No automatic connect to ISP

eri--

Post the 1.2 mpd log as you did for 2.0 to verify this.

_igor_

Here we go:

Edit: the whole thing is too long, added the whole file.

eri--

It is something regarding your ISP that does not de-authenticate you correctly and something has changed in mpd to make it more strict on later versions.
It needs more investigation and more time though i have not much as of now.

Though you can take a packet trace and attach it here so i can follow later on.

_igor_

ok, will do. Should I do it with the 2.0 or the 1.2.3? I think it should be tcpdump, but how should I do this? Looked around the man-page, but i don't understand it much.

Should it be like this?

tcpdump -i bge0 -n ether proto 0x8863 '||' ether proto 0x8864

assuming that bge0 is my wan-interface.

_igor_

ok, the tcpdump in the mentioned way only worked with pfSense 1.2.3, so for 2.0 I did 2 separate tcpdumps. Strange…
Hope it helps.

First I disconnected the wan-IF, auto-connect worked on 1.2.3, so no further things to do. Surfed around, disconnected some times.
Same on 2.0, except the failing autoconnect. So I connected via Button, surfed, disconnected and connected several times.

If you need more, tell me please.
I zipped the files and attached .txt to upload it. Please remove the .txt to get the zip back.

tcpdump.zip.txt

ambo

@ermal:

something has changed in mpd to make it more strict on later versions

It seems to me that mpd stops reconnecting when it experiences a connect fail or auth fail. Can't say whether this is a feature or a bug but it is definitely a problem.

Even a connection that has auth failed should be retried periodically since the reason for the failure can go away and one would expect pfSense to recover from this within a reasonable time and without intervention.

Guest

I have a similar problem, PPOe disconnects every day, and don't connect back again automatically, I have to do it manually, with version 1.2.3 and previous this work perfectly, if ppoe disconnects for any reason it reconnects automatically.

nocer

Hi.

I've no clue how it was done in 1.2.x but just wondering if you guys force mpd to re-establish a connection by adding "set bundle no noretry" into appropriate section of your interfaces.inc. This will force mpd to re-connect whenever the keep-alive expires. Or sit tight and wait for it'd be fixed eventually in any later builds…

cheers,

_igor_

Thanks much! I'll try it.

Michael Sh.

This problem not only for PPoE.
I use separate PPTP mpd client connection. After linkdown sometimes reconnect sucsessful, but many times not.
Additional:
1. Cannot set MTU for PPTP link.
2. Static routes for PPTP link not activating after link down/up.

_igor_

It doesn't work. As I can see, mpd dies when a disconnect occurs. Logs show this: (reverse order)

Jan 17 19:58:47 mpd:
Jan 17 19:58:47 mpd: Multi-link PPP daemon for FreeBSD
Jan 17 19:58:46 mpd: process 37549 terminated
Jan 17 19:58:44 mpd: caught fatal signal term
Jan 17 19:57:41 last message repeated 7 times

cat /var/etc/mpd_wan.conf
startup:
pppoeclient:
new -i pppoe0 pppoeclient pppoeclient
set iface route default
set iface enable on-demand
set iface idle 0
set iface enable tcpmssfix
set iface up-script /usr/local/sbin/ppp-linkup
set iface down-script /usr/local/sbin/ppp-linkdown
set iface addrs 192.0.2.112 192.0.2.113
set bundle disable multilink
set bundle no noretry
set auth authname "xxx"
set auth password "yyy"
set link keep-alive 10 60
set link max-redial 0
set link no acfcomp protocomp
set link disable pap chap
set link accept chap
set link mtu 1492
set ipcp yes vjcomp
set ipcp ranges 0.0.0.0/0 0.0.0.0/0
set ipcp enable req-pri-dns
set ipcp enable req-sec-dns
open

Guest

¿Any news about this?

I'm working with latest version, 2.0-BETA1 built on Fri Jan 22 00:26:29 EST 2010, and this problem persists, every morning I've to manually connect to my ISP.

