael
-
Could it be?
http://forum.pfsense.org/index.php/topic,20797.0.html -
SSH is not a valid test of speed. Try using a speedtest website to get a baseline, or better yet, put the machine on a test network and use a network traffic generator to stress test your device. Tools like IPerf are excellent for this purpose.
-
Agreed. I was seeing about 12mb/sec between my pfsense gateway and my main linux server, despite being on a gig switch. I installed iperf and tested both ways and get about 800mb/sec.
-
Yes i have solved the problem , please check the link perry send…
Thanks a lot , now it's much much faster....
/Michael