Can 1.2.2 embedded upgrade to 1.2.3?
-
I am a Chinese, and my English is poor.
An old 1U firewall,I want to fix it.
Because it has no VGA output, I tried to install pfsense embedded version.
But i find that 1.2.3 nanobsd(i tried all version:512,1g…) cannot be installed.
So I had to install 1.2.2 embedded version and it works good,but when i try to upgrade it to 1.2.3,it failed.
Error messages:
Fetching file…
looking up 192.168.200.7
connecting to 192.168.200.7:21
setting passive mode
opening data connection
initiating transfer
remote size / mtime: 55730314 / 1263666329
/root/firmware.tgz 75% of 53 MB 4482 kBps 00m03s
/: write failed, filesystem is full
/root/firmware.tgz 80% of 53 MB 4492 kBps 00m02s
fetch: /root/firmware.tgz: No space left on deviceWarning: filesize(): Stat failed for /root/firmware.tgz (errno=2 - No such file or directory) in /etc/rc.initial_firmware_update on line 58
File size mismatch. Upgrade cancelled.
-
Sorry…
I have read the upgrade guide.
Only the new nanobsd-based embedded supports upgrades
Then can anybody tell me how to install a nanobsd version to a harddisk?
-
You would need to connect the hard drive to another system and use dd to write the image to the disk.
-
You would need to connect the hard drive to another system and use dd to write the image to the disk.
Thanks for your answer.
I used a HDD Enclosure to install 1.2.2 with dd and was succeed.
Should I link the harddisk directly to my pc to install 1.2.3 nanobsd?
-
1.2.2 and 1.2.3 embedded should install the same way with dd, if that worked for 1.2.2 it should work for 1.2.3.