Pfsense and VLAN Problem
-
Hi All,
I had trouble with setting VLAN by Pfsense and Switch L2 Asus.
On PC running Pfsense Ver 1.2.3 I have 2 Netword Card
Eth0 - Connect to modem to Internet
Eth1 - Giga speed network conect to switch L2
On eth1 i was create 3 VLAN and setup DHCP Server on each VLAN, everything seem ok. But when I connect PC client ( running windows XP SP2) to port on L2 switch were setting for Tagged with Pfsense VLAN it cannot communicate with VLAN - It can not receice IP from VLAN DHCP. But when I change testing to pc running windows 7 everything was success in same port with same setting i can get IP from VLAN DHCP Server and connect to Internet from any VLAN.
I dont know what happened to my network, this is my first VLAN setting so i have not much experience about this.
Any body can help me to find some thing wrong with my network setting i cant change all of PC to Windows 7.Thanks in advance.!
-
Well it sounds like it should work.
My recheck book contains.
CIDR is correct on opt lan, DHCP is auto on client, change cable, boot from a livecd like ubuntu.else post some screenshots.
-
Thanks for reply,
I'm not yet try on client running Linux I will try late and give the response to you. About setting on pfsense i think is not trouble, anyway I will look more again.
Thanks
-
I'm not sure if i understood your description correctly, but is the port on the switch going to the client tagged or untagged?
-
I found the reason is network card on pc client doesn't support VLAN, and then I try to update driver for network card and now everytihing is OK but new problem is we have alot of Realtek 8139 network and is not support VLAN although i was update to newest driver.
-
Clients doesn't need vlan support nics. ports that they are connected to should be set as untagget.
pfsense <–--tagget----> asus switch <----untagget---->clients
-
Oh thanks for your idea, It is realy clear to me.
Thanks again.!