Port 80 (HTTP) issue
-
hello guys,
i got confused for port 80.
port 80 was used for browsing webpage, while in this port, user can download any application.how i can limit port 80 for download leecher ?
i set the traffic shaper at qp2p_up n qp2p_down in 64Kb
it work for leecher, limit the downloader about 64Kbbut for net surfer, 64Kbps seems like to slow…. i need it set to about 256Kb
how can it set in traffic shaper?
thanks
-
no one suggestion ??? :(
-
I think maybe you can set it to burst traffic for xx milliseconds, if this is set correctly then web-surfers will get xx bandwidth for xx milliseconds, allowing a typical page to download fast. But after xx milliseconds it will slow down, this would kind of make downloads slow.
I think this is correct, do a search for burst.
-
bursting is a good idea, but consider the worst case like this:
- i have 20 pc stations, but temporary only 10 actives
- i only have 1Mbps downlink
- if i limit 64kbps, burst 128kbps…, it means i must be had 128kbpsx10stations = 1280kbps which mean i dont have enough bandwidth :(
-
bursting is a good idea, but consider the worst case like this:
- i have 20 pc stations, but temporary only 10 actives
- i only have 1Mbps downlink
- if i limit 64kbps, burst 128kbps…, it means i must be had 128kbpsx10stations = 1280kbps which mean i dont have enough bandwidth :(
That doesn't work like that. Those numbers are maximum values for the whole queue, not for individual users.
BR,
Tommi
-
so thats not a good method that i need…
-
Have you at least tested it to see?
-
finally, after several trial n error, i decided use squid… there is an option , which is throttle bandwidth...
-
One problem with using bursting to "prioritize" web browsing over http downloads is that you need to set a hard upper limit as m2, meaning that even if there is only 1 client online, he can only use that limited bandwidth to download, which is a bit of a waste IMO.
It would be nice if there was some way to give a higher priority to bursts without having to specify a hard limit, so that the full bandwidth could be used at all times…