_igor_

Does the option "set bundle no noretry" help? Did you try it?

nocer

Hi,

Again I have no clue about 1.2.x but auto-reconnect just works fine for me with;

set link max-redial 0
set bundle no noretry
(set link keep-alive 5 15) <- 10 60 is way too loooooooong to me

into my mpd.conf, just to clarify, I tested this by disconnecting utp to the modem, wait 'till keep-alive expired
then connect the utp to the modem again, link re-established again. Need to flush routing table some times.
Any chances to try on-demand mode instead if you've outgoing traffic constantly.

It's about to consider moving to mpd5 since it's been there for a while and quite stable for now…

cheers,

Guest

Thanks for your comments, I did it yesterday, adding the "set bundle no noretry" and it seems to be working:

$mpdconf .= << <eod<br>set bundle disable multilink
set auth authname "{$wancfg['pppoe_username']}"
set auth password "{$wancfg['pppoe_password']}"
set bundle no noretry
set link keep-alive 10 60
set link max-redial 0
set link no acfcomp protocomp
set link disable pap chap
set link accept chap

If it's fails again I will try with "set link keep-alive 5 15"

Thanks</eod<br>

Guest

It fails again, so I'll try with, "set link keep-alive 5 15"

Besides I update to latest version (2.0-BETA1 built on Mon Jan 25 20:57:42 EST 2010)
The modifications goes away with firmware updates, so I've to re-write these modifications.

Regards
Alfredo

_igor_

In my case none of the otions work. Connection fails every several hours. Its a really awful thing. Its beginning to drive me a bit crazy. I'm thinking that the whole thing fails because of routing. There is a default route to ISP-IP, but the whole thing looks a bit strange to me:


default	               195.14.226.7	UGS	0	42483	        1492	        pppoe0	 
10.0.0.0/27	        link#3	        U	8	248149868	1500	        bge1	 
10.0.0.1	                link#3	        UHS	0	1068827	        16384	lo0	 
10.0.0.32	                link#9	        UHS	0	0	                16384	lo0	=>
10.0.0.32/29      	link#9	        U	0	0	                1500	        ral0_wlan0	 
87.78.x.y	                link#8	        UHS	0	0	                16384	lo0	 
127.0.0.1             	link#4	        UH	0	4289065	        16384	lo0	 
127.0.0.2	                127.0.0.1	        UHS	0	1068827	        16384	lo0	 
195.14.226.7      	link#8	        UH	0	0	                1492 	pppoe0

Where is the use of Link 8? Transfer 0 byte? Both related to my ISP! No use of the links. And last but not least, on dashboard my WAN-gateway is stuck on "Gathering data". Apart from the fact that the whole routing seems to be on heavy construction. Therre was a time when I could change things in the routing, but since a time I cannot do anythiong there, only errors appear there. Maybe I'm wrong, but it looks a bit strange to me.

jimp

I'm in a rather unique situation to test this repeatedly, as I control both ends of the PPPoE link I have a test box hooked to. I have a 2.0 test box sitting on my test PPPoE DSL line at work and I also control the router on the other end of the link, so I can boot it at will.

I did confirm (as others have seen) that not only does PPPoE not reconnect, if the interface is unplugged at boot time, it doesn't try to connect initially either.

If I use "set bundle no noretry" it falls into a loop where it just constantly tries to connect after making a good PPPoE link. I see it authenticate on the ISP end and MPD immediately says the link has gone and tries to redial. The keep alive settings made no difference.

If I get some more time tomorrow at work I'll try to tinker with this, but it may have to wait for the weekend.

_igor_

This are great news! The "set bundle no noretry" doesn't help. Same as before. :-( But I'll wait and then try with a new install. Maybe that helps.

MegaV

For me the same problem. Here my subject :http://forum.pfsense.org/index.php/topic,22145.0.html
Correction mpd_wan.conf has not helped.
The problem what is not right enough for MPD for change of a configuration of interfaces can?
Excuse for bad English language, I badly know it